Bauer Ecostar 6000 Bedienungsanleitung

Version V1-9 / XI-2018

Software V04.18 or higher

Operating Manual for BAUER ECOSTAR 6000 2

Table of Contents

1OPERATION AND INPUT.......................................................................................................................... 3

1.1 SLEEP MODE ................................................................................................................................................... 3

1.2 DIALOG WINDOW........................................................................................................................................... 3

1.3 KEYBOARD ...................................................................................................................................................... 4

1.4 ENTERING THE PIN.......................................................................................................................................... 4

2MAIN SCREEN......................................................................................................................................... 5

2.1 INFO SCREEN................................................................................................................................................... 7

2.1.1 Sprinkler.............................................................................................................................................8

2.1.2 Signal Lamp ........................................................................................................................................9

3MAIN MENU......................................................................................................................................... 10

3.1 IRRIGATION MENU ....................................................................................................................................... 11

3.2 BASE SETTINGS ............................................................................................................................................. 14

3.3 MACHINE DATA ............................................................................................................................................ 16

3.4 SMS/MODEM MENU .................................................................................................................................... 19

3.4.1 SMS Commands and Messages .......................................................................................................21

3.5 SYSTEM SETTINGS......................................................................................................................................... 22

3.5.1 Language Menu: ..............................................................................................................................23

3.5.2 Energy management........................................................................................................................25

3.6 SERVICE MENU ............................................................................................................................................. 27

3.7 INFO .............................................................................................................................................................. 28

3.7.1 Water consumption.........................................................................................................................29

3.7.2 Show activities .................................................................................................................................29

3.8 BACKUP MENU ............................................................................................................................................. 30

4CONNECTION PLAN .............................................................................................................................. 32

5BUTTON COMBINATIONS ..................................................................................................................... 34

6SOFTWARE UPDATE.............................................................................................................................. 35

7REPLACING A FUSE ............................................................................................................................... 37

8ACTIVATING SMARTRAIN...................................................................................................................... 37

9ERROR SOURCES AND SOLUTIONS ........................................................................................................ 39

10 TECHNICAL DATA AND DETAILS............................................................................................................. 39

Operating Manual for BAUER ECOSTAR 6000 3

1OPERATION AND INPUT

The ECOSTAR is operated with the touchscreen. In addition, the ECOSTAR 6000 also has five physical

buttons that can be used for operation. These physical buttons perform the same function as the button on

the screen that is shown directly above each physical button.

Each menu contains a “back” button in the lower left corner. Pressing this takes you back to the previous

menu. Pressing the back button for three seconds will take you back to the main screen.

The buttons and move between the pages within a menu. These arrows are only shown if there

is a next or previous page in the respective menu.

1.1 SLEEP MODE

The Ecostar enters into sleep mode after a certain length of time (configurable). In sleep mode, the display

and the electronics themselves are largely deactivated. To restart the Ecostar, press the touchscreen.

Pressing a physical button will not reactivate the Ecostar.

1.2 DIALOG WINDOW

The dialog window opens every time you would like to change a value or select an option. It appears after

you press the value that you would like to change and serves for entering a value or selecting an option.

A numerical value can be entered in the left dialog window with the number block.

Entered numbers can be deleted with the button.

In the right dialog, you can select from among multiple options. When an option is pressed, it appears in

the provided field and can then be confirmed.

To confirm the entry, press the button; or to cancel the entry, press the button.

Operating Manual for BAUER ECOSTAR 6000 4

1.3 KEYBOARD

The keyboard opens every time you want to change a value that is entered as text. The keyboard appears

after you press the value that you would like to change.

The button closes the keyboard without saving the input.

The “BS” (Backspace) button deletes individual letters.

The “DEL” button deletes the entire entry.

Use the “OK” button to close the keyboard and save the entry.

1.4 ENTERING THE PIN

The PIN code for the individual menus is set at the factory to 8570 and can be changed in the software at

any time.

Before opening a menu, you will be asked to enter a PIN code. Every menu offers the option of changing

the PIN code for the respective menu. There is also a master PIN code that allows you to access every

menu.

Operating Manual for BAUER ECOSTAR 6000 5

2MAIN SCREEN

In the main screen, you can start and stop the irrigation. The desired speed (irrigation amount) for the

retraction can be configured here. You can also configure a pre- or post-irrigation or set a time when the

irrigation should start automatically.

In the top line next to the time, the current irrigation status or an error message is displayed in color. If an

error occurs, the info button begins to flash red in addition to the error message.

The current battery status is shown under the time. At less than 50%, this display is yellow; at less than 30%

it is red. At less than 20%, the display flashes red. During an active download, the download progress is also

shown here.

Buttons:

Menu: Takes you to the menu

Start: The irrigation is started immediately as long as no start time or stop time is configured

Stop: The irrigation is stopped immediately. If the irrigation has already ended before the button is

pressed, the ECOSTAR executes the shutdown sequence (turbine closes).

+ / - : Increases / decreases the retraction speed without opening a dialog window

Info button: In order to obtain more information about the current irrigation activity and any error

messages, press the Info button in the upper right corner. This takes you to the

Info screen, which will be described in more detail later.

Operating Manual for BAUER ECOSTAR 6000 6

Pre/post irrigation:

A pre/post-irrigation is activated by pressing the button once briefly. The left button is for pre-irrigation

and the right button for post-irrigation. To deactivate the pre/post-irrigation, the button must be pressed

again once briefly.

If pre/post-irrigation is activated, the button turns green and displays the text “on”.

To configure the pre/post-irrigation, the button must be pressed and held for thee seconds, which opens

the following dialog window:

In this dialog window, you first enter the distance after which the pre-irrigation should be started, then

press the button (left). For post-irrigation, first enter the desired distance of the arm to the machine

then confirm this with the button.

Next, enter the time in minutes for which the machine should irrigate in place and then press the

button.

Start time:

To activate a start time, briefly press the button next to start time. To configure a time, the button must be

held down. You can then enter a time at which the machine should start automatically. If the start button is

pressed now, the machine switches to the status “waiting to irrigate” and the irrigation will start at the

configured time.

Stop time:

The stop time calculated based on the configured speed is shown in the button next to the stop time.

Pressing this button will also switch from display of the stop time to the irrigation duration. Press it again or

restart the control to display the stop time again.

Operating Manual for BAUER ECOSTAR 6000 7

2.1 INFO SCREEN

Various information about the irrigation is displayed in the Info screen.

The configured and current speed (target / actual) as well as the currently extended length and the

calculated stop time are displayed. It is also possible to configure a sprinkler and a signal lamp here. This is

done by pressing the corresponding button once briefly to open the menu of the sprinkler or the signal

lamp. If the button is lit green, the sprinkler and/or the signal lamp is active. When deactivated, the button

is gray.

Pressing the button with the arrow takes you to the logs.

The value for the pressure is only shown if the pressure sensor option is activated in the base settings.

The Open and Close Valve buttons can be used to manually open or close the valve. This is useful for

blowing out the machine, for example.

Gear shift:

With the gear shift button in the upper right corner, it is possible to lower the turbine speed to change the

gear. The turbine slows its speed for as long as the button is pressed or until the speed is 0.

Operating Manual for BAUER ECOSTAR 6000 8

2.1.1 SPRINKLER

There are a number of different options for programming the sprinkler.

It is only ever possible to select and program one option.

Status: The sprinkler is activated or deactivated here.

Option 1: x minutes after the start, for x meters over which the sprinkler is retracted, the sprinkler is

activated.

Based on this example: 10 minutes after the start, the irrigation is activated and remains

activated until the sprinkler has been retracted 100 meters.

Option 2: Once only x meters of pipe is still deployed, the sprinkler is activated up until the end of the

irrigation.

Based on this example: At a remainder of 300 meters deployed pipe, the sprinkler valve is

activated until the end.

Option 3: At hh/mm, the sprinkler switches on for x minutes.

Based on this example: At 10:00, the sprinkler switches on for 20 minutes.

Operating Manual for BAUER ECOSTAR 6000 9

2.1.2 SIGNAL LAMP

The signal lamp serves to give a visual signal during extension of the machine when a certain length has

already been extended.

To activate the signal lamp function, select the option activated in the first line (status) after pressing the

adjacent button. Under distance, specify how many meters of extension should cause the signal lamp to

light / flash. The duration specifies how long the signal lamp should light / flash.

Operating Manual for BAUER ECOSTAR 6000 10

3MAIN MENU

From the main menu, it is possible to navigate to any other menu.

Irrigation menu

Irrigation programs are selected and created here

Base settings

Various settings of the machine as well as the extended pipe

length can be found here

Machine data

Machine parameters are configured here

Protected by PIN code

SMS/Modem

Telephone numbers and SMS settings are configured here

System settings

Settings at the system level, such as the date / time and the

language, are found under system settings

Protected by PIN code

Service

Information that is required for troubleshooting the machine can

be found here.

Protected by PIN code

Info

The operating hours, the water consumption and the battery

voltage are displayed here

Backup

In the backup menu, you can reset the ECOSTAR to the factory

settings as well as save or load parameter sets

Protected by PIN code

Andere Handbücher für Ecostar 6000

Inhaltsverzeichnis

Andere Bauer Bewässerungssystem Handbücher

Bauer

Bauer RAINSTAR A3 Bedienungsanleitung

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Reliable

Reliable F1-300 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

Reliable

Reliable F4FR Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Reliable

Reliable F1FR42 Series Bedienungsanleitung

Reliable

Reliable F1FR-300 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung