INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
-The appliance runs on BUTANE or PROPANE gas at 30 mbars.
-The appliance and gas cylinder have to be placed on a flat surface in places far from
inflammable materials.
-Protect the cylinder and the appliance from direct sunlight
-Cylinder must not be kept in the home, in an airless interior or underground
-ATTENTION: do not move the appliance when in use or when it is still warm.
-Change gas pipes that have deteriorated and replace them before the expiry date
imprinted on the pipe. Pipes must not be dented in any parts and must be installed in
such a way that they do not have to be placed under any strain. THEY MUST NOT
COME INTO CONTACT with any hot part.
-Repairs and maintenance shall be performed by skilled staff
-All changes to the appliance may be harmful.
-FOR OUTDOOR USE ONLY
The air needed for combustion is 2.0 m³/h for each kW of nominal capacity.
IF YOU SMELL GAS:
- Turn the burner off
- Close the appliance’s gas supply (cylinder tap)
- Call the gas supplier or a skilled person
- The support should not made of inflammable material and shall resist temperatures
of at least 90°C.
CONNECTION – REPLACONNECTION – REPLA
CONNECTION – REPLACONNECTION – REPLA
CONNECTION – REPLACEMENT OF GAS CYLINDERCEMENT OF GAS CYLINDER
CEMENT OF GAS CYLINDERCEMENT OF GAS CYLINDER
CEMENT OF GAS CYLINDER
Connection of the appliance to the cylinder shall be done by:
-BUTANE or PROPANE gas, minimum camping cylinder 3 Kg BUTANE
-Pressure retainer of 30 mbar BUTANE and PROPANE, with a capacity of 1.0 kg/h
minimum
-Flexible pipe in accordance with the regulations in force with a maximum length of
1.5 m
-Spray of foaming liquid to check gas leaks.
