Barton 99809 Original Bedienungsanleitung

AUTOMATIC WASHER

SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,

OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S

SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH

AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).

OWNER’S MANUAL AND SAFETY INSTRUCTIONS

ITEM: 99809

FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628-0880 MON-FRI 9AM TO 3PM PST

IMPORTANT SAFETY INFORMATION

GENERAL SAFETY WARNINGS

Read all safety warnings and instructions. Failure to follow the warnings and instructions

may result in electric re and/or serious injury. Save all warnings and instructions for future

reference.

SAFETY

The warnings, precautions, and instructions discussed in this instruction manual cannot cover

all possible conditions and situations that may occur. It must be understood by the operator that

common sense and caution are factors which cannot be built into this product, but must be supplied

by the operator. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS

before operating. Failure to follow the safety rules and other basic safety precautions may result in

serious personal injury.

Read and understand all instructions. Failure to follow all instructions may result in serious injury or

property damage.

DO NOT allow persons to operate or assemble the product until they have read this manual and have

developed a thorough understanding of how it works.

DO NOT modify this product in any way. Unauthorized modication may impair the function and/or

safety and could affect the life of the product. There are specic applications for which the product was

designed.

This appliance is for household use only. It is not intended for commercial, Maritime or RV applications.

The appliance is intended for indoor use only. DO NOT use outdoors.

Use only detergents or softeners recommended for use in this manual and keep them out of the reach

of children.

DO NOT unplug your appliance by pulling on its power cord. ALWAYS grasp the plug rmly and pull it

straight out from the outlet.

DO NOT operate any appliance that has a damaged cord or plug, if it is damaged or malfunctions in any

way, or if the outlet is not in proper working order. Contact customer service or a service technician.

ALWAYS turn off and unplug from outlet before servicing, changing accessories or cleaning the unit.

Allow unit to cool down completely before cleaning, moving or servicing. Turning the unit off does not

disconnect it from the power source.

DO NOT put anything ammable or explosive in, on, or near the appliance. DO NOT wash articles of

clothing or items that have been soaked in ammable or explosive chemicals.

ALWAYS wait for the washer tub to completely stop moving before reaching in to add or remove any

clothes.

DO NOT wash clothes that have been previously exposed to gasoline, solvents or other ammable

substances.

DO NOT operate this washer unless all enclosure panels are properly installed.

DO NOT tamper with or modify the controls.

IMPORTANT SAFETY INFORMATION

WARNING: Risk of child entrapment. DO NOT allow children to play on or in the appliance. Close

supervision of children is necessary when the appliance is used around them.

The appliance must be plugged into a properly installed and grounded outlet that meets the voltage

requirements listed on the ratings label.

CAUTION: The power cord is equipped with a 3-prong grounding plug to protect against shock hazards.

ALWAYS plug the cord into a properly installed and grounded 3-prong wall receptacle, and DO NOT

remove the grounding prong.

Keep the fuel supply hose away from any heated surfaces.

Under certain conditions, hydrogen gas may be produced in a household hot water system that has not

been used for two weeks or more. Hydrogen gas is highly explosive. If the hot water system has not been

used for more than two weeks, turn on all hot water faucets and let the water ow for several minutes

prior to using your compact washer.

DO NOT modify or repair the unit by yourself. Contact customer service or a qualied service technician if

service is required.

To reduce the risk of electric shock or re, DO NOT use an extension cord or outlet adapters to connect

the unit to an electrical power source. The appliance must be properly grounded using a three-prong

electric receptacle wall outlet.

DO NOT install the washing machine in a moist or wet area, or where it can get wet. DO NOT spray with

water when cleaning.

DO NOT put children on top of, or allow children to climb in or on, the washer.

Regularly clean the power plug to remove dust and dirt, in order to prevent electrical failure.

It is recommended to unplug the unit when it is not in use.

ALWAYS be sure to properly and securely connect the power cord to the outlet, and the water hoses to

prevent leakage or electrical shock.

DO NOT operate the unit or handle the plug with wet hands.

DO NOT ground the appliance to a gas pipe, plastic water pipe or telephone line. Improper grounding

may lead too electric shock.

DO NOT wash raincoats, heavy jackets, or similar, heavy items.

DO NOT put heavy or hot items on top of the machine.

DO NOT wash laundry soaked with petrol and organic solvent.

DO NOT share on power source with other appliances. DO NOT use an unappointed power source.

Keep the plug strip clean.

DO NOT place the machine in the bathroom. Such action may damage the electrical insulation and

cause the body to rust.

Plug the power cord into an AC 120V/60Hz wall socket rated at 15 AMPS or higher. Use the socket for

this appliance only. DO NOT use an extension cord.

DO NOT use an electric transformer. It could result in electric shock or re.

Remove all foreign substances such as dust or water from the power plug terminals and contact points

using a dry cloth on a regular basis.

PARTS DIAGRAM AND LIST

SAVE THESE WARNINGS

DO NOT hook the power cord over a metal object, place a heavy object on the power cord, insert the

power cord between object or push the power cord into the space behind the appliance. This may result

in electric shock or a re.

