Barco UST Bedienungsanleitung
ENABLING BRIGHT OUTCOMES
Installation manual
For G60 W projector
UST lens
Registered office: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
3
About the manual
This user manual is designed to assist the installation of the R9801785 lens on the G60 W series projector.
Before attempting to mount the UST lens, please read through this document in full order to ensure all
installation steps are clear.
Overview
•Specifications of the UST lens
•Safety precautions
•Required accessories and tools
•Necessary steps when installing the UST-lens on the G60
R5910942 /03 UST lens
Introduction &
preparation 1
R5910942 /03 UST lens4
1.1 Specifications of the UST lens
Overview
Throw ratio 0.361 (120”)
Focal length 9.49-9.55
F number 2.4
Zoom ratio No zoom
Throw distance 0.96-3.01m
Screen size 120”to 400”
Lens
configuration
3 group 23 elements
Brightness ratio 70% (for reference)
Net weight 2.715 kg
Lens specification table
Screen
diagonal
(inch)
W (cm) H (cm) P (cm)1A (cm) B (cm) C=PD
(cm) L (cm) Height of
feet (cm)
120 258,3 161,5 19,9 78,2 13,6 96,3 82,6 1,44
130 280,0 175,0 19,9 83,8 21,0 103,6 82,6 1,44
140 301,5 188,5 19,9 89,5 28,3 110,9 82,6 1,44
150 323,0 201,9 19,9 95,1 35,6 118,2 82,6 1,44
160 344,6 215,4 19,9 100,8 42,9 125,5 82,6 1,44
170 366,2 228,9 19,9 106,4 50,3 132,9 82,6 1,44
180 387,7 247,3 19,9 112,1 57,6 140,2 82,6 1,44
190 409,2 255,8 19,9 117,7 64,9 147,5 82,6 1,44
200 430,7 269,3 19,9 123,4 72,2 154,8 82,6 1,44
250 538,5 336,6 19,9 151,7 108,8 191,5 82,6 1,44
300 646,2 404,0 19,9 179,9 145,5 228,1 82,6 1,44
350 754,0 471,3 19,9 208,2 182,1 264,7 82,6 1,44
400 861,6 538,6 19,9 236,5 218,7 301,3 82,6 1,44
Introduction & preparation
1: feet turned completely in
R5910942 /03 UST lens 5
H
A
P
C
L
B
Image 1-1
242,0
140.0
280.0
280.0
310.0
310.0
99.0
99.0
100.0
100.0
4-M6X1.0P L10
484,0
509,0
529,0
111,3 73,6
Image 1-2
1.2 Safety precautions
Overview
•Installation and adjustments should be performed by qualified technicians or authorized service dealers.
•Do not look into straight into the projector lens during the operation. The bright light may cause permanent
eye injury.
•Make sure no personnel or object is in the light path of the projector during the operation.
•Do not place the projector on an unstable surface to prevent product damage and human injury.
•Failure to follow the control, adjustment or operation procedures may cause damage by the exposure.
Introduction & preparation
R5910942 /03 UST lens6
1.3 Required accessories and tools
Overview
Check if all items in the table are included in the package.
Image Description Quantity
AUST lens 1
BUST lens boresight module 1
CLens mount bracket 1
DBracket 1
ELens support 1
FM3 x L8 screw 2
GM3 x L8 hex screw 3
HM6 x L22 hex screw 2
IM3–3.7 x 0.8 x 18 washer 3
JM6-6.7 x 1 x 16 washer 2
KBoresight extender 3
LL-shape tool 1
Required tools
The following tools are required for installing the UST lens:
•#2 Philip screwdriver with magnetic tip (long neck)
Introduction & preparation
R5910942 /03 UST lens 7
•L shape tool (provided in the lens package)
•2.5 mm Allen wrench
•5 mm Allen wrench
1.4 Necessary steps when installing the UST-lens
on the G60
Handle as follow
1. Software preparation of the projector to receive the UST lens.
1. First you need to put the lens holder in the position suited for the UST-lens and the brightness needs to be
reduced during the setup process. This is initiated by pressing a series of keys on the local keypad or on
the remote control unit. The software will do the rest automatically.
2. After the setup and calibration is done, you need to let the projector know that the setup is done. After this
command, the projector will switch off and it will know the setup is done. The lens shift is then fixed and the
brightness is again put at maximum.
2. Mechanical preparation of the projector to receive the UST lens.
In this part, a lot of steps need to be done to correctly install the UST-lens.
3. Adjust the lens optically.
In this part, the UST lens is adjusted in sheimpflug and back focal distance by using the correct procedure.
Introduction & preparation
R5910942 /03 UST lens10
2.1 Software preparation of the projector to receive
the UST lens
About the software preparation
Set the start mode of the projector to get it ready for the UST lens installation. During the setup process, the
projector reduces the image brightness and performs a lens calibration to bring the lens holder in the correct
position for use with the UST-lens.
How to set
1. Connect the AC power cord and switch on the power button.
2. Turn on the projector.
3. Enable the UST Install mode. There are 2 possibilities:
1. You have another projection lens available: use the on screen display (OSD) menu.
a) Select Menu →Settings/Service.
b) Enter the service password “1”,“5”,“9”,“0”on the remote control and press OK.
c) Select UST Install →Start.
2. You do not have another lens available: use the shotcut keys on the local keypad
a) Enable the UST Install mode by pressing the following keys on the local keypad or on the remote
control unit: ‘Exit / Input / Left / Right’.
Z
INPUTEXIT
MENU
LENS
FOCUS
OOM
ENTER
Image 2-1
ON OFF
21 3
54 6
87 9
Gamma Bright Cont. PIP
0
Info
Mode
Auto Input
Menu Exit
Hot Key
Shutter
(AV Mute)
Pattern
Focus
Lens H
Lens V
Keystone H
Keystone V
Zoom
Enter
Image 2-2
4. A lens calibration is performed automatically.
5. After the calibration, the projector will automatically shut down. If not, press the “Exit”key on the remote
control to power off the projector and making it ready for the install of the UST-lens.
Installation
Andere Handbücher für UST
1
Inhaltsverzeichnis
Andere Barco Linse Handbücher
Barco
Barco QVD (7:1) Bedienungsanleitung
Barco
Barco UST-Lens Bedienungsanleitung
Barco
Barco R9849975 Bedienungsanleitung
Barco
Barco QCLD (1.1 - 1.3:1) IRIS Bedienungsanleitung
Barco
Barco R9849975 Bedienungsanleitung
Barco
Barco TLD Bedienungsanleitung
Barco
Barco UST Bedienungsanleitung
Barco
Barco TLD HB 1.6 Bedienungsanleitung
Barco
Barco TLD HB (0.8:1) Bedienungsanleitung
Barco
Barco R9829790 Bedienungsanleitung
Beliebte Linse Handbücher anderer Marken
Tamron
Tamron SP 70-300mm F/4-56 Di VC USD Bedienungsanleitung
FujiFilm
FujiFilm FUJINON ZA17x7.6BERD-S6 Bedienungsanleitung
Panasonic
Panasonic VW-W4907 Bedienungsanleitung
Navitar
Navitar 1-51332 Leitfaden
Leica
Leica APO-SUMMICRON-SL 1:2/50 ASPH. Bedienungsanleitung
Sony
Sony LKRL-Z200 Series Bedienungsanleitung
