barfield TT-1000A Bedienerhandbuch
TT-1000A TURBINE TEMPERATURE TEST
SET
USER INSTRUCTION MANUAL
M/N: TT-1000A
P/N:101-00901
Doc. P/N: 56-101-00901
Revision D
April 24, 2013
__________________________________
BARFIELD, INC.
Corporate Headquarters
4101 Northwest 29thStreet
Miami, Florida 33142
www.barfieldinc.com
Email: [email protected]
http://www.avionteq.com/Barfield-TT1000A-Turbine-Temperature-Test-Set-PN-101-00901.aspx
www.avionteq.com
To buy, sell, rent or trade-in this product please click on the link below:
56-101-00901-D Page ii
CONTACT INFORMATION
Users are requested to notify the manufacturer of any discrepancy, omission, or error found in
this manual. Inquiries should include specific questions and reference the publication title,
number, chapter, page, figure, paragraph, and effective date.
Please send comments to:
TECHNICAL CUSTOMER SUPPORT - GSTE
BARFIELD, INC.
4101 NW 27th Street
MIAMI, FL 33142
USA
Telephone (305) 894-5400
(800) 321-1039
Fax (305) 894-5401
DISCLAIMER
BARFIELD INC., neither a vendor nor supplier of Turbine Temperature Systems or an airframe
manufacturer, has no control over calibration figures or procedures. A variant between actual and
those recommended may exist, however, information presented is correct to the best of our
knowledge at the time of publication and is presented for reference only.
56-101-00901-D Page iii
ATTENTION
Although every effort has been made to provide the end user of this equipment with the most
current and accurate information, it may be necessary to revise this manual in the future. Please
be sure to complete and return the enclosed OWNER WARRANTY REGISTRATION CARD to
Barfield in order to validate the warranty and to ensure that you will receive updated information
when published. You MUST have your name and address on file at Barfield as a registered
user of this equipment, to be able to obtain the service covered by the warranty.
Visit the company website, http://barfieldinc.com/, for publication updates.
Please send the Registration Card to:
Barfield, Inc.
4101 NW 27th Street
Miami, FL 33142
USA
56-101-00901-D Page iv
56-101-00901-D Page v
REVISION RECORD
REV. ECO # REV. DATE DESCRIPTION OF CHANGE
A N/A May 5, 1995 Initial Release
B N/A February 16, 2002 Updated to latest format. Added List of
Figures/Tables page.
C 260-00890 January 27, 2012 Updated to latest format; specifications section
changes.
D 260-00970 April 24, 2013 Added instructions for using 45vdc voltage
converter.
56-101-00901-D Page vi
MAINTENANCE AND REPAIR INFORMATION
The manufacturer of this equipment does not recommend the user to attempt any maintenance
or repair. In case of malfunction, contact the manufacturer, to obtain the list of approved repair
facilities worldwide, ensuring that this equipment will be serviced using proper procedures and
certified instruments. A Return Maintenance Authorization (RMA) number will be assigned
during this call, to keep track of the shipment and the service.
BARFIELD PRODUCT SUPPORT
DIVISION
Mailing / Shipping Address:
Telephone (305) 894-5400
(800) 321-1039
Fax (305) 894-5401
Barfield, Inc.
4101 NW 29th Street
Miami, Florida 33142
USA
56-101-00901-D Page vii
TABLE OF CONTENTS
Contact Information
Attention
Warranty Information
Revision Record
Maintenance and Repair Information
Table of Contents
Page
DESCRIPTION
Purpose of Manual...........................................................................................................................1
General Description.........................................................................................................................1
Switching Functions.........................................................................................................................2
OPERATION
General Operating Instructions ...................................................................................................... 4
System Lead Resistance Test Procedure ..................................................................................... 7
Thermocouple Resistance Test Procedure................................................................................... 8
Insulation Testing Procedure.......................................................................................................... 9
Indicator Test Procedure.............................................................................................................. 10
Potentiometer or Servo type Indicator Test Procedure ............................................................... 12
Temperature Measurement Test Procedure ................................................................................14
SPECIFICATIONS AND CAPABILITIES
Physical Data ............................................................................................................................... 15
Specification .................................................................................................................................15
Capabilities .................................................................................................................................. 16
Recertification .............................................................................................................................. 18
SHIPPING
Receiving .....................................................................................................................................19
Shipping ......................................................................................................................................19
STORAGE
Procedure .....................................................................................................................................19
56-101-00901-D Page viii
LIST OF FIGURES AND TABLES
SECTION FIGURE / TABLE TITLE PAGE
1-1 1 TT-1000A FRONT PANEL LAYOUT 3
1-1 2 VOLTAGE CONVERSION 5
1-2 1 16ΩINDICATOR TEST CONVERSION TABLE 11
1-3 2 THERMOCOUPLE LINEARIZATION TABLE 17
1-3 3 REFERENCE JUNCTION COMPENSATION TABLE 18
1-3 4 ERROR TABLE 18
56-101-00901-D Page 1 of 19
DESCRIPTION
1. PURPOSE OF MANUAL
A. This publication contains the description, operating procedures for the:
TT-1000A DIGITAL TURBINE TEMPERATURE TEST SET, P/N 101-00901
(Refer to Figure 1.)