DO NOT pull or excessively bend the cord on this appliance. Unplug by pulling on the plug itself.

Make sure the socket you use is grounded in accordance with local and national codes.

DO NOT install this appliance near a heater or other ammable material.

DO NOT install on carpet. Install only on a level and solid oor that can support its weight.

This washer is heavy, installation is a two-person job.

Store and install the washer where it will not be exposed to below freezing temperatures, or extreme

weather conditions.

If the appliance is ooded, cut the power immediately and contact your nearest service center.

If the appliance emits a strange noise, a burning smell or smoke. unplug the power plug immediately and

contact your nearest service center. Failing to do this may result in electric shock or re.

In the event of a gas leak, ventilate the area immediately. DO NOT turn any appliance or light on or off.

DO NOT use a ventilating fan, a spark may result in re or explosion.

DO NOT force the washer lid open while the washer lid is open. Water owing out of the washer may

cause burns or spill on the oor. Forcing the lid open may cause damage to the product.

Make sure to remove the packaging (sponge, Styrofoam) attached to the bottom of the machine before

using it.

DO NOT mix chlorine bleach with ammonia or acids such as vinegar. This can produce poisonous gas,

resulting in serious injuries.

If any foreign substance such as water enters the appliance in any area other than the tub, unplug the

appliance and contact your nearest service center.

DO NOT reach into the washer parts are moving. Before loading, unloading or adding items, press the

START/PAUSE button and allow the basket to come to a complete stop before reaching inside. Failing to

do so may cause serious injury.

Open the faucet slowly after a long period of non-use. The air pressure in the water supply hose or the

water pipe may result in damage to a part in water leakage.

Ensure that the water inlet pipe is connected and the tap is opened before washing clothes.

DO NOT use regular hand washing soap in the washer. It can harden over time and cause problems for

the washer.

DO NOT wash comforters rugs or doormats. These items are too heavy for the washer and may cause

abnormal vibrations within the washer.

INSTALLATION and PARTS

UNPACKING AND REMOVING THE SHIPPING MATERIAL:

Remove the packing box and lift the washer up and away from the Styrofoam base cushion. Open the lid of

the washer to take out all accessories including the protective foam.

Packaging materials can be

dangerous to children; keep

all packing material well out

of the reach of children.

DO NOT operate the washer

on the foam base cushion.

Failing to do so will result in

serious vibration.

PARTS DIAGRAM

INSTALLATION INSTALLATION

ACCESSORIES

TOOLS NEEDED FOR INSTALLATION

KEY DIMENSIONS AND SPECIFICATIONS

CHOOSING THE PROPER LOCATION

FLOORING: For the best performance, you must install your washer on a solidly constructed oor. Wood

oors may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting and soft

tile surfaces are contributing factors to vibration which can cause your washer to move slightly during the spin

cycle.

DO NOT install your washer in areas where water may freeze. Since your washer retains some water in

its water valve, pump and hose areas. Frozen water can damage the belts, pump and other components.

NEVER install on a platform or weakly supported structure.

ELECTRIC

Use 120V/60Hz 15 AMPS fuse or circuit breaker. Individual branch circuit serving only for your washer is

recommended. NEVER use an extension cord with this appliance.

GROUNDING: Electrical grounding is required for this washer. In the event of a malfunction, grounding

will reduce the risk of electric shock by providing a path of least resistance for the electric current. This

appliance is equipped with a power cord having a three-prong grounding plug for use in a properly installed

and grounded outlet. The plug MUST be plugged into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

NEVER connect the ground wire to plastic plumbing lines, gas lines or hot water pipes.

DIMENSIONS: 400X430X720mm

PACKING SIZE: 505X515X780mm

INSTALLATION

WATER

To correctly ll your washer in the proper amount of time. Water pressure of 14 to 70PSI (100 to 500 kPa) is

required. Water pressure less than 14psi may cause water valve failure, or may not allow the water valve to

shot off completely or can extend the ll time beyond what your washer controls allow, causing your washer

to turn off and alarm error. A time limit is built into the controls to prevent ooding in your home if a hose

becomes loose. The water faucet must be within 4 feet (122cm) of the back of your washer. To avoid the

possibility of water damage, have the water faucets easily accessible. Turn off faucets when washer is not

in use. Periodically check that there is no leakage from the water inlet ttings.

DRAIN FACILITY: The recommended height of the standpipe is 35” or 90cm. The drain hose must be

routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the

outside diameter of the drain hose.

INSTALLING THE WASHER

STEP 1. Tilt the unit back onto its rear rollers and push it forward as shown. Move the unit to a location as

described in the previous location section. Make sure the surface is level and without carpeting.

STEP 2. Slide the bottom cover into the slots on the bottom surface of the unit as in the following gure and

x it with two screws attached with the unit.

INSTALLATION INSTALLATION

STEP 1. The quick connection adaptor is primarily for quick connection to a single faucet, such as a kitchen

sink. Skip this step if you are connecting the washer to a sink with separate hot and cold faucets the adaptor

consists of two parts that quickly connect or disconnect. One part, the faucet tting, is for connection to the

faucet and the other part, the hose tting, connects to the cold water hose of the washer.

Pull back on the white ring to free the faucet tting from the adaptor for installation into the faucet.

Screw the end of the cold water hose onto the base of the hose tting.

If the faucet has internal screw threads, unscrew the aerator if present from the tip of the faucet. Then

screw the faucet tting into the faucet. Make sure the black rubber gasket is on top of the adaptor before

screwing it in.

If the faucet has external screw threads, remove the gasket from the top of the faucet tting and screw

the tting over the external threads.

Pull back on the white ring to connect the two parts of the adaptor back together.

NOTE: When connected to a single faucet that can dispense either hot or cold water, both hot and cold

water can be run through the cold water line for washing use. However, it is recommended to only run cold

water washes when the adaptor is connected to such a faucet.

STEP 2. Connect the ends of the water supply hoses to the HOT and COLD faucets. For convenience, use

the quick connection adaptor for connection to the cold water faucet.

STEP 3. Tighten the ttings by hand until they are snug, then tighten them an additional 2/3 of a turn with a

wrench.

When you fasten the ttings, do not fasten them too tightly or apply tape or sealant to the faucets or water

supply intakes. This can damage the ttings. After you have connected the water supply hoses to the

faucets, ensure that they are connected securely by pulling the water supply hoses downwards.

STEP 4. Place the unconnected ends of the hoses into a bucket and open the faucets

connected to the two water supply hoses for 10-15 seconds to remove any foreign

substances from the hoses. Close the faucets before continuing.

STEP 5. Connect the ends of the water supply hoses to the water supply intake connections at the back of

the washer.

The water supply hose connected to the HOT faucet

must be connected to the hot water supply intake and

the water supply connected to the COLD faucet must

be connected to the cold water supply intake.

INSTALLATION

Conrm that the water supply hoses are not twisted or bent. If the hoses are twisted or bent, the hoses can

leak and cause electric shock due to the water leakage. To ensure the correct water usage, connect both the

HOT and COLD water faucets. If wither or both are not connected, an error code can occur. If you do not want

to use the HOT water supply hose, install the water intake cap into the HOT water supply intake hole. In this

case, you must select cold water as the wash temperature option.

STEP 6. Tighten the ttings by hand until they are snug, then tighten them an additional 2/3 of a turn with a

wrench.

STEP 7. Turn on the HOT and COLD water supplies and check all the water supply intake connections and

the faucets for water leaks.

CONNECT THE DRAIN HOSE

Position the other end of the drain hose. It can be positioned in three

ways.

A. Over the edge of the basin. Secure the guide to the side of the

basin wall with a hook or to the tap with a piece of string to prevent the

drain hose from moving.

B. In a standpipe. The standpipe must be no shorter than 32” and no

longer than 39”.

C. In a laundry tub, The laundry tub must be no shorter than 32” and

no higher than 39”.

NOTE: Make sure the connection between the drain hose and the

wash basin, standpipe or laundry tub is not airtight.

LEVELLING YOUR WASHER

1. Slide the washer into position, then open the lid of the washer and

pour the water into the tub to just below the pulsator level.

2. If the washer is level, the pulsator is positioned at the center of the

washer as shown. If not, level your washer by turning the front leveling

feet clockwise or counter-clockwise as necessary.

OPERATION OPERATION

POWERING YOUR WASHER

1. Plug the power cord into a 3-prong, well grounded 120V/60Hz approved outlet protected by a 15 AMP fuse

or comparable circuit breaker

RUNNING A TEST CYCLE

1. Load about 6lbs of laundry into the tub. Then press the POWER button to turn on your washer.

2. Press the POWER button to turn on your washer.

3. Select the RINSE + SPIN cycle by pressing the FUNCTION to turn ON the RINSE and SPIN lights.

4. Press the START/PAUSE button to start the test cycle.

5. The washer should not rock or vibrate excessively when the water is supplied or when washing or spinning

and should drain well during the spin cycle.

If water leaks while water is being supplied or drained, check the water connections, If the washer rocks and

vibrates excessively, level your washer again.

STORING YOUR WASHER

If you want to store your washer at another location, unplug it, drain any remaining water from the drain pipe

and hook the pipe onto the back of the washer. Disconnect the water inlet hoses from the faucets and move

the washer to a new location.

CONTROL PANEL

POWER: Press the POWER button once to turn on the power of the washer. Press

again to turn off the unit.

START/PAUSE: Press the START/PAUSE button once to start the wash cycle. Press

the button during operation to pause the cycle. Press again to continue the cycle.

PROGRAM: Press this button to select the desired washing program.

Inhaltsverzeichnis

Andere Barton Waschmaschine Handbücher

Barton

Barton 99806 Original Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung