Bang & Olufsen Beolab 4000 MKII 6642 Bedienungsanleitung

BeoLab 4000 MKII

Type 6642, 6643, 6644, 6645, 6646, 6647, 6648

Service Manual

English

German, French, Italian, Spanish, Danish, Dutch and Japanese versions

are available in the Retail System

This Service Manual must be returned

with the defective parts/back-up suitcase !

CONTENTS

Survey of modules .................................................................... 1.1

How to service .......................................................................... 1.2

Warnings – Insulation test ......................................................... 2.1

Adjustments ............................................................................. 3.1

Repaie tips ................................................................................ 4.1

Replacement of modules ........................................................... 5.1

Speciﬁcation guidelines for service use ...................................... 6.1

Block diagram ........................................................................... 7.1

Wiring diagram ......................................................................... 7.1

Available parts .......................................................................... 8.1

PCB01 Ampliﬁer

PCB02 SMPS

PCB03 Main PCB

PCB04 LED

Survey of modules

Survey of modules 1.1

How to service

Front line service

BeoLab 4000 MKII is to be serviced in the customer’s home when it comes to

electrical symptoms or exchange of mechanical parts. In this way you avoid having

to make more than one visit and using minimum of time on the case, all for the

beneﬁt of the customer.

BeoLab 4000 MKII has been split-up into as few service items as possible. Each

service friendly item is packed individually, prepared for worldwide transport, and

has a separate seven digit spare part number to be found in the Service Manual or

on the Bang & Olufsen Retail System. The exploded view drawing will show the

service spare parts.

All necessary electrical modules and the two loudspeaker units can be ordered to

prepare front-line service. Cabinet parts must also be brought with you separately,

if to be replaced in the customer’s home.

To improve the quality and secure a better service please send the defective part

for quality analyse purposes to:

Att:

Bang & Olufsen Operation a/s

Att.: JEB 7210-3

Peter Bangsvej 15

DK-7600 Struer

Please remember to ﬁll-in a fault description (part no.: 3542206).

Delivery

There is several type numbers for BeoLab 4000 MKII, however, this is only due to

market approvals. All types can be used on all markets with 100 to 240 V (ac)

mains voltage. When you order BeoLab 4000 MKII (set of two) two mains cables

and two Power Link cables are included.

Installation and setting-up

Only the switch for Left, Right or Line must be set into correct position as

described in the User Guide, before Power Link or a Line signal and AC power

wires are connected. If Power Link is used, the switch is for Left or Right setting. If

a Line signal (0 to 1V) is connected (via phono-male to PL Line-in) part no. see

Parts not shown) the switch must be set to Line position. See more details in the

User Guide. The LED will indicate on (green) or off (red).

Fault Finding

Before troubleshooting is initiated, let the customer demonstrate the fault, if

possible. There are four electrical modules in the product. Therefore a faulty

module is easy to point out in most cases. The PCB’s has been divided into:

PCB01, Ampliﬁer - PCB02, SMPS - PCB03, Main PCB and PCB04, LED.

No special service programs are available in this product or via the ServiceTool.

If there is a fault in the PCB02, SMPS or PCB01, Ampliﬁer the LED is typically off.

Replacement

Each loudspeaker is individually adjusted from production to ensure optimal stereo

perspective. When replacing a speaker unit bass/treble level have to be adjusted.

On the back of the new unit will be printed a rated value for the sensitivity of the

particular unit. The rated value is rated in dB.

1.2 How to service

Warnings

ESD

When electrical replacement or disassembly is taking place, use an ESD-mat. The

internal electronics are very sensitive to static electricity.

Handling

Wear cotton gloves to avoid any ﬁngerprints on the product.

The surfaces on the product are very sensitive, so handling should be done with

great care to avoid damage.

Cleaning

Clean the surfaces of the BeoLab 4000 MKII using a soft, lintfree cloth which you

have wrung ﬁrmly in a solution of lukewarm water containing a few drops of mild

household cleaner, for example a dish washing detergent. The cooling ﬁns on the

rear may be cleaned using a soft brush or a vacuum cleaner. The front cloth may

be cleaned with a vacuum cleaner set to the lowest level.

Note: Never use alcohol or other solvents to clean any part of the BeoLab 4000 MKII !

Insulation test

The product must be insulation tested after having been dismantled. Make the test

when the set has been reassembled and is ready to be returned to the customer.

Flashover must not occur during the test.

Make the insulation test as follows:

Short-circuit the two pins of the mains plug and connect them to one of the

terminals of the insulation tester.

Connect the other terminal to ground on the Power Link socket.

NOTE!

To avoid damaging the product it is essential that both terminals of the insulation

tester have good contact.

During the test the current must not exceed 10 mA.

Slowly increase the voltage on the insulation tester until a voltage of 2.5 kV (ac) is

obtained. Maintain the voltage level for one second, then slowly decrease the

voltage to 0 V (ac).

ESD

ESD-Mat

Warnings – Insulation test 2.1

Adjustments

Adjustments after replacing PCB03, Main PCB

Read out the adjustment position of the old potentiometers, R301 & R312, and

set the new potentiometers to the same position.

Adjustments of bass/treble levels

Each loudspeaker is individually adjusted from production to ensure optimal stereo

perspective. When replacing a speaker unit or PCB03, Main PCB, bass/treble levels

have to be adjusted. On the back of the new speaker unit will be printed a rated

value for the sensitivity of the particular unit. The rated value is stated in dB and

have to be converted to a mechanical position of the two potentiometers by using

table 1 and ﬁg.1.

After replacing a speaker unit

- Adjust treble level by means of (R301) and the bass level by means of (R312).

These two potentiometer are accessible via the two holes in the socket well, see

ﬁg. 1.

- Adjusts according to the drawing and table 1. Only the potentiometer of the

replaced unit have to be adjusted.

WARNING: Do under no circumstances adjust the level of a unit that has not been

replaced!

Table 1

‘‘Clock position’’

(The new position

of the

potentiometer)

Bass deviation ±dB Treble deviation ±dB

0830 +3.1 +3.9

0900 +2.7 +3.3

1000 +1.8 +2.2

1100 +0.9 +1.1

1200 0.0 0.0

0100 -0.9 -1.1

0200 -1.8 -2.2

0300 -2.7 -3.3

0330 -3.1 -3.9

Fig.1

LINE

1 2

POWER

LINK

W T

3.1 Adjustments

Repair tips

Hum in loudspeaker when no music is played

The Power Link cable must be of type MK III or higher.

The ground connection in Power Link cable lower than MK III may be insufﬁcient

for optimum sound performance.

Power Link

MK III

Check loudspeaker units

The loudspeaker units can be checked by an ohm-meter.

OK values for tweeter and woofer are approx. 6 W.

How to check the Switch Mode Power Supply

- Take off the bafﬂe.

- Connect an audio signal (set the input switch corresponding to the applied signal).

- Connect mains, 100 - 240V.

- Conﬁrm 12V standby on PCB02, SMPS P2 pin 6, GND pin 3 (if not OK, replace

PCB02, SMPS).

- Conﬁrm 12V HT_ON, on PCB02, SMPS P2 pin 8 (if not OK replace PCB03, Main

PCB).

- Conﬁrm ±12V on PCB02, SMPS P2 +12V pin 1, 2 and -12V pin 4, 5 (GND pin 3).

If not OK replace PCB02, SMPS.

Repair tips 4.1

4.2

5.1Replacement of modules

Replacement of modules

Modules that can be replaced

BeoLab 4000 MKII in service position ......................... 5.2

Replace PCB01, Ampliﬁer .......................................... 5.4

Replace PCB02, SMPS ................................................ 5.5

Replace PCB03, Main PCB ......................................... 5.6

Replace PCB04, LED ................................................... 5.7

Warning – Static electricity

Static electricity may damage the product.

A static-protective ﬁeld service kit must always be used when the product is

disassembled or modules are being handled.

Notice!

All modules must be placed on the ESD-mat or in an ESD-proof bag.

Purpose of replacement of modules

Short instructions for replacement of the available modules, with reference to

additional illustrations:

- The correct sequence for replacing modules.

- Text and illustrations.

- Reference to adjustment.

Adjustments

After replacing PCB03, Main or a loudspeaker an adjustment is required, see

adjustments.

ESD

ESD-Mat

5.2 BeoLab 4000 MKII in service position

- Remove front frame

LIN E

1 2

POWER

LINK

- Remove proﬁle

- Remove screws for bafﬂe

- Remove cables connected to BeoLab 4000 MKII

TX10

10x

TX10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bang & Olufsen Sprecher Handbücher

Bang & Olufsen

Bang & Olufsen Beolit 20 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 6000 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beosound A5 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEOLAB 8002 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beovox CX50 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 4 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beolit 15 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 6000 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay A9 3rd Generation Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 1 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay P6 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beolit 15 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoSound 2 3rd Generation Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 19 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 90 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 8000 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoPlay A1 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay M3 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beovox S35 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoSound 35 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEOLINK VIDEO Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoPlay A9 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen beolab 12 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoPlay A9 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung