Beam SatDOCK RST980 Bedienungsanleitung

SatDOCK

RST980

Installation

& User Manual

Suitable for the

Iridium 9505A

Portable Satellite Telephone

RST980 Installation & User Manual

Beam Communications Pty. Ltd.

SatDOCK

RST980

Installation and User

Manual

Version 3

BEAM Communications Pty Ltd

8 Anzed Court, Mulgrave,

Victoria, 3170, AUSTRALIA

Information furnished by BEAM Communications Pty Ltd (BEAM) is believed to be accurate and

reliable. However, no responsibility is assumed by BEAM for its use, or for any infringement of patents

or other rights of third parties, which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of BEAM. BEAM reserves the right to change

specifications at any time without notice.

Product name: RST980 SatDOCK

Manual revision: 03

Part Number: USRMAN003203

Release date: June 2008

RST980 Installation & User Manual

Package Contents

Check that your RST980 SatDOCK package contains:

1 x RST980 SatDOCK Docking Station

1 x Hands Free Interface (HFI) module

1 x Speaker

1 x Microphone

1 x Interface Cable (from HFI to SatDOCK)

1 x 3-wire Power cable harness / 2 Fuses

1 x “Iridium Antenna Guide” (printed)

1 x RAM bracket

1 x SMA / TNC Adapter

2 x M4 Screws

Optional Accessories

The following optional accessories are available for your RST980.

•Intelligent handset (uses RJ45 port)

•Antenna Cable

•Antenna

See your Service Provider for pricing and availability of these quality BEAM

accessories.

RST980 Installation & User Manual

User information

"Please record your serial number here for future reference:

Model: RST980

Serial no.: #

This number can be copied from the white label on the SatDOCK

Eg. 100A2800

RST980 Installation & User Manual

Contents

Package Contents .....................................................................................................3

User information........................................................................................................4

Safety Information.....................................................................................................6

About BEAM Communications...............................................................................10

About this equipment..............................................................................................11

Installation Guidelines ............................................................................................14

Installation Procedure................................................................................................15

Wiring for Additional Features ...................................................................................22

Using the Communication Port..............................................................................28

RS232 Data Port .......................................................................................................28

Using the Line In/Out.................................................................................................29

Connecting an Intelligent Handset (Optional)............................................................30

Power-On Messages.................................................................................................32

Assuring Quality of Iridium Service.......................................................................33

Specification Summary...........................................................................................35

Cradle Mounting DimensionsTroubleshooting.....................................................37

Troubleshooting ......................................................................................................38

RST980 Installation & User Manual

Safety Information

Note:

Read the following information before installing and using the BEAM

RST980 SatDOCK.

Your RST980 is a low power docking station for the 9505A handset; when ON, it will

charge the 9505A handset whilst docked in the RST980.

The design of your RST980 system complies with international safety standards.

Refer to the appropriate section of this RST980 Installation & User Manual for

additional safety information.

Warning:

Do not open equipment. There are no user-serviceable parts inside.

If a DC power supply is to be used, its output must comply with the

Safety Extra Low Voltage (SELV) requirements of IEC60950.

All connectors except the Line and Accessory sockets must only be

connected to equipment ports which comply with the Safety Extra Low

Voltage (SELV) requirements of IEC60950.”

Conventions in this Manual

Warnings, cautions and notes appear throughout this manual and are represented by

following conventions.

Warning: This symbol and associated text indicate a warning

note providing information to prevent personal injury or damage

to equipment.

Note: This symbol and associated text indicate a note providing

general operating information.

Interference: All wireless phones may get interference, which

could affect performance.

"Record: Write details of your unit for easy reference when

required. Ideal when troubleshooting.

RST980 Installation & User Manual

Exposure to Radio Frequency Signals

Your wireless mobile telephone is a low power radio transmitter and receiver. When it

is ON, it receives and also sends out radio frequency (RF) signals.

International agencies have set standards and recommendations for the protection of

public exposure to RF electromagnetic energy.

•International Commission on Non-Ionizing Radiation Protection (ICNIRP)

1996

•Verband Deutscher Elektrotechniker (VDE) DIN-0848

•United States Federal Commission, Radio Frequency Exposure Guidelines

(1996)

•National Radiological Protection Board of the United Kingdom, GS 11, 1988

•American National Standards Institute (ANSI) IEEE. C95. 1-1992

These standards are based on extensive scientific review. For example, over 120

scientists, engineers, and physicians from universities, government health agencies,

and industry reviewed the available body of research to develop the updated ANSI

standard.

Antenna Care

Use only the supplied or an approved replacement antenna. Unauthorized antennas,

modifications, or attachments could damage the phone and may violate local agency

regulations. Please refer to your Service Provider for further information.

Phone Operation

Do not operate your mobile telephone when a person is within 4 inches (10 cm) of the

antenna. A person or object within 4 inches (10 cm) of the antenna could impair call

quality and may cause the phone to operate at a higher power level than necessary

and expose that person to RF energy in excess of that established by the FCC RF

Exposure Guidelines.

Driving

Check the laws and regulations on the use of wireless telephones in the areas where

you drive. Always obey them. Observe the following guidelines when using your

phone while driving.

¾Give full attention to driving—driving safely is your first responsibility.

¾Use hands-free phone operation, as provided by this kit

¾Turn off the road and park before making or answering a call if driving conditions

so require.

RST980 Installation & User Manual

Electronic Devices

Most modern electronic equipment is shielded from RF signals. However, certain

equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum

separation of six inches (6") be maintained between a wireless phone’s antenna and

a pacemaker to avoid potential interference with the pacemaker. These

recommendations are consistent with the independent research by and

recommendations of Wireless Technology Research.

Persons with pacemakers:

¾Should ALWAYS keep the phone more than six inches from their pacemaker

when phone is turned ON

¾Should turn the phone OFF immediately if you have any reason to suspect

interference is taking place

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device

to determine if it is adequately shielded from external RF energy. Your physician may

be able to assist you in obtaining this information.

Turn your phone OFF in health care facilities when any regulations posted in these

areas instruct you to do so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles. Check with the manufacturer or its representative

regarding your vehicle. You should also consult the manufacturer of any equipment

that has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted notices require.

Aircraft

Airline regulations prohibit using your phone while in the air. Consult the local

Aviation Authority for guidelines on use of the equipment on board an aircraft.

RST980 Installation & User Manual

Potentially Explosive Atmospheres

¾Turn your phone OFF and do not remove your battery when you are in any area

with a potentially explosive atmosphere.

¾Obey all signs and instructions.

¾Sparks from your battery in such areas could cause an explosion or fire resulting

in bodily injury or even death.

¾Areas with a potentially explosive atmosphere are often but not always clearly

marked. They include, but are not limited to:

ofueling areas such as gasoline stations;

obelow deck on boats;

ofuel or chemical transfer or storage facilities;

oareas where fuel odors are present (for example, if a gas/propane

leak occurs in a car or home);

oareas where the air contains chemicals or particles, such as grain,

dust, or metal powders;

oany other area where you normally would be advised to turn off your

vehicle engine.

For Vehicles Equipped with an Air Bag

An air bag inflates with great force.

Do NOT place objects, including both installed or portable wireless equipment, in the

area over the air bag or in the air bag deployment area.

If in-vehicle wireless equipment is improperly installed and the air bag inflates,

serious injury could result.

RST980 Installation & User Manual

About BEAM Communications

BEAM Communications, is an authorised manufacturer of Iridium Satellite products.

BEAM develops subscriber products that utilise the Iridium satellite network of Low

Earth Orbit satellites, known as LEOs. The Iridium network is extensively used

around the world by commercial enterprises and defence agencies.

BEAM products address the needs of individuals, communities, government agencies

and the corporate sector, providing voice and data access without the need for

traditional wire-line or mobile phone infrastructure.

As the Iridium satellite network is global, BEAM products address global markets,

across the spectrum of rural and remote users, including households, motor vehicles,

telemetry, maritime and emergency services.

BEAM Communications Pty Ltd

8 Anzed Court, Mulgrave,

Victoria, 3170, AUSTRALIA

Web: www.beamcommunications.com

Info: [email protected]

Support: [email protected]

Tel: +61 3 8851 0400

Fax: +61 3 9560 9055

Andere Handbücher für SatDOCK RST980

Inhaltsverzeichnis

Andere Beam Dockingstation Handbücher

Beam

Beam IsatDock MARINE Bedienungsanleitung

Beam

Beam IntelliDOCK RST310 Bedienungsanleitung

Beam

Beam IsatDock LITE Bedienungsanleitung

Beam

Beam isatdock2 lite Bedienungsanleitung

Beam

Beam iridium IntelliDOCK 9555 Bedienungsanleitung

Beam

Beam Iridium SatDOCK 9555 Bedienungsanleitung

Beam

Beam Iridium SatDOCK 9555 Bedienungsanleitung

Beam

Beam IntelliDOCK RST310 Bedienungsanleitung

Beam

Beam Inmarsat IsatDock2 PRO Bedienungsanleitung

Beam

Beam IsatDock2 MARINE Bedienungsanleitung

Beam

Beam PotsDOCK 9555 Bedienungsanleitung

Beam

Beam IsatDock DRIVE Bedienungsanleitung

Beam

Beam PotsDOCK 9555 Bedienungsanleitung

Beam

Beam isatdock2 lite Bedienungsanleitung

Beam

Beam PotsDOCK 9555 Bedienungsanleitung

Beam

Beam iridium SatDOCK-G 9555 Bedienungsanleitung

Beam

Beam IsatDock2 PRO Bedienungsanleitung

Beam

Beam IsatDock2 MARINE Bedienungsanleitung

Beam

Beam IsatDock LITE Bedienungsanleitung

Beam

Beam DriveDOCKExtreme Bedienungsanleitung

Beam

Beam SatDOCK RST980 Bedienungsanleitung

Beam

Beam isatdock2 lite Bedienungsanleitung

Beam

Beam IntelliDOCK RST310 Bedienungsanleitung

Beam

Beam IsatDock DRIVE Bedienungsanleitung

Beliebte Dockingstation Handbücher anderer Marken

Sony

Sony Dream Machine XDR-DS12iP Bedienungsanleitung

ATEN

ATEN UC-2000 Bedienungsanleitung

Xcellon

Xcellon HDD-202 Bedienungsanleitung

Dok

Dok CR09 Bedienungsanleitung

Philips

Philips BTM630/12 Bedienungsanleitung

IOGear

IOGear Travel Pro GUD3C09 Bedienungsanleitung

RKI

RKI SDM-E2 Bedienungsanleitung

iHome

iHome iP15 Bedienungsanleitung

VITURE ONE

VITURE ONE MOBILE DOCK Bedienungsanleitung

Lindy

Lindy 42984 Bedienungsanleitung

CipherLab

CipherLab 8001 Bedienungsanleitung

Pyle

Pyle PIPDSP2 Bedienungsanleitung

Avol

Avol AS2350 Bedienungsanleitung

Datalogic

Datalogic JoyaTouch Bedienungsanleitung

Targus

Targus DOCK315EUZ Bedienungsanleitung

Philips

Philips DC190/79 Bedienungsanleitung

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUBX2082808a Bedienungsanleitung