Beamz SLIMPAR 30W Bedienungsanleitung

Inhaltsverzeichnis

Andere Beamz DJ-Equipment Handbücher

Beamz

Beamz illusion 2 Bedienungsanleitung

Beamz

Beamz LCB144 Bedienungsanleitung

Beamz

Beamz 151.347 V1.2 Bedienungsanleitung

Beamz

Beamz PS10W LED Pin Spot 10W RGBW DMX Bedienungsanleitung

Beamz

Beamz MHL810 Bedienungsanleitung

Beamz

Beamz 150.579 V1.1 Bedienungsanleitung

Beamz

Beamz LCB-24 Bedienungsanleitung

Beamz

Beamz LED 24 Butterfly 3 x 3W RGB Bedienungsanleitung

Beamz

Beamz KUBE20 Bedienungsanleitung

Beamz

Beamz PS40Z SPOT ZOOM Bedienungsanleitung

Beamz

Beamz 150.382 V1.3 Bedienungsanleitung

Beamz

Beamz 160.571 Bedienungsanleitung

Beamz

Beamz Magic 1 Bedienungsanleitung

Beamz

Beamz SLIMPAR 37 Bedienungsanleitung

Beamz

Beamz Magic 2 Bedienungsanleitung

Beamz

Beamz BUV463 Bedienungsanleitung

Beamz

Beamz LED FlatPAR 7 x 18W 6-1 RGBAW UV IR Bedienungsanleitung

Beamz

Beamz PS6WB Bedienungsanleitung

Beamz

Beamz SnowW1800 Bedienungsanleitung

Beamz

Beamz 160.569 Bedienungsanleitung

Beamz

Beamz PANTHER 70 Bedienungsanleitung

Beamz

Beamz Snow900 Bedienungsanleitung

Beamz

Beamz LCB300 Bedienungsanleitung

Beamz

Beamz BT410 PAR Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung

SLIMPAR 30W

150.903 V1

Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present,

and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear

damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product

must be returned to the factory, it is important that the product be returned in the original factory box and packing.

If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation

water might damage your unit. Leave the unit switched off until it has reached room temperature.

On the label on the backside of the unit is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to

this, all other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and

may be used. No dimmer or adjustable power supply.

Always connect the unit to a protected circuit (circuit breaker or fuse). Make sure the unit has an appropriate electrical ground

to avoid the risk of electrocution or fire.

The unit may be set up on a stable and even surface. By means of the fixing facilities of the baseplate, the unit can also be mounted upside down to

a truss, see below picture. For fixing, certified clamps with correct save working load are required. According to the figure, the quick lock bolts of

the omega brackets are placed into the openings provided in the base plate and turned clockwise until they lock (to the stop). The mounting place

must be of sufficient stability and be able to support a weight of 10 times of the unit’s weight. Secure the unit with a safety cable so that it cannot

fall down.

When carrying out any installation, always comply European and national guidelines concerning rigging, truss and all other safety issues. Always let

the installation checked out by an authorized dealer !

Press off existing modes. Press return the last modes.

Automatic mode will enable you to run the automatic programs on the product.

To turn on Automatic mode:

1. Press on the remote controller.

2. Press or to choose between the different auto programs.

Sound-Active mode will enable the product to respond to the music.

To turn on Sound-Active mode:

1. Press on the remote controller.

2. Press or to choose between the different sound programs.

To adjust the strobe speed of the automatic program and the sound active program.

1. Press on the remote controller.

2. Press or to either increase or decrease the speed of the program.

3. Press again to turn off the strobe.

To adjust the speed of the automatic program and the sound active program.

1. Press on the remote controller.

2. Press or to either increase or decrease the speed of the program.

To adjust sound sensitivity for in Sound-Active mode

1. Press on the remote controller.

2. Press or to either increase or decrease sound sensitivity.

To enable DMX or disallow DMX on the product.

Press on the remote controller, the product work on the DMX controlling modes.

1. Press on the remote controller.

2. Press , , (cool white, warm white or UV) to choose your colour.

3. Press again , , (cool white, warm white or UV) to close your colour.

4. Press or to either increase or decrease the percentage of each colour.

To adjust the FADE speed of the automatic program, the sound active program and the manual mode.

1. Press on the remote controller.

2. Press again to turn off the Fade mode.

To adjust the brightness value of the automatic program, the Sound active program and Manual Mode.

Press digit to to change different brightness on the device.

The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery contacts

prevents the battery from being discharged during storage. Prior to the first operation remove the foil from the battery support on the

rear side of the remote control. Otherwise operation of the remote control is not possible.

If the range of the remote control decreases, replace the battery. For this purpose, on the rear side of the

remote control press the small bar with the groove to the right (1) and at the same time remove the battery

support (2). For operation, one 3 V button cell type CR 2025 is required. When inserting, pay attention that the

positive pole of the button cell shows upwards in the support.