BCM EBC3410 Bedienungsanleitung

EBC3410

All-in-One NS Geode GX1

Single Board with LCD, AC97 Audio,

& Dual 10/100 Base-Tx Ethernet

User’s Manual

1st Ed. - 28 July 2001

EBC-3410

BCM Advanced Research 1

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO

THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE

RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION

AGAINTST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

User’s Manual

BCM Advanced Research 2

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

BCM Advanced Research, reserves the right to make changes, without notice, to any

product, including circuits and/or software described or contained in this manual in order to

improve design and/or performance. BCM Advanced Research assumes no responsibility

or liability for the use of the described product(s), conveys no license or title under any

patent, copyright, or mask work rights to these products, and makes no representations or

warranties that these products are free from patent, copyright, or mask work right

infringement, unless otherwise specified. Applications that are described in this manual are

for illustration purposes only. BCM Advanced Research makes no representation or

warranty that such application will be suitable for the specified use without further testing

or modification.

EBC-3410

BCM Advanced Research 3

A Message to the Customer

BCM Customer Services

Each and every BCM’s product is built to the most exacting specifications to ensure

reliable performance in the harsh and demanding conditions typical of industrial

environments. Whether your new BCM device is destined for the laboratory or the factory

floor, you can be assured that your product will provide the reliability and ease of operation

for which the name BCM has come to be known.

Your satisfaction is our primary concern. Here is a guide to BCM’s customer services. To

ensure you get the full benefit of our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult this manual first.

To receive latest update information, please visit our Web site at:

http://www.bcmcom.com/

If you still cannot find the answer, gather all the information or questions that apply to your

problem, and with the product close at hand, call your dealer. Our dealers are well trained

and ready to give you the support you need to get the most from your BCM’s products. In

fact, most problems reported are minor and are able to be easily solved.

In addition, technical support is available from BCM’s engineers via e-mail. We are always

ready to give advice on application requirements or specific information on the installation

and operation of any of our products. Please do not hesitate to e-mail us. Technical

support e-mail address is:

[email protected]

User’s Manual

BCM Advanced Research 4

Product Warranty

BCM warrants to the original purchaser, each of its products will be free from defects in

materials and workmanship for a year from the date of purchase.

1. This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by BCM, or which have been subject to

misuse, abuse, accident or improper installation. BCM assumes no liability under the

terms of this warranty as a consequence of such events. Because of BCM’s high

quality-control standards and rigorous testing, most of our customers never need to

use our repair service. If a BCM’s product is defective, it will be repaired or replaced at

no charge during the warranty period. For out-of-warranty repairs, you will be billed

according to the cost of replacement materials, service time, and freight. Please

consult your dealer for more details

EBC-3410

BCM Advanced Research 5

Packing List

Before you begin installing your single board, please make sure that the following

materials have been shipped:

 1 EBC-3410 All-in-One NS Geode GX1 Computing Module

 1 Quick Installation Guide

 1 Audio jacks and USB connector daughter board

 1 CD-ROM contains the followings:

— User’s Manual (this manual in PDF file)

— Ethernet driver and utilities

— VGA drivers and utilities

— Audio drivers and utilities

— Latest BIOS (as of the CD-ROM was made)

 Cable set includes the followings:

— 1 PS/2 keyboard and mouse Y cable (6-pin, Mini-DIN)

— 1 IDE HDD cable (44-pin, pitch 2.0mm)

— 1 FDD cable (34-pin, pitch 2.0mm)

— 1 bracket with one Printer port cable (26-pin, pitch 2.0mm) and one Serial port

cable (10-pin, pitch 2.0mm)

— 2 flat cables (10-pin, pitch 2.0mm) for connecting the Audio/USB daughter board

to the EBC-3410

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

User’s Manual

BCM Advanced Research 6

1. MANUAL OBJECTIVES........................................................................................1-11

2. INTRODUCTION ...................................................................................................2-12

2.1 System Overview ..............................................................................................2-12

2.2 System Specifications......................................................................................2-13

2.3 Architecture Overview......................................................................................2-16

2.3.1 CPU/GX1 and CS5530A .......................................................................................... 2-17

2.3.2 XPRESS Graphics ................................................................................................... 2-17

2.3.3 PCI Bus .................................................................................................................... 2-17

2.3.4 PC/104 Interface ...................................................................................................... 2-18

2.3.5 SDRAM Interface ..................................................................................................... 2-18

2.3.6 TFT Panel Interface.................................................................................................. 2-18

2.3.7 Audio ........................................................................................................................ 2-18

2.3.8 IDE Interface ............................................................................................................ 2-19

2.3.9 USB .......................................................................................................................... 2-19

2.3.10 Realtek RTL8139C Ethernet Controller.................................................................... 2-19

2.3.11 Winbond W83977F-A ............................................................................................... 2-19

