Baxi MainEco Heat 15 Handbuch

Installation and Service Manual

Gas Fired Wall Mounted Powered Flue Condensing Boiler

United Kingdom

These instructions include the Benchmark Commissioning Checklist

and should be left with the user for safe keeping.

They must be read in conjunction with the Flue Installation Guide.

MainEco Heat

15 - 18 - 24

2 MainEco Heat 7215845 - 01 (08/14)

1 Introduction

You have just purchased one of our appliances and we thank you for the trust you have placed in our products. Please note that

the product will provide good service for a longer period of time if it is regularly checked and maintained. Our customer support

network is at your disposal at all times.

0086

ISO 9001

FM 00866

The Benchmark Scheme

Benchmark places responsibilities on both manufacturers and installers.

The purpose is to ensure that customers are provided with the correct

equipment for their needs, that it is installed, commissioned and

serviced in accordance with the manufacturer’s instructions by

competent persons and that it meets the requirements of the

appropriate Building Regulations. The Benchmark Checklist can be

used to demonstrate compliance with Building Regulations and should

be provided to the customer for future reference.

Installers are required to carry out installation, commissioning and

servicing work in accordance with the Benchmark Code of Practice

which is available from the Heating and Hotwater Industry Council who

manage and promote the Scheme. Visit www.centralheating.co.uk for

more information.

Building Regulations and the Benchmark Commissioning

Checklist

Building Regulations (England & Wales) require notification of the

installation of a heating appliance to the relevant Local Authority

Building Control Department. This can be achieved via a

Competent Persons Self Certification Scheme as an option to

notifying the Local Authority directly.

The Health & Safety Executive operates the ‘Gas Safe Register’, a self-

certification scheme for gas heating appliances.

This company is a member of the Benchmark initiative and fully

supports the aims of the programme. Its aim is to improve the

standards of installation and commissioning of central heating systems

in the UK and to encourage the regular servicing of all central heating

systems to ensure safety and efficiency.

Building Regulations require that installations should comply with

manufacturer's instructions. It is therefore important that the

commissioning checklist is completed by the installer. The relevant

section of Building Regulations only relates to dwellings. Therefore the

checklist only applies if the appliance is being installed in a dwelling or

some related structure.

The flowchart opposite gives guidance for installers on the process

necessary to ensure compliance with Building Regulations.

Model Range

Baxi MainEco Heat 15

G.C.No 41-470-15

Baxi MainEco Heat 18

G.C.No 41-470-16

Baxi MainEco Heat 24

G.C.No 41-470-17

7215845 - 01 (08/14) MainEco Heat 3

Installer Notification Guidelines

Choose Building

Regulations Notification

Route

Contact your relevant Local

Authority Building Control

(LABC) who will arrange

an inspection or contact

a government approved

inspector

LABC will record the data

and will issue a

certificate of compliance

‘Gas Safe Register’ will issue a

Building Regulations Compliance

Certificate to the property owner

and inform the relevant LABC

You must ensure that the

certificate number issued by

the ‘Gas Safe Register’ is written

onto the Benchmark Checklist

Scheme Members only

Call ‘Gas Safe Register’ on:

0800 408 5577

or log onto:

www.gassaferegister.co.uk

within 10 days

If you notify via the ‘Gas Safe

the Building Regulations

certificate on members’ behalf

Complete the

Benchmark Checklist

Install and Commission this

appliance to manufacturer's

instructions

Competent Person's

Self Certification Scheme

Building Control

Complete the

Benchmark Checklist

Install and Commission this

appliance to manufacturer's

instructions

Installer Notification Guidelines

4 MainEco Heat

Contents

1 Introduction

1.1 General

1.2 Additional Documentation

1.3 Symbols Used

1.4 Abbreviations

1.5 Extent of Liabilities

1.5.1 Manufacturer’s Liability

1.5.2 Installer’s Liability

1.6 Homologations

1.6.1 Certifications

1.6.2 Directives

1.6.3 Standards

2 Safety

2.1 General Safety Instructions

2.2 Recommendations

2.3 Specific Safety Instructions

2.3.1 Handling

3 Technical Specifications

3.1 Technical Data

3.2 Dimensions and Connections

3.3 Electrical Diagram

4 Description of the Product

4.1 General Description

4.2 Operating Principle

4.3 Main Components

4.4 Control Panel Description

4.4.1 User Interaction Controller

4.5 Standard Delivery

4.6 Accessories & Options

4.6.1 Optional Extras

5 Before Installation

5.1 Installation Regulations

5.2 Installation Requirements

5.2.1 Gas Supply

5.2.2 Electrical Supply

5.2.3 Hard Water Areas

5.2.4 Bypass

5.2.5 System Control

5.2.6 Treatment of Water Circulating Systems

5.2.7 System Details - General

5.2.8 Low Head Installation / Open

5.2.9 Sealed Systems Details

5.3 Choice of the Location

5.3.1 Location of the Appliance

5.3.2 Data Plate

5.3.3 Bath & Shower Rooms

5.3.4 Ventilation

5.3.5 Condensate Drain

5.3.6 Clearances - Access in Service

5.3.7 Flue / Chimney Location

5.3.8 Horizontal Flue / Chimney Systems

7215845 - 01 (08/14) MainEco Heat 5

Contents

5.3.9 Flue/Chimney Trim

5.3.10 Terminal Guard

5.3.11 Flue/Chimney Deflector

5.3.12 Flue/Chimney Accessories

5.4 Unpacking & Initial Preparation

5.4.1 Unpacking

5.4.2 Initial Preparation

5.4.3 Making the Water Connection

5.4.4 Filling the Condensate Trap

5.4.5 Connecting the Condensate Drain

5.4.6 Connecting the Gas Supply

6 Installation

6.1 Air Supply / Flue Gas Connections

6.1.1 Connecting the Top Flue

6.2 Electrical Connections

6.2.1 Electrical Connections of the Appliance

6.2.2 Connecting External Devices

6.3 Filling the System

6.4 Completing the Installation

6.4.1 Completion

7 Commissioning

7.1 General

7.2 Checklist before Commissioning

7.2.1 Preliminary Electrical Checks

7.2.2 Checks

7.3 Commissioning Procedure

7.4 Gas Settings

7.4.1 ‘Chimney Sweep’ Mode

7.4.2 ‘Chimney Sweep’ Mode - Combustion Check

7.5 Configuring the System

7.5.1 Check the Operational (Working) Gas Inlet Pressure & Gas Rate

7.6 Final Instructions

8 Operation

8.1 General

8.2 Start-Up

8.3 Shutdown

8.4 Use of the Control Panel

8.5 Frost Protection

9 Settings

9.1 Parameters

6 MainEco Heat

Contents

10 Maintenance

10.1 General

10.2 Standard Inspection & Maintenance Operation

10.3 Specific Maintenance Operation

10.3.1 Spark Ignition Electrode

10.3.2 Automatic Air Vent

10.3.3 Condensate Trap

10.3.4 Removal of Ducts

10.3.5 Pressure Switch (21 & 24 only)

10.3.6 Flow Temperature Sensor

10.3.7 Overheat Sensor

10.3.8 Return Temperature Sensor

10.3.9 Parameter Unit

10.3.10 Gas Valve

10.3.11 Control & Fan Assembly

10.3.12 User Interaction Controller

10.3.13 Setting the Gas Valve (CO2Check)

11 Troubleshooting

11.1 Error Codes - Auto Reset

11.2 Lockout Condition

12 Decommissioning Procedure

12.1 Decommissioning Procedure

13 Spare Parts

13.1 General

13.2 Spare Parts List

14 Notes

Benchmark Commissioning Checklist

7215845 - 01 (08/14)

7215845 - 01 (08/14) MainEco Heat 7

Introduction 1

1 Introduction

1.1 General

WARNING

Installation, repair and maintenance must only be

carried out only by a competent person. This

document is intended for use by competent persons,

WARNING

Check the information on the data plate is

compatible with local supply conditions.

All Gas Safe registered engineers carry an ID card with their

licence number and a photograph. You can check your engineer

is registered by telephoning 0800 408 5500 or online at

www.gassaferegister.co.uk

This appliance must be installed in accordance with the

manufacturer’s instructions and the regulations in force. If the

appliance is sold or transferred, or if the owner moves leaving

the appliance behind you should ensure that the manual is kept

with the appliance for consultation by the new owner and their

installer. Read the instructions fully before installing or using the

appliance.

In GB, this must be carried out by a competent person as stated

in the Gas Safety (Installation & Use) Regulations (as may be

amended from time to time).

Definition of competence: A person who works for a Gas Safe

registered company and holding current certificates in the

relevant ACS modules, is deemed competent.

In IE, this must be carried out by a competent person as stated

in I.S. 813 “Domestic Gas Installations”.

The addition of anything that may interfere with the normal

operation of the appliance without express written permission

from the manufacturer or his agent could invalidate the

appliance warranty. In GB this could also infringe the Gas Safety

(Installation and Use) Regulations.

The appliance is designed as a boiler for use in residential

domestic environments on a governed meter supply only. The

selection of this boiler is entirely at the owner’s risk. If the

appliance is used for purposes other than or in excess of these

specifications, the manufacturer will not accept any liability for

resulting loss, damage or injury.

The manufacturer will not accept any liability whatsoever

for loss, damage or injury arising as a result of failure to

observe the instructions for use, maintenance and

installation of the appliance.

8 MainEco Heat

1 Introduction

7215845 - 01 (08/14)

1.3 Symbols Used

DHW: Domestic hot water

CH: Central heating

GB: Great Britain

IE: Ireland

BS: British standard

HHIC: Heating and Hotwater Industry Council

CSM: Chimney Sweep Mode

PU: Parameter Unit

PCB: Printed Circuit Board

DANGER

Risk of a dangerous situation causing serious

physical injury.

WARNING

Risk of a dangerous situation causing slight physical

injury.

CAUTION

Risk of material damage.

Signals important information .

Signals a referral to other instructions or other pages

in the instructions.

1.4 Abbreviations

1.2 Additional Documentation

These Installation & Service Instructions must be read in

conjunction with the Flue Accessories & Fitting Guide supplied in

the Literature Pack.

Various timers, external controls, flue accessories, etc. are

available as optional extras. Full details are contained in the

relevant sales literature.

In these instructions, various levels are employed to draw the

user's attention to particular information. In so doing, we wish to

safeguard the user's safety, prevent hazards and guarantee

correct operation of the appliance. Each level is accompanied by

a warning triangle

7215845 - 01 (08/14) MainEco Heat 9

Introduction 1

1.5 Extent of Liabilities

1.5.1 Manufacturer's Liability

Our products are manufactured in compliance with the

requirements of the various european applicable Directives.

They are therefore delivered with marking and all relevant

documentation. In the interest of customers, we are

continuously endeavouring to make improvements in product

quality. All the specifications stated in this document are

therefore subject to change without notice.

The manufacturer will not accept any liability for loss, damage or

injury arising as a result of:-

Failure to abide by the instructions on using the appliance.

Failure to regularly maintain the appliance, or faulty or

inadequate maintenance of the appliance.

Failure to abide by the instructions on installing the

appliance.

This company declares that no substances harmful to

health are contained in the appliance or used during

appliance manufacture.

The appliance is suitable only for installation in GB and IE and

should be installed in accordance with the rules in force, and

only used in a suitably ventilated location.

In GB, the installation must be carried out by a Gas Safe

Registered Installer. It must be carried out in accordance with

the current and relevant requirements of legislation and

guidance including the:-

• Gas Safety (Installation & Use) Regulations.

• The appropriate Building Regulations either The

Building Regulations, The Building Regulations

(Scotland), Building Regulations (Northern Ireland).

• The Water Fittings Regulations or Water Byelaws in

Scotland.

• The Current I.E.E. Wiring Regulations.

Where no specific instructions are given, reference should be

made to the relevant British Standard Code of Practice.

In IE, the installation must be carried out by a competent Person

and installed in accordance with the current edition of I.S. 813

‘Domestic Gas Installations’, the current Building Regulations

and reference should be made to the current ETCI rules for

electrical installation.

Prior to commissioning all systems must be thoroughly

flushed and treated after installation with inhibitor (see

section 5.2.6). Failure to do so will invalidate the appliance

warranty.

Incorrect installation could invalidate the warranty and may lead

to prosecution.

10 MainEco Heat

1 Introduction

7215845 - 01 (08/14)

1.5.2 Installer's Responsibility

The installer is responsible for the installation and initial start up

of the appliance. The installer must adhere to the following:

Read and follow the instructions given in the manuals

provided with the appliance.

Carry out installation in compliance with the prevailing

legislation and standards.

Ensure the system is flushed and inhibitor added.

Install the flue/chimney system correctly ensuring it is

operational and complies with prevailing legislation and

standards, regardless of location of the boiler’s installation.

Only the installer should perform the initial start up and carry

out any checks necessary.

Explain the installation to the user.

Complete the Benchmark Commissioning Checklist - this is a

condition of the warranty !

Warn the user of the obligation to check the appliance and

maintain it in good working order.

Give all the instruction manuals to the user.

1.6 Homologations

1.6.1 Certifications

EC - Declaration of Conformity

Baxi Heating Uk Limited being the manufacturer / distributor

within the European Economic Area of the following

Baxi MainEco Heat

declare that the above is in conformity with the provisions of the

Council Directive

2009/142 EC 92/42 EEC 2004/108 EC 2006/95 EC

and has been subject to the following conformity procedures laid

down in

Annex 2 - Article 3 of 2009/142 EC

under the supervision of the British Standards Institution, a

Notified Body authorized by the United Kingdom Competent

Authority, and carrying the Notified Body Number 0086.

1.6.2 Directives

The boiler meets the requirements of Statutory Instrument “ The

Boiler (Efficiency) Regulations 1993 No3083” and is deemed to

meet the requirements of Directive 92/42/EEC on the energy

efficiency requirements for new hot water boilers fired with liquid

or gaseous fuels:-

Type test for purpose of Regulation 5 certified by:

Notified Body 0063.

Product/Production certified by:

Notified Body 0086.

For GB/IE only.

Andere Handbücher für MainEco Heat 15

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Baxi Kessel Handbücher

Baxi

Baxi Combi 80 Eco Betriebsanleitung

Baxi

Baxi Nuvola 3+ BS40 Bedienungsanleitung

Baxi

Baxi Duo-tec 2 Combi GA Range Versionshinweis

Baxi

Baxi NUVOLA DUO-TEC GA Series Leitfaden

Baxi

Baxi Neta-tec Plus Konfigurationshandbuch

Baxi

Baxi Neta-tec Combi GA Range Versionshinweis

Baxi

Baxi Combi 130 HE Betriebsanleitung

Baxi

Baxi Ecoblue plus combi 24 Bedienungsanleitung

Baxi

Baxi Combi 130 HE Benutzerhandbuch

Baxi

Baxi Solo 12 HE Benutzerhandbuch

Baxi

Baxi LUNA DUO-TEC MP+ 1.115 Leitfaden

Baxi

Baxi Bermuda SP3 Bedienungsanleitung

Baxi

Baxi Combi 133 HE Plus Betriebsanleitung

Baxi

Baxi Maxflow Combi FS Benutzerhandbuch

Baxi

Baxi EcoBlue System 12 Handbuch

Baxi

Baxi NUVOLA DUO-TEC GA 16 Leitfaden

Baxi

Baxi ECO4S 24 F Montageanleitung

Baxi

Baxi ECOGEN Bedienungsanleitung

Baxi

Baxi Megaflo System HE A Range Bedienungsanleitung

Baxi

Baxi Bermuda 401 Benutzerhandbuch

Baxi

Baxi Ultra Heat 15 Bedienungsanleitung

Baxi

Baxi Bermuda 553 Benutzerhandbuch

Baxi

Baxi Eco Compact Bedienungsanleitung

Baxi

Baxi ECOGEN 24/1.0 Betriebsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch