STROLLER ASSEMBLY INSTRUCTIONS EN
1. To unfold the frame of the stroller,
hold the handle bar and li the frame
upwards. The frame will automacally
unfold and a “click” sound ensures
that it is locked in place.
2. To install the wheels, insert the
wheels in the corresponding holes
unl you hear a “click” sound.
To remove the wheels, first push the
removal buon (RB) as shown in the
pictures and pull the wheels out.
3. To install the protecon bar, insert
the brackets into the corresponding
holes on the stroller seat unl you
hear a “click” sound. To remove it,
press the removal buons (RB) on
each side and pull.
4. The seat unit can be fied both
forward and backward facing. Hold
the seat unit and align the brackets
with the frame’s inseron clips. Push
down in both sides unl you hear a
“click” sound. To remove, pull the
removal buons (RB) from each side
and pull upwards.
8
INSTRUCTIONS FOR USE EN
1. To adjust the backrest, pull and hold
the adjustment lever and move the
backrest to the desired posion.
2. There is an extension part in the
middle of the canopy for extra venlaon
that you can open with the zipper.
3. To fasten the 5 point belt system, place
the (b) part of the buckle over the (a) part
first, a magnet will hold both parts in
place. Then place the (c) part over the
other two, a magnet will hold all parts in
place. To unfasten the belt, press both
buons on the buckle and it will
automacally release. Adjust the height
of the shoulder belts using the holes on
the backrest, the straps must be on the
same height as the child’s shoulders.
Adjust the length of the belts using the
adjustment ring.
4. To adjust the angle of the footrest,
press the footrest adjustment buons
(FA) on both sides and lt the footrest to
the desired posion.
5. To adjust the height of the handle
bar, pull the two buons and adjust
the handlebar onto your desired
posion.
6. A. Push the buon located over the
front wheels to lock/unlock rotaon.
B. Step on the brake located between
the rear wheels to park the stroller. Li
the brake to release the wheels.
7. To fold the stroller, while the seat is
in the forward posion, first fold the
canopy, then hold the brake, pull the
two folding buons in both sides, raise
the stroller and it will automacally
fold.
8. To fold the stroller while the seat is
in backwards facing posion, first fold
the canopy, then hold the brake, pull
the two folding buons in both sides,
r a i s e t h e s t r o l l e r a n d i t w i l l
automacally fold.
