2
Getting Started
Video Intercom Systems (Cat-5)
Congratulations on your new Video Intercom System! At BEC Integrated Solutions, we are proud to provide
secure, reliable solutions for your home or business. This manual is to help to answer any operational questions
you might have throughout your system’s lifetime.
Door Entry
The door panel included with your system should have been installed and
programmed to ring upon entering an apartment/unit number using
the pin-pad (Ex. 101, 203, etc.). Once entered, the unit will ring until
answered at the respective room station. When answered, speak as
you would normally.
By default the call time is 45 seconds. Press any button to extend the call
length.
The person at the indoor station may press the unlock key during the call to
grant entry. Press the ‘#’ sign to cancel a call or any action at any
time.
To gain entry to the building using the RF Reader, swipe the key fob or key
card given by the owner in front of the reader and the door will
click open.
To gain entry to the building using the Public Access Code (provided by the
installer/owner) Press 9* then enter the public password
(by default the code is 8888) (Ex. 9* 8888)
To gain entry to the building using the Residential Access Code (provided by
the installer/owner, this code
can
be changed) Press 8*, enter the room number, then the
assigned password (Ex. For room 101, with password ‘1234’, Press 8* + 0101 + 1234).
To CHANGE your Residential Access Code, press 5*, enter the room number, type the original
password, then type your new password. (Ex. For room 101, Press 5* + 0101 + 1234 + 4321)