2.3.12 Compact Flash Interface .......................................................................................... 2-20

3. HARDWARE CONFIGURATION ..........................................................................3-21

3.1 Installation Procedure ......................................................................................3-21

3.2 Safety Precautions............................................................................................3-21

3.2.1 Warning! ................................................................................................................... 3-21

3.2.2 Caution! .................................................................................................................... 3-21

3.3 Installing DRAM (SODIMMs) ............................................................................3-22

3.3.1 System Memory ....................................................................................................... 3-22

3.3.2 Supplementary Information About SODIMM ............................................................ 3-22

3.3.3 Memory Installation Procedures............................................................................... 3-22

3.4 Jumper & Connector ........................................................................................3-23

3.4.1 Jumper & Connector Layout..................................................................................... 3-23

3.4.2 Jumper & Connector List.......................................................................................... 3-24

3.5 Setting Jumpers................................................................................................3-26

3.5.1 LCD Driving & Backlight Voltage Select (J1)............................................................ 3-27

3.5.2 Clear CMOS (J2 / Pin 1, 3, 5)................................................................................... 3-27

3.5.3 LCD Clock Signal Select (J2 / Pin 2, 4, 6)................................................................ 3-28

3.5.4 COM2 RS-232/422/485 Select (J3, J4).................................................................... 3-28

3.6 Connector Definitions ......................................................................................3-29

3.6.1 Parallel Port Connector (CN1).................................................................................. 3-29

3.6.2 DB25 Parallel Port Connector .................................................................................. 3-30

3.6.3 Signal Description – Parallel Port Connector (CN1)................................................. 3-31

3.6.4 Floppy Connector (CN2) .......................................................................................... 3-32

3.6.5 Signal Description – Floppy Connector (CN2) ......................................................... 3-33

3.6.6 System Fan Connector (CN3) .................................................................................. 3-34

3.6.7 IrDA Connector (CN4) .............................................................................................. 3-34

EBC-3410

BCM Advanced Research 7

3.6.8 Signal Configuration – IrDA Connector (CN4).......................................................... 3-34

3.6.9 LCD Inverter Connector (CN5)................................................................................. 3-34

3.6.10 Signal Configuration – LCD Inverter Connector (CN5) ............................................ 3-34

3.6.11 TFT Panel Connector (CN6) .................................................................................... 3-35

3.6.12 Signal Description – TFT Panel Connector (CN6) ................................................... 3-35

3.6.13 Signal Configuration – TFT Panel Displays.............................................................. 3-37

PC/104 Connector (CN7, CN8) ............................................................................................. 3-38

3.6.14 Signal Description – PC/104 Connector (CN7, CN8) ............................................... 3-39

3.6.15 IDE Connector (CN9) ............................................................................................... 3-43

3.6.16 Signal Description – IDE Connector (CN9) .............................................................. 3-44

3.6.17 Audio Connector (CN10) .......................................................................................... 3-44

3.6.18 Signal Description – Audio Connector (CN10) ......................................................... 3-44

3.6.19 Pin Header Serial Port 2 Connector in RS-232 Mode (CN11) ................................. 3-45

3.6.20 Serial Port 2 with External DB9 Connector .............................................................. 3-45

3.6.21 Signal Description – Serial Port 2 – COM2 in RS-232 Mode (CN11)...................... 3-45

3.6.22 Pin Header Serial Port 2 Connector in RS-422 Mode (CN11) ................................. 3-46

3.6.23 Signal Description – Serial Port 2 – COM2 in RS-422 Mode (CN11)...................... 3-46

3.6.24 Pin Header Serial Port 2 Connector in RS-485 Mode (CN11) ................................. 3-47

3.6.25 Signal Description – Serial Port 2 – COM2 in RS-485 Mode (CN11)....................... 3-47

3.6.26 USB Connector (CN12)............................................................................................ 3-48

3.6.27 Signal Description – USB Connector (CN12)........................................................... 3-48

3.6.28 DB9 Serial Port 1 Connector in RS-232 Mode (CN13) ............................................ 3-49

3.6.29 Signal Description – Serial Port 1 – COM1 in RS-232 Mode (CN13)....................... 3-49

3.6.30 CRT Connector (CN14)............................................................................................ 3-50

3.6.31 Signal Description – CRT Connector (CN14)........................................................... 3-50

3.6.32 Keyboard and PS/2 Mouse Connector (CN15) ........................................................ 3-51

3.6.33 Signal Description – Keyboard & PS/2 Mouse Connectors (CN15) ......................... 3-51

3.6.34 10/100BASE-Tx Ethernet Connector (CN16, CN17)................................................ 3-51

3.6.35 Signal Description – 10/100Base-Tx Ethernet Connector (CN16, CN17) ................ 3-51

3.6.36 CD-ROM Audio Input Connector (J5)....................................................................... 3-52

3.6.37 Signal Configuration – CD-ROM Audio Input Connector (J5) .................................. 3-52

3.6.38 Auxiliary Power Connector (PWR1) ......................................................................... 3-53

3.6.39 Power Connector (PWR2)........................................................................................ 3-53

3.6.40 LCD Backlight Brightness Adjustment Connector (VR1).......................................... 3-53

4. AWARD BIOS SETUP ..........................................................................................4-54

4.1 Starting Setup ...................................................................................................4-54

4.2 Using Setup.......................................................................................................4-55

4.3 Getting Help ......................................................................................................4-55

4.4 In Case of Problems .........................................................................................4-55

4.5 Main Menu .........................................................................................................4-56

4.5.1 Setup Items .............................................................................................................. 4-56

4.5.2 Standard CMOS Setup............................................................................................. 4-58

4.5.3 BIOS Features Setup ............................................................................................... 4-61

4.5.4 Supervisor/User Password Setting........................................................................... 4-66

4.5.5 Chipset Setup........................................................................................................... 4-67

4.5.6 Integrated Peripherals Features Setup .................................................................... 4-68

4.5.7 Power Management Setup....................................................................................... 4-72

4.5.8 PnP/PCI Configuration Setup................................................................................... 4-75

User’s Manual

BCM Advanced Research 8

5. DRIVER INSTALLATION ......................................................................................5-77

5.1 Driver installation for Ethernet Adapter..........................................................5-77

5.1.1 Windows 9x .............................................................................................................. 5-77

5.1.2 Windows NT 4.0 Ethernet Installation ...................................................................... 5-81

5.2 Driver Installation for Display Adapter............................................................5-86

5.2.1 Windows 9x .............................................................................................................. 5-86

5.2.2 Windows NT 4.0 Display Installation ........................................................................ 5-91

5.3 Driver Installation for Audio Adapter ..............................................................5-95

5.3.1 Windows 9x .............................................................................................................. 5-95

5.3.2 Windows NT 4.0 Audio Installation......................................................................... 5-104

6. MEASUREMENT DRAWING ..............................................................................6-108

APPENDIX A: BIOS REVISIONS ................................................................................6-109

APPENDIX B: SYSTEM RESOURCES .......................................................................6-110

Memory Map........................................................................................................................ 6-110

I/O – Map............................................................................................................................. 6-111

Interrupt Usage.................................................................................................................... 6-112

DMA-channel Usage ........................................................................................................... 6-113

APPENDIX C: PROGRAMMING THE WATCHDOG TIMER .......................................6-114

Introduction.......................................................................................................................... 6-114

Configure Register .............................................................................................................. 6-114

Programming Watchdog Timer............................................................................................ 6-115

Demo Program 1 (Micro-Assembly Language) ................................................................... 6-116

Demo Program 2 (C Language) .......................................................................................... 6-119

APPENDIX D: AWARD BIOS ERROR MESSAGE......................................................6-121

Beep 6-121

BIOS ROM Checksum Error – System Halted .................................................................... 6-121

CMOS Battery Failed........................................................................................................... 6-121

CMOS Checksum Error – Defaults Loaded......................................................................... 6-121

CPU at nnnn........................................................................................................................ 6-121

Display Switch Is Set Incorrectly. ........................................................................................ 6-121

Press ESC to Skip Memory Test......................................................................................... 6-121

Floppy Disk(s) Fail............................................................................................................... 6-122

Hard Disk(s) Initializing; Please Wait a Moment... .............................................................. 6-122

Hard Disk(s) Install Failure .................................................................................................. 6-122

Hard Disk(s) Diagnosis Fail................................................................................................. 6-122

Keyboard Error or No Keyboard Present............................................................................. 6-122

Keyboard Is Locked Out – Unlock The Key......................................................................... 6-122

Memory Test........................................................................................................................ 6-122

Memory Test Fail................................................................................................................. 6-122

Override Enabled – Defaults Loaded .................................................................................. 6-122

Press TAB to Show POST Screen ...................................................................................... 6-123

Primary Master Hard Disk Fail............................................................................................. 6-123

Primary Slave Hard Disk Fail............................................................................................... 6-123

Resuming from Disk, Press TAB to Show POST Screen.................................................... 6-123

Secondary Master Hard Disk Fail........................................................................................ 6-123

Secondary Slave Hard Disk Fail.......................................................................................... 6-123

EBC-3410

BCM Advanced Research 9

Proprietary Notice and Disclaimer....................................................................................... 6-123

APPENDIX E: AWARD BIOS POST CODES ..............................................................6-124

APPENDIX F: AUDIO / USB DAUGHTER BOARD USER’S GUIDE ..........................6-128

Jumper & Connector Layout...................................................................................6-128

Jumper & Connector List........................................................................................6-128

Measurement Drawing.............................................................................................6-129

Inhaltsverzeichnis

Andere BCM Hauptplatine Handbücher

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung