Baumalight RC442 Bedienungsanleitung

RC442, RC582, RC586 And RC780
Hydraulic Auger Drive
OPERATOR’S MANUAL
Issue Date: March 2022

TABLE OF CONTENTS
1 INTRODUCTION ��������������������������������������������������������������������������������������������������������������������������������� 1
1�1 Overview�������������������������������������������������������������������������������������������������������������������������������������� 1
1�2 Intended Use and Foreseeable Misuse ������������������������������������������������������������������������������������ 1
2 SAFETY������������������������������������������������������������������������������������������������������������������������������������������������ 2
2�1 Safety Alert Symbol and Safety Words ������������������������������������������������������������������������������������ 2
2�2 Operational Hazards������������������������������������������������������������������������������������������������������������������� 2
Prepare For Emergencies ���������������������������������������������������������������������������������������������������������� 3
Replace Safety Signs ����������������������������������������������������������������������������������������������������������������� 3
Do Not Allow Riders ������������������������������������������������������������������������������������������������������������������� 3
Lower Operating Speed ������������������������������������������������������������������������������������������������������������� 3
Avoid Rollover ���������������������������������������������������������������������������������������������������������������������������� 4
Avoid Powerlines & Underground Utilities ������������������������������������������������������������������������������ 4
Detach Auger Drive Safely��������������������������������������������������������������������������������������������������������� 4
Hazards From Modifying Equipment ���������������������������������������������������������������������������������������� 5
2�3 Maintenance Hazards����������������������������������������������������������������������������������������������������������������� 6
3 SAFETY SIGNS����������������������������������������������������������������������������������������������������������������������������������� 8
3�1 Safety Signs - RC442������������������������������������������������������������������������������������������������������������������ 8
3�2 Safety Signs - RC582, RC586 And RC780 ������������������������������������������������������������������������������ 10
4 INITIAL SETUP���������������������������������������������������������������������������������������������������������������������������������� 12
5 OPERATION �������������������������������������������������������������������������������������������������������������������������������������� 13
5�1 Preparation for Use ������������������������������������������������������������������������������������������������������������������ 13
5�2 Pre-Operation Check List �������������������������������������������������������������������������������������������������������� 13
5�3 Components������������������������������������������������������������������������������������������������������������������������������ 14
5�4 Attach To Power Unit���������������������������������������������������������������������������������������������������������������� 15
5�5 Detach Auger Drive ������������������������������������������������������������������������������������������������������������������ 16
5�6 Transporting������������������������������������������������������������������������������������������������������������������������������ 17
5�7 First Time User Tips ����������������������������������������������������������������������������������������������������������������� 17
5�8 Field Operation ������������������������������������������������������������������������������������������������������������������������� 18
6 SERVICE AND MAINTENANCE������������������������������������������������������������������������������������������������������ 19
6�1 Maintenance������������������������������������������������������������������������������������������������������������������������������ 19
6�2 Inspection���������������������������������������������������������������������������������������������������������������������������������� 19
6�3 Check Gearbox Oil Level ��������������������������������������������������������������������������������������������������������� 20
6�4 Change Gearbox Oil ����������������������������������������������������������������������������������������������������������������� 21
7 TROUBLESHOOTING ���������������������������������������������������������������������������������������������������������������������� 22
8 STORAGE������������������������������������������������������������������������������������������������������������������������������������������ 23
8�1 Storing Auger Drive������������������������������������������������������������������������������������������������������������������ 23
8�2 Removing From Storage ��������������������������������������������������������������������������������������������������������� 23
BAUMALIGHT ATTACHMENT WARRANTY������������������������������������������������������������������������������������� 24
ii

1 INTRODUCTION
Congratulations on your choice of a Baumalight
Hydraulic Auger Drive to complement your drilling
operation. This equipment has been designed and
manufactured to meet the needs of a discriminating
buyer for ecient hole drilling.
The drive is hydraulically powered by the hydraulic
system on your power unit. Safe, ecient
and trouble free operation of your auger drive
requires that you and anyone else who will be
operating or maintaining the auger drive, read and
understand the Safety, Operation, Maintenance
and Troubleshooting information contained within
the Operator’s Manual.
This manual covers the Baumalight Auger Drive
models RC442, RC582, RC586 and RC780. Use
the Table of Contents as a guide to locate required
information.
Keep this manual handy for frequent reference
and to pass on to new operators or owners. Call
your Baumalight dealer, distributor or the factory
if you need assistance, information or additional
copies of the manuals.
When this power unit is worn out and no longer in
use, it should be returned to the retailer or other
party for recycling.
OPERATOR ORIENTATION - The directions left,
right, front and rear, as mentioned throughout this
manual, are as seen from the operators seat and
facing in the direction of travel.
1�1 Overview
The auger drive is designed to be used by
experienced operators, trained in the safe operation
of the power unit and trained in the hazards related
to using the auger drive and the safe use of the
auger drive for the intended purpose. Operators
will require personal protective equipment to
reduce the risk from some hazards that cannot be
completely eliminated or controlled by the design
of the tool.
Care is required to ensure that the auger drive and
auger will not come across metallic objects, stones
or other materials.
Auger drive tools are not designed for use in
hazardous atmospheres where there is a risk
of re or explosion due to ammable gases or
vapors. Use in hazardous, explosive atmospheres
is prohibited.
Serious injury or death of the operator or bystanders
may be caused if the tool is misused. Misuse may
also cause damage to the power unit carrying the
implement.
1�2 Intended Use and Foreseeable
Misuse
1

2 SAFETY
You must read, understand and follow the
instructions given by the skid steer manufacturers,
as well as the instructions in this manual.
The safety information in this manual is denoted
by the safety alert symbol:
^
This symbol means ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!
The level of risk is indicated by the following signal
words:
^^ DANGER
DANGER - Indicates a hazardous
situation, which, if not avoided, WILL
result in death or serious injury�
^ WARNING
WARNING - Indicates a hazardous
situation, which, if not avoided, could
result in death or serious injury�
^ CAUTION
CAUTION - Indicates a hazardous
situation, which, if not avoided, could
result in minor or moderate injury�
NOTICE
NOTICE - Indicates a situation that could
result in damage to the equipment or
other property.
2�1 Safety Alert Symbol and Safety
Words
^ WARNING
Prevent death or serious injury�
Read and understand this manual before
operating auger drive�
Always stop engine and remove key
before leaving operators seat�
Never allow anyone near the auger drive
during operation�
Travel at a safe speed�
^ WARNING
Prevent death or serious injury from
moving parts�
Moving parts can crush and dismember�
Do not operate without guards and
shields in place�
Disconnect and lockout power source
before adjusting or servicing�
^ WARNING
Use auger drive only for the designed
applications�
Any other use may result in personal
injury, damage to equipment and may
void the warranty�
2�2 Operational Hazards
2

^ WARNING
Protect from ying debris.
Wear proper safety glasses, goggles,
or a face shield to protect from ying
debris�
Carefully read all safety messages in this manual
and on equipment safety signs. Keep safety signs
in good condition and replace missing or damaged
safety signs.
New equipment components and repair parts must
include the current safety decal.
Learn how to properly operate equipment.
NEVER operate or work around this equipment
without proper instruction, while fatigued or under
the inuence of alcohol, prescription or non-
prescription medication or if feeling ill.
Keep your equipment in proper working condition.
Know the regulations and laws that apply to you
and your industry. This manual is not to replace
any regulations or laws. Additional information
may be found at: www.asae.org or www.osha.gov.
If you do not understand any part of this manual,
contact Baumalight at 866-820-7603.
Prepare For Emergencies
• Be prepared in case of emergencies.
• Keep a re extinguisher and rst aid kit close
to the machine.
• Keep emergency phone numbers close to
your phone.
• Know your address so emergency services
can locate you if an emergency arises.
Replace Safety Signs
• Replace missing or damaged safety signs.
• Safety signs are identied in Section 3 of this
manual.
• Replacement safety signs are available from
your Baumalight dealer.
Do Not Allow Riders
• NEVER lift or carry anyone on cutter.
• NEVER use cutter as a work platform.
• NEVER allow passengers on cutter.
Lower Operating Speed
Keep cutter low and move at slow speeds on rough
or uneven terrain.
Lower operating speed while operating in heavy
conditions.
3

Avoid Rollover
The equipment may rollover, resulting in death or
serious injury. To help prevent rollover:
• Travel at a slow speed.
• Avoid sharp turns & sudden movement on
slopes.
• Carry auger drive close to the ground.
• Avoid holes, ditches and other obstructions
which may cause equipment to rollover.
• Balance load so weight is evenly distributed
and load is stable.
• Use caution when operating on slopes and do
not operate on excessively steep slopes.
• Do not exceed load capacity of equipment.
Avoid Powerlines & Underground
Utilities
^ DANGER
Prevent electrocution�
Death or serious injury can result if
equipment comes near or contacts
power lines�
Electrocution can occur without direct
contact�
• Check clearance before raising equipment.
• Have local utilities locate and mark under
ground wires, cables, pipelines and other
hazards before operation.
DO NOT leave the operator’s seat if any part of the
equipment contacts electric lines or cables.
Detach Auger Drive Safely
Detach auger drive on a rm and level surface.
Be sure people, livestock and pets are clear of
machinery.
Raised Attachment
^ WARNING
Crushing hazard�
Raised, unsupported auger drive can
fall, resulting in death or serious injury�
Never enter the area under a raised
auger drive�
A raised auger drive can lower unexpectedly,
resulting in death or serious injury.
NEVER enter area under a raised auger drive.
Lower auger drive to ground, engage parking
brake, shut o engine and remove key before
servicing.
4

Hazards From Modifying Equipment
Do not make any alterations to your auger drive.
Altering may cause your equipment to be unsafe
and may void the manufacturers’ warranty.
^ WARNING
Pressurized uids can penetrate the
skin�
Hydraulic hoses can fail from age,
damage and exposure�
Use body and face protection while
searching for leaks� A tiny, almost
invisible leak can penetrate the skin,
thereby requiring immediate medical
attention�
Use wood or cardboard to detect
hydraulic leaks, never use your hands�
Escaping uid under pressure can penetrate the
skin causing serious injury.
Prevent the hazard by relieving pressure before
connecting or disconnecting hydraulic lines. Verify
all connections are tight before applying pressure.
Search for leaks with a piece of cardboard or wood.
Protect hands and body from high pressure uids.
If an accident occurs, see a doctor immediately.
Any uid injected into the skin must be surgically
removed within a few hours or serious infection
may result.
Avoid Loud Noise
^ WARNING
Prolonged exposure to loud noise can
cause impairment or loss of hearing�
Wear a suitable hearing protective device
such as earmus or earplugs to protect
against objectionable or uncomfortable
loud noises�
Stay Clear Of Moving Parts
^ WARNING
Moving parts can cause serious injury
or death�
Keep shields and guards in place at all
times� DO NOT operate without shields
and guards�
DO NOT wear loose tting clothing.
5

2�3 Maintenance Hazards
Before servicing, park machine on a rm and
level surface, set parking brake and place a “Do
Not Operate” tag on control panel. Read and
understand this manual. If you do not understand
any part of the manual, contact Baumalight at 866-
820-7603.
Always wear face and/or eye protection, safety
shoes, and other protective equipment appropriate
for the job.
Do not make unauthorized modications. Contact
Baumalight at 866-820-7603. Before you weld,
cut/drill holes, or make any other modications.
Always use Baumalight replacement parts.
^ WARNING
Moving parts can crush and cut�
Keep clear of moving components�
Follow lockout procedure before
servicing�
^ WARNING
Crushing hazard�
Before performing inspections, service
or maintenance:
• Park machine on rm, level surface.
• Engage parking brake�
• Turn engine o and remove key.
• Place “Do Not Operate” tag on
control panel�
^ WARNING
Entanglement hazard�
Keep clear of moving components�
Wear proper protective equipment
appropriate for the job�
^ WARNING
Burn hazard�
Hot and high pressure hydraulic oil�
Allow oil to cool before servicing�
6

This page intentionally left blank.
7

3 SAFETY SIGNS
3�1 Safety Signs - RC442
A. D005262 ^WARNING - P65 warning
information.
WARNING: This product can expose you to chemicals
including 1,3-Butadiene and lead, which are known to the state of
California to cause cancer and birth defects or other reproductive
harm. For more information go to www.P65Warnings.ca.gov.
D005262
B. D005126 ^ WARNING - Pressurized uid
hazard. Keep away from machine.
D005126
The two and four panel safety decals are pictorial
and have a yellow background. The panel with a
triangle indicates the potential hazard. The panel
without a triangle indicates how to avoid the
hazard.
If any of the decals are missing, are damaged, or
if you do not understand the decal, please contact
your dealer.
C
B
A
E
D
F
F*
8
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog
Chamberlain Garog D Series Bedienungsanleitung

Parker
Parker PDS Series Bedienungsanleitung

Festo
Festo DGC G Series Einrichtungshandbuch

Binks
Binks QS-5012-1-CE Bedienungsanleitung











