Basler Add-on Camera Kit Bedienungsanleitung

QUICK INSTALL GUIDE

BASLER ADD-ON CAMERA KIT

dart BCON for MIPI

Basler AG

An der Strusbek 60–62

22926 Ahrensburg

Germany

All material in this publication is subject to change without notice and is

TABLE OF CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Target Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

General Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

DELIVERED COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

ADDITIONAL COMPONENTS AND SOFTWARE . . . . . . . . . . . . . . . . . . . . 10

HARDWARE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Overview of the Add-on Camera Kit Components . . . . . . . . . . . . . . . . . .12

Installing the Add-on Camera Kit Components . . . . . . . . . . . . . . . . . . . . 13

SOFTWARE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

TABLE OF CONTENTS

NEXT STEPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Developer Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Lens Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Specifications of Additional Components . . . . . . . . . . . . . . . . . . . . . . . . . .19

Power Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

DISCLAIMER AND LICENSING INFORMATION . . . . . . . . . . . . . . . . . . . . .20

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Software Licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

INTRODUCTION

About this Document

This document provides information about how to perform the hardware

installation of the Add-on Camera Kit components for a Basler dart BCON

for MIPI camera.

The document provides stepwise instructions for setting up a complete

embedded vision system and indicates where to find further information.

Note: This document describes the installation of Basler products only,

i.e., a Basler dart BCON for MIPI camera, a BCON for MIPI to Mini-SAS

adapter (referred to here as "adapter board"), and additional

accessories (see the Installing the Add-on Camera Kit Components

section).

However, to install and run a complete embedded vision system, you

also need extra components besides Basler products. These

components include a processing board and additional accessories.

Observe the relevant documentation of these components to ensure

proper installation.

INTRODUCTION

Target Audience

The Basler Add-on Camera Kit is aimed at experienced hardware and

software engineers proficient in electronics, software development, and

embedded system design.

This document is written for a target audience that has intermediate to

advanced technical skills in the areas mentioned above.

The document assumes that users have experience in the following areas:

System on Chip (SoC) or System on Module (SoM) architectures

Embedded Linux operating systems

SAFETY INSTRUCTIONS

General Safety Notices

Electric Shock Hazard: Unapproved power supplies may cause electric

shock. Serious injury or death may occur.

Only use a power supply that meets the requirements indicated in the Basler

dart Getting Started Guide included in the Add-on Camera Kit.

Fire Hazard: Unapproved power supplies may cause fire and burns.

Only use a power supply that meets the requirements indicated in the Basler

dart Getting Started Guide included in the Add-on Camera Kit.

Damage Hazard: Electrostatic discharge (ESD) can damage the

components of the Add-on Camera Kit.

Use anti-static clothes and materials, e.g., conductive shoes, anti-static

gloves, and ESD protection wrist straps to decrease the risk of

electrostatic discharge.

Control the humidity in your environment. Low humidity can cause ESD

problems.

DANGER

WARNING

NOTICE

SAFETY INSTRUCTIONS

Radio Interference Hazard: This is a Class A product that may cause radio

interference in residential environments. In this case, you are required to take

adequate preventive measures.

Observe the following items:

Do not modify the hardware components in any way. Do not remove

parts from the adapter board or solder in new parts.

Do not allow, e.g., liquid, flammable, or metallic material to get in contact

with the adapter board.

Read the documentation before using the Add-on Camera Kit.

For safety instructions related to the installation and operation of the

Basler dart BCON for MIPI camera, refer to the Basler Product

Documentation available at: docs.baslerweb.com

For safety instructions related to the installation and operation of extra

components that are not included in the Add-on Camera Kit and that

you acquire from other sources, refer to the documentation of the

corresponding manufacturers.

NOTICE

SAFETY INSTRUCTIONS

Environmental Requirements

This Add-on Camera Kit is intended for indoor use at room temperature only.

If you operate the Add-on Camera Kit at elevated temperatures or at high

load, Basler recommends providing additional cooling, e.g., by installing a

fan.

For specific environmental requirements of all the components, refer to the

following documentation:

Getting Started Guide of your camera model (in this package)

Basler Product Documentation available at docs.baslerweb.com

Corresponding documentation of the extra components

DELIVERED COMPONENTS

The Basler Add-on Camera Kit contains the following components:

Basler dart camera module, S-mount

S-mount lens

Lock ring M12x0.5

BCON for MIPI to Mini-SAS adapter ("adapter board")

Flexible flat cable

Basler dart Getting Started Guide

This Add-on Camera Kit Quick Install Guide

ADDITIONAL COMPONENTS AND SOFTWARE

In order to set up a complete embedded vision system, you also require the

following components, which are not included in the Add-on Camera Kit:

Processing board (see Note on page 11)

SD card (min. 4 GB)

Power supply

HDMI monitor (full HD resolution)

USB hub, USB keyboard, USB mouse

HDMI cable

Inhaltsverzeichnis

Andere Basler Mikrocontroller Handbücher

Basler

Basler DART BCON FOR LVDS Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung