Install the BWA-BK-009 Bracket Assembly on the Q45VA
Read these instructions before using your Sure Cross radios. Do not discard these instructions. For more detailed information
about installing and using your Sure Cross products, download and read the Sure Cross Wireless I/O Network Manual (p/n
132607
).
Equipment (included in BWA-BK-009 bracket assembly):
• Screw Retainers (2)
• Base Plate (1)
• Phillip head Screws (4)
• Set Screw (1)
• Disc (1)
Recommended (not included) items:
• 262 Series Loctite (hardens after 10 minutes, full core hardens after 24 hours) or an equivalent glue
• Urethane or Epoxy able to withstand environment's temperature range (see step 9.)
Final Assembly BWA-BK-009 Bracket and Q45VA Assembly Exploded View
1. Flip the Q45VA upside down.
2. Insert the screw retainers into the two slots of the device and align the screw holes with the holes at the bottom of the
Q45VA.
Q45VA Bracket Assembly Quick Start Guide
Original Document
208986 Rev. B
6 December 2018
