BASSRA MACHINE TOOLS LTD.
99 Spring Road, Tyseley, Birmingham, United Kingdom, B11 3DJ
Tel: 0044 0) 121 707 4343 / Fax: 0044 0) 121 707 3535
• The owner is allowed to operate the machine onl if it is in a safe condition.
Major repairs must onl be carried out b the manufacturer or b speciall
authorised, qualified personnel.
• The operator must report and defects or alterations which affect the safet of
the machine.
• Product safet signs or decals should be periodicall inspected, cleaned or
replaced when the no longer meet the legibilit requirements for safe viewing
at a reasonable distance.
• Do not operate the machine outside the scope of its intended use. Application
outside the scope of intended use constitutes a safet hazard.
• The manufacturer will not be liable for applications outside the scope of the
machines intended use. The owner shall in such cases bear the sole
responsibilit for an resulting injuries or damage.
• Make sure the enclosures removed for maintenance work or repairs are refitted
before starting the machine.
• Do not begin an maintenance or set-up work before the machine has been
switched off and has come to a complete standstill.
• Do not open enclosures, doors or hinged covers before the machine has come
to a complete standstill. Observe all relevant safet procedures.
• Do not remove, alter or deactivate an machine parts or safet equipment.
• Onl use original BMT spare parts for our machine. We do not undertake an
liabilit for possible damage caused to the machine as a result of unauthorised
use of non-BMT parts or unauthorised changes/alterations.
• Keep the working area clean and tid . Dirt (e.g. oil or dust on the floor) and
obstacles constitute a safet hazard.
• BMT will not undertake an liabilit for injuries or damage caused b
misconduct or failure to observe these safet instructions.
• Make sure that the control voltage is switched off (Master Switch OFF) and
secured against accidental restart before installing and setting up the machine.
