Bauer HYPERMAX LITHIUM 2209C-B Bedienungsanleitung

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 22e

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

Read this material before using this

product. Failure to do so can result in

serious injury. SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 59299

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

Read all safety warnings, instructions, illustrations and specifications provided with this tool.

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

1. Output non-sinusoidal.

2. Do not obstruct ventilation openings or mount in

zero clearance compartment. Overheating may

increase the risk of fire and electric shock.

3. Do not expose to rain or use in damp locations.

4. Remove the battery before servicing.

5. Neutral floating.

6. For use with Bauer 20V Li-Ion battery

packs (sold separately).

7. Do not use inverter if it has been dropped

or impacted sharply. Use of a damaged

device increases the risk of fire.

8. Remove the battery pack from the

inverter when not in use.

9. Do not disassemble the battery inverter.

10. Keep out of the reach of children.

11. Store power inverter indoors and

out of the reach of children.

12. AC Output must be used for powering

devices of 150W or less. Connecting large

loads to the inverter can lead to damage.

13. Plugs must properly fit the outlet without

being forced. Do not insert any plug into the

inverter if it does not fit easily into place.

14. Power inverter must be kept in cool

environment. Keep away from heat.

15. Do not use power inverter near flammable

gases or fumes. Do not power medical

equipment with this power inverter.

16. Recharge only with the charger specified by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of

fire when used with another battery pack.

17. Use inverter only with specifically designated

battery packs. Use of any other battery

packs may create a risk of injury and fire.

18. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from

one terminal to another. Shorting the battery

terminals together may cause burns or a fire.

19. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

20. Do not use a battery pack or inverter that is

damaged or modified. Damaged or modified

batteries may exhibit unpredictable behavior

resulting in fire, explosion or risk of injury.

Page 3For technical questions, please call 1-888-866-5797.Item 59299

21. Do not expose a battery pack or power inverter to

fire or excessive temperature. Exposure to fire or

temperature above 140°F may cause explosion.

22. Follow all charging instructions and do not charge

the battery pack outside of the temperature range

specified in the instructions. Charging improperly or

at temperatures outside of the specified range may

damage the battery and increase the risk of fire.

23. Have servicing performed by a qualified

repair person using only identical

replacement parts. This will ensure that the

safety of the product is maintained.

24. Do not modify or attempt to repair the inverter

or the battery pack except as indicated

in the instructions for use and care.

25. The battery Charger gets hot during use.

The Charger’s heat can build up to

unsafe levels and create a fire hazard if

it does not receive adequate ventilation,

due to an electrical fault, or if it is used in a

hot environment. Do not place the Charger on a

flammable surface. Do not obstruct any vents on

the Charger. Especially avoid placing the

Charger on carpets and rugs; they are not only

flammable, but they also obstruct vents under

the Charger. Place the Charger on a stable, solid,

nonflammable surface (such as a stable metal

workbench or concrete floor) at least 1 foot away

from all flammable objects, such as drapes or walls.

Keep a fire extinguisher and a smoke detector in

the area. Frequently monitor the Charger and

Battery Pack while charging.

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE

A LARGE AMOUNT OF ENERGY AND

WILL VENT FIRE OR EXPLODE

IF MISTREATED:

a. Keep Battery Pack dry.

b. DO NOT DO ANY OF THE FOLLOWING

TO THE BATTERY PACK:

• Open,

• Drop,

• Short-circuit,

• Puncture,

• Incinerate, or

• Expose to temperatures

greater than 140°F.

c. Charge Battery Pack only according

to its Charger’s instructions.

d. Inspect Battery Pack before every use;

do not use or charge if damaged.

Symbology

VVolts

Direct Current

~Alternating Current

AAmperes

WARNING marking concerning Risk

of Eye Injury. Wear ANSI-approved

safety goggles with side shields.

Read the manual before

set-up and/or use.

WARNING marking

concerning Risk of Fire.

Do not cover Charger

ventilation ducts.

Charge on fireproof surface only.

WARNING marking concerning

Risk of Electric Shock.

Properly connect Charger’s power

cord to appropriate outlet.

WARNING marking concerning

Risk of Explosion.

Do not puncture, short, or open

battery packs and do not charge

damaged battery packs.

Page 4 For technical questions, please call 1-888-866-5797. Item 59299

Specifications

Battery Type Bauer 20V Li-Ion (sold separately)

Charger Type Bauer 20V Li-Ion (sold separately)

DC Input 20VDC, 11A

AC Output 120VAC, 60Hz, 150W

Output Wave Modified Sine Wave

USB-A Output 5VDC, 2.4A (total)

USB-C with PD Output 5VDC, 3A; 9VDC, 3A; 12VDC, 2.5A; 15VDC, 2A

Integrated LED Work Light Yes

Operation Temperature Range 14°F ~ 104°F (-10°C ~ 40°C)

Storage Temperature Range -4°F ~ 140°F (-20°C ~ 60°C)

Page 5For technical questions, please call 1-888-866-5797.Item 59299

Functions

Backlit

Inverter

Power

Button

Worklight

Button

USB-C

Port

USB-A

Ports

120VAC

Outlet

LED Work

Light

Power Button - Inverter Status

Green Normal Function

Red AC Overload

Red Blinking Overheating

Green Blinking

Recovering from

overheating. Press

Power Button to reset.

Orange Blinking Approaching Low Battery

Worklight Button

First Press On

Second Press Blinking

Third Press Off

Page 6 For technical questions, please call 1-888-866-5797. Item 59299

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this

manual including all text under subheadings therein before set up or use of this product.

General Operation

Only use with:

• Laptops, Tablets, and Cell Phones.

• Fans.

• Lights.

• Other devices of 150W or less.

1. Slide the Battery Pack onto the Inverter.

2. Connect a device to a USB Charging

Port, or the AC Outlet.

Note: If the AC output is overloaded, the power button

backlight will be red, remove the connected load

and press the power Button to restore AC output

3. Turn the Inverter ON/OFF by

pressing the Power Button.

Note: Inverter will shutdown when no

activity is detected for 3 minutes.

Note: Cooling fan will automatically turn ON and OFF

during operation. AC output will shut off if overheated.

Maintenance and Servicing Instructions

Procedures not specifically explained in this manual must

be performed only by a qualified technician.

Cleaning, Maintenance, and Lubrication

1. Li-Ion BATTERY MUST BE RECYCLED OR

DISPOSED OF PROPERLY.

Do not short, incinerate or open battery.

2. Disconnect battery pack and store battery pack,

charger, and tool in dry, indoor area out of

reach of children and away from metal objects

(i.e., paperclips, coins) to prevent shorting.

Page 7For technical questions, please call 1-888-866-5797.Item 59299

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Replacement parts not available. Refer to UPC 193175465474.

Troubleshooting

Problem Possible Causes Likely Solutions

Inverter will not turn on. 1. Battery Pack not properly

connected.

2. Battery Pack not properly

charged.

3. Battery Pack burnt-out.

1. Remove Battery Pack, make sure there are no

obstructions, reinsert the Battery Pack according

to its shape (it should only fit one way), and press

firmly until the Battery Pack locks in place.

2. Make sure Charger is connected and

operating properly. Give enough time for

Battery Pack to recharge properly.

3. Dispose of old Battery Pack

properly or recycle. Replace Battery Pack.

No AC Output 1. Inverter is overloaded.

2. Defective device connected

1. Check if inverter output rating has been exceeded.

2. Try a different device.

WorkLight not working. Power Switch is OFF. Power Switch must be ON for Worklight to work.

USB-C will not

charge device.

Device may require 20V to

charge, this inverter provides

up to 15V through USB-C.

Check device operator’s manual and verify

that 20V is not required for charging.

Overheating. Blocked vents. Keep all vents clear for proper ventilation.

Wear ANSI-approved safety goggles and

NIOSH-approved dust mask/respirator while blowing

dust out of unit while using compressed air.

Follow all safety precautions whenever diagnosing or servicing the tool.

Disconnect Battery Pack power supply before service.

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase. This

warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or

accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to

you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with

transportation charges prepaid. Proof of purchase date and an explanation of the complaint

must accompany the merchandise. If our inspection verifies the defect, we will either repair or

replace the product at our election or we may elect to refund the purchase price if we cannot

readily and quickly provide you with a replacement. We will return repaired products at our

expense, but if we determine there is no defect, or that the defect resulted from causes not

within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

Andere Handbücher für HYPERMAX LITHIUM 2209C-B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bauer Wechselrichter Handbücher

Bauer

Bauer HYPERMAX LITHIUM 2209C-B Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung