Barco R9002380 Bedienungsanleitung

FLM upgrade

Installation manual

R20+ to R22+ and HD18 to HD20

R59770284/01

19/12/2008

Barco nv Media & Entertainment Division

Noordlaan 5, B-8520 Kuurne

Phone: +32 56.36.89.70

Fax: +32 56.36.883.86

E-mail: [email protected]

Visit us at the web: www.barco.com

Barco Inc. Media and Entertainment Division

11101 Trade Center Drive, Rancho Cordova, California 95670, USA

Phone: +1 916 859-2500

Fax: +1 916 859-2515

E-mail: [email protected]

Visit us at the web: www.barco.com

Printed in Belgium

1. FLM upgrade R20+→R22+ / HD18→HD20

1. FLM UPGRADE R20+→R22+ / HD18→HD20

About this upgrade kit

The purpose of this kit is to upgrade the Barco FLM R20+ or the Barco HD18 to respective a FLM R22+ or a FLM HD20. For that

the Lamp Power Supply (LPS) and Lamp House has to be replaced and the projector software must be updated. Futhermore, the

small UV/IR ﬁlter inside the projector has to be removed. The improved coating on the UV blocker of the new Lamp House makes

this small UV/IR blocker unnecessary. This kit contains the Lamp Power Supply, the Lamp House and either an “FLM R22+” label

or an “FLM HD20” label which has to replace the existing label on the projector once the upgrade is realized.

The projector software (version 1.7.18 or later) for the FLM R22+ or the FLM HD20 projector must be downloaded from the Barco

web site www.barco.com. Note that a software key is required to activate the FLM R22+ or HD20 projector software. This software

key has to be requested by the customer from Barco. This manual includes the procedure how to do so.

The Projector Toolset which is required to update the projector software must be version 1.5.0 or later and can also be downloaded

from the Barco web site www.barco.com.

Order no. Description

R9854546 FLM upgrade HD18 →HD20

R9854548 FLM upgrade R20+ →R22+

Thanks to this update kit, you will be able to achieve a 10% increase of the light output of the Barco FLM R20+ or the Barco HD18

and you can beneﬁt from an extra year of warranty. The foregoing statements are subject to a strict adherence to the conditions and

procedures set forth herein and are limited to the Barco FLM R20+ or the Barco HD18. See chapter "Terms and conditions", page

12.

Please read to manual and contact your local Barco sales desk prior to starting the update should any part thereof be unclear,

incorrect, confusing or subject to interpretation.

Overview

• FLM upgrade process

• Removing the small UV/IR blocker

• Cleaning the cold mirror

• Making a new conﬁguration

• Updating the projector software

• Activating projector functionality

• Terms and conditions

R59770284 FLM UPGRADE 19/12/2008 1

1. FLM upgrade R20+→R22+ / HD18→HD20

1.1 FLM upgrade process

This process describes the different stages to upgrade the FLM projector. Note that some stages refer to other

documents included in the upgrade kit. Other stage refer to procedures included in this document.

WARNING:This procedure may only be performed by qualiﬁed technical service personnel.

Process stages:

1. Remove the old Lamp House from the FLM projector. See detailed instructions in the installation manual “Lamp House replace-

ment” (R5976299) included in this upgrade kit.

2. Remove the small UV/IR blocker. For detailed instructions see "Removing the small UV/IR blocker", page 3 .

Caution: Do not touch the cold mirror while removing the small UV/IR blocker.

3. Clean the cold mirror. See procedure page 4 .

4. Install the new Lamp House in the FLM projector. See detailed instructions in the installation manual “Lamp House replacement”

(R5976299) included in this upgrade kit.

5. Replace the Lamp Power Supply of the FLM projector. See detailed instructions in the installation manual “FLM Lamp Power

Supply” (R59770060) included in this upgrade kit.

6. Replace the product label on the projector cover with the new label included in this upgrade kit.

Tip: To remove the old label easily warm up the label using a hair drier.

7. Make a projector conﬁguration in the Projector Toolset. See pagepage 5 or consult the user guide of the “Projector Toolset for

FLM”

8. Upgrade the projector ﬂash software with version 1.7.18 or later. For detailed instructions see chapter "Updating the projector

software", page 7 or consult the user guide of the “Projector Toolset for FLM”. The projector ﬂash software, Projector Toolset

and user guides can be downloaded from the secured Barco web site https://my.barco.com via the following links:

FLM R20+: https://my.barco.com/en/products/product_support.asp?GenNr=1647

FLM HD18: https://my.barco.com/en/products/product_support.asp?GenNr=1697

9. Request a software key from Barco to activate the new projector software. See procedure "Activating projector functionality",

page 9 .

2R59770284 FLM UPGRADE 19/12/2008

1. FLM upgrade R20+→R22+ / HD18→HD20

1.2 Removing the small UV/IR blocker

Some UV/IR blockers have a circular shape. The illustrations in this procedure are for a square shaped UV/IR

blocker. Nevertheless, the same procedure remains valid for both type of UV/IR blockers.

Location of the small UV/IR blocker

The small UV/IR blocker (reference 1) is located in the light path between the cold mirror and the integration rod. Remove the Lamp

House to access the small UV/IR blocker.

Image 1-1

This procedure assumes that the lamp house is already removed from the projector.

Necessary tools

2,5 mm Allen wrench.

How to remove the small UV/IR blocker?

1. Remove the metal frame of the small UV/IR blocker by turning out the four screws (reference 1) as illustrated.

Caution: Do not touch the surface of the cold mirror.

Image 1-2

2. Remove out the UV/IR blocker (reference 2 of image 1-2) from its holder.

For optimal performance clean the cold mirror now while it is accessible. See procedure "Cleaning the cold

mirror", page 4 .

R59770284 FLM UPGRADE 19/12/2008 3

1. FLM upgrade R20+→R22+ / HD18→HD20

1.3 Cleaning the cold mirror

When cleaning the cold mirror?

Only clean the cold mirror in case it is really necessary. This means in case dust is clearly visible upon the surface of the cold mirror.

This procedure requires that the lamp house is removed from the projector.

WARNING:ISOPROPANOL ALCOHOL (200–661–7).

Hazardous product. Irritating to eyes and skin. Always use in a well ventilated area. Vapors may cause drowsi-

ness and dizziness. Avoid contact with skin and eyes. In case of contact with the eyes, rinse immediately with

plenty of water and seek medical advise.

CAUTION:ISOPROPANOL ALCOHOL (200–661–7).

Hazardous product. Lightly ﬂammable. Always use in a well ventilated area. Keep away from sources of

ignitions. Do not smoke while working with isopropanol. Exclusive keep in original container tightly closed

at a cool, well ventilated and ﬁreproof storage space.

Necessary tools

• Clean Torayse cloth.

• Clean cotton cloth.

• Demineralized water.

• Isopropanol alcohol.

Howtocleanthecoldmirror?

1. Wipe off the dust of cold mirror. Use for that a clean Torayse cloth.

Tip: Limit the number of wipe movements. This to protect the optical coating. It is better to wipe of the dust with one good

wipe movement then with 10 soft wipe movements.

2. Is all dust removed from the cold mirror?

If yes, stop this cleaning procedure.

If no, wipe off the dust of the cold mirror with a clean cotton cloth and demineralized water.

Tip: Use isopropanol alcohol instead of demineralized water to remove ﬁngerprints.

4R59770284 FLM UPGRADE 19/12/2008

1. FLM upgrade R20+→R22+ / HD18→HD20

1.4 Making a new conﬁguration

Necessary tools

Latest version of the Projector Toolset.

Howtomakeanewprojectorconﬁguration via an IP address?

1. Startup the Projector Toolset. Make sure that you have the latest version of the Projector Toolset installed.

2. Create a new projector conﬁguration via the menu Conﬁguration > Add > Large venue > Barco FLM.Asaresultthe“Create

device” window pops up.

Image 1-3

3. Click on the “Connection” button (reference 1 image 1-4) in the “Create device” window. As a result the window is adapted for

the properties regarding the connections.

Image 1-4

4. Activate “A device connected on the network” and click on the “Device scan” button (reference 2 image 1-5). Make sure that

the projector is operational and that the projector is connected with the same network of the PC running the Projector Toolset.

(Ethernet connections via an UTP cable).

5. Select the projector (reference 3 image 1-5) out of the list with discovered devices. As a result the IP address (reference 4

image 1-6) is ﬁlled in automatically.

Image 1-5

R59770284 FLM UPGRADE 19/12/2008 5

1. FLM upgrade R20+→R22+ / HD18→HD20

6. Click on the “Ok” button (reference 5 image 1-6) of the “Create device” window. As a result a new projector conﬁguration is

added.

Image 1-6

Refer to the user guide of the Projector Toolset for more detailed instructions and other functionality of the

Projector Toolset.

6R59770284 FLM UPGRADE 19/12/2008

1. FLM upgrade R20+→R22+ / HD18→HD20

1.5 Updating the projector software

Necessary tools

• Latest version of the projector ﬂash software (update package).

• Latest version of the Projector Toolset.

How to update the projector software?

1. Download the latest projector ﬂash software (update package) from the secured Barco web site https://My.Barco.com and copy

the zipped ﬁle in the update package folder of the Projector Toolset: C:\Program Files\Barco\ProjectorToolset.

Note: Take into account that the folder “C:\Program Files\Barco\ProjectorToolset” is the default update package folder when

installing the Projector Toolset.

2. Start up the Projector Toolset and activate the “Software update” module by clicking on the software update icon (reference 1

image 1-7) in the tool bar of the Projector Toolset. As a result the tab pages “Update settings” and “Version information” become

available.

3. Click on the “Update new ...” button (reference 2 image 1-7. As a result the Projector Toolset start scanning the update package

folder for update packages of the selected conﬁguration (e.g. Barco FLM). If no packages where found a pop up message “No

packages found. Please check the update package folder.” is displayed. If packages where found a window opens with a list of

found packages.

Image 1-7

4. Does the Projector Toolset display a pop up message “No packages found. Please check the update package folder.”?

If yes, click on the “Ok” button (reference 3 image 1-7) of the message. A new browse window opens wherein you can select

(reference 4 image 1-8) the folder which contains the update package. As a result a window opens with a list of found packages.

If no, proceed with the next step.

5. Select the update package (reference 5 image 1-8) from the list and click on the “Next” button (reference 6 image 1-8). As a

result a new window opens with a list of ﬁles to install.

R59770284 FLM UPGRADE 19/12/2008 7

1. FLM upgrade R20+→R22+ / HD18→HD20

Image 1-8

6. Click on the “Install this stage” button (reference 7 image 1-9) to install the selected software ﬁles. Note that by default all software

ﬁles are selected which installed version is less recent then the version in the update package.

7. Repeat step 6 for each stage. Use the “Next stage” button and the “Previous stage” button (reference 8 image 1-9) to navigate

through the available stages.

8. Click on the “Close” button (reference 9 image 1-9) once all software ﬁles are updated.

Image 1-9

8R59770284 FLM UPGRADE 19/12/2008

Andere Handbücher für R9002380

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Barco Projektor Handbücher

Barco

Barco SP2K-S Bedienungsanleitung

Barco

Barco PJWU-101B Bedienungsanleitung

Barco

Barco OL-521 Handbuch

Barco

Barco HDQ series Bedienungs- und Wartungsanleitung

Barco

Barco R9001250 Bedienungsanleitung

Barco

Barco BarcoGraphics Maxwell/ 6300 Bedienungsanleitung

Barco

Barco RETRO DATA 2100LC Bedienungsanleitung

Barco

Barco HDX series Betriebsanleitung

Barco

Barco R9001390 Bedienungsanleitung

Barco

Barco BarcoReality SIM 6 Ultra II Bedienungsanleitung

Barco

Barco R9002400 Bedienungsanleitung

Barco

Barco ClickShare CS-100 Bedienungsanleitung

Barco

Barco FS33 IR WUXGA Bedienungsanleitung

Barco

Barco UDM Series Bedienungsanleitung

Barco

Barco Athena Bedienungsanleitung

Barco

Barco R9002250 Bedienungsanleitung

Barco

Barco RLM G5 Performer Bedienungsanleitung

Barco

Barco R9010300 Bedienungsanleitung

Barco

Barco DP-1500 Bedienungsanleitung

Barco

Barco iQ PRO G500 Bedienungsanleitung

Barco

Barco R9898170 Bedienungsanleitung

Barco

Barco CNWU-61B Bedienungsanleitung

Barco

Barco BarcoGraphics Maxwell/ 6300 Bedienungsanleitung

Barco

Barco UDX Series Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung