Barton Moretti Bedienungsanleitung
User Manual
OWNERS MANUAL FOR BARTON HYPER
MOPED
INTRODUCTION
We are pleased to welcome you among the buyers of Barton Motors' two-wheeled
vehicles.
Thank you for purchasing our vehicle and at the same time we are convinced that you
have made the right choice. Have a nice ride!
This manual contains advices on maintenance and handling as well as advice necessary
for safe driving. We recommend that you read this manual carefully before starting to
ride. Proper operation and maintenance will ensure safe driving, minimize the hassles
associated with vehicle operation, and keep your engine in good shape for a long time.
Before starting to drive, please read the contents of the User's Manual carefully in
order to learn about the construction of the vehicle and the rules of its use and
maintenance. Taking care of the technical condition of the vehicle and your own safety
will allow you to enjoy the purchased two-wheeled vehicle for a long time.
TABLE OF CONTENTS
Road Safety 1
Vehicle construction ………………………………………….………………………………………………...…………..…….2
Operation and function of vehicle components 4
1. Ignition 4
2. Switch assembly on the left side of the steering wheel 5
3. Switch assembly on the right side of the steering wheel 6
4. Meter 6
5. Brakes 7
6. Brake fluids 8
7. Tires 8
8. Fuse 9
9. Battery 9
10. Fuel tank 10
11. Air filter 10
Pre-trip inspection 12
Driving technique 13
Running-in 17
Periodic inspection 18
Periodic checks schedule 19
Methods of environmental protection and fuel economy 20
Technical vehicle data 23
ROAD SAFETY
●Obey all traffic signs and regulations..
●Adjust your speed to the road conditions.
●Check the technical condition of your vehicle regularly.
●Wear weather-appropriate moped clothing that gives you good visibility on
the road
●Learning to drive should take place in facilities that allow you to obtain a
Driving Licence; mastering the technique and method of driving is the basis of
preparation for using a vehicle on the road.
●Most injuries in motorcycle accidents are head injuries, so be sure to drive
with an approved safety helmet.
●Avoid sudden braking and turning. This can cause you to slip and fall.
●Be careful especially in rain. The road surface is different in rain than in sunny
weather, which increases the vehicle's braking distance. In this case, reduce
your speed and brake in good time before the obstacle
●When driving with the lift, the accelerator knob should be set to the initial
position and a low speed should be maintained by intermittent braking.
VEHICLE CONSTRUCTION
Rys. 1
VEHICLE CONSTRUCTION
Rysunek 1.
1. Rear indicators
2. Silencer
3. Fuel tank with filling unit
4. Front brake lever
5. Headlamp
6. Meter
7. Rear brake lever
8. Front indicators
9. Front shock absorber
10. Foot lever for rear brake
OPERATION AND FUNCTION OF VEHICLE COMPONENTS
1. Ignition
Turning the key turns the ignition on and off.
Warning: do not use the key while driving!
Advice: when the engine is not running, turn the key to the OFF position - this prevents
depletion or damage to the battery.
Operating principle:
●Turning the key to the ON position starts the engine and automatically activates the
low beam headlights.
●Turning the key to the OFF position turns off the engine, turns off the low beam. The
key can now be removed from the ignition.
Steering wheel lock
Always lock the steering wheel when parking your moped for safety.
●Turn the steering wheel to the left
●Press in the key and turn it from OFF to LOCK position
●Pull out the key
Unlocking the steering wheel
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Barton Motorrad Handbücher
Beliebte Motorrad Handbücher anderer Marken
MOTO GUZZI
MOTO GUZZI QUOTA 1100 ES Bedienungsanleitung
APRILIA
APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung
Yamaha
Yamaha 2006 YZF-R1V Bedienungsanleitung
KTM
KTM Freeride E-XC 2021 Bedienungsanleitung
Fantic
Fantic Enduro 125 Bedienungsanleitung
Ducati
Ducati Supersport 750 desmodue Bedienungsanleitung