Manufactured by:
Barfield Inc.
B. This manual is released to address the TT-1000A which is designed to test and
calibrate Chromel-Alumel (CH-AL) temperature indicating systems.
2. GENERAL DESCRIPTION
The TT-1000A provides the means for quickly troubleshooting aircraft temperature
indicating systems. It has sufficient sensitivity and accuracy to test thermocouple and
system resistance, insulation, and indicator calibration. It features portability, simplicity
of operation, direct reading, and multi-functional versatility.
A. TT-1000A Features;
(1) Specifically designed to meet all requirements for testing aircraft
Chromel-Alumel (CH-AL) temperature measuring systems and provides an
accurate display of thermocouple outputs in degrees Celsius (oC).
(2) Thermocouple and lead resistance measurements to 0.01 Ωand insulation
measurements up to 2 MΩ.
(3) Simulates thermocouple outputs and system lead resistances from 0 to 25 Ω.
(4) Completely self-contained, self-monitoring, easily portable temperature and
resistance measuring and simulating device for all CH-AL systems with the
capability to bench test indicators.
(5) Human engineered for maximum ease of operation and maintenance with
state of the art low battery drain circuitry with automatic ambient test point
temperature correction.
(6) A large, 0.35 in. (9mm) high characters, 3 1/2 digit Liquid Crystal Display (LCD)
with preprogrammed legends.
56-101-00901-D Page 2 of 19
(7) Carrying Case features;
(a)Fabricated from drawn aluminum for maximum strength.
(b)The lid has been fitted with a bracket which, when the lid is closed,
contacts the "ON/OFF" switch, in the "ON" position and moves it to the
"OFF" position.
(c)Provides, on the right hand side, space for test lead storage.
(d)The lid also contains a placard presenting abridged operating instructions
for the experienced technician.
NOTE
:For personnel without experience, it is advisable to become familiar
with this publication, the TT-1000A, and the equipment with
which it is to be used BEFORE performing any test or checks.
3. SWITCHING FUNCTIONS (Refer to Figure. 1)
A. The "ON/OFF" switch (1) applies power for all functions.
B. The "TEMP. ADJ." control knob (3), a ten turn potentiometer permits exact
adjustment of the millivoltage generator for temperatures which are displayed on
the LCD (2) as oC when the "FUNCTION" switch (4) is in the "INDICATOR TEST"
position.
C. The "FUNCTION" switch, a three position rotary switch that permits selection of the
three principal test functions, "RESISTANCE MEASURE", "INDICATOR TEST"
and "TEMP. MEASURE".
D. The "PUSH TO MEASURE ACFT. LEAD RES." BLACK pushbutton (5), when
depressed with test leads connected to aircraft system and "FUNCTION" switch in
"RESISTANCE MEASURE" position produces a display of the resistance in the
system.
E. The "SHORT TEST LEADS AND PUSH TO SET SYSTEM RES." RED pushbutton
(6), when depressed with test leads shorted and the "FUNCTION" switch in the
"RESISTANCE MEASURE" position connects the "SYSTEM RES." potentiometer
for system resistance adjustment.
F. The "RESISTANCE RANGE" switch (7), a four position rotary switch, permits
selection of the resistance range, 20 Ω, 200 Ωor 2 MΩ- (0 Ωsystem resistance)
and "BAT" position for monitoring the 45-volt battery.
Andere Handbücher für TT-1000A
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere barfield Prüfgeräte Handbücher
barfield
barfield DFQ40K Bedienerhandbuch
barfield
barfield DPS1000 Bedienerhandbuch
barfield
barfield DPS1000 Bedienerhandbuch
barfield
barfield 1811NG Bedienerhandbuch
barfield
barfield 1811D Series Bedienerhandbuch
barfield
barfield 2548H Betriebsanleitung
barfield
barfield DPS400 Bedienungsanleitung
barfield
barfield 2311FA Bedienerhandbuch
barfield
barfield 1811G Bedienerhandbuch
barfield
barfield DPS1000 Bedienerhandbuch
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung