BEC 9900VA Bedienungsanleitung

BEC 9900VA

Active Ethernet Fiber

802.11ac Gateway with VoIP

Quick Start Guide

BEC 9900VA Active Ethernet Fiber 802.11ac Gateway with VoIP

Package Contents

✓BEC 9900VAActive Ethernet Router * 1

✓This Quick Start Guide * 1

✓RJ-45 Ethernet Cable * 1

✓Dual-Band Wireless Antenna * 6

✓DC Power Adapter * 1

NOTE:ALL IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY.

PACKAGE CONTENTS MAY DIFFER FROM ACTUAL PRODUCTS.

Warning

⚫Do not use the router in high humidity or at high temperature.

⚫Do not use the same power source for the router as other equipment.

⚫Do not open or repair the case yourself. If the router is too hot, turn off

the power immediately and have it repaired at a qualified service center.

⚫Avoid using this product and all accessories outdoors.

Attention

⚫Place the router on a stable surface.

⚫Only use the power adapter that comes with the package. Using a

different voltage rating power adapter may damage the router.

PLEASE READ THE QUICK START GUIDE AND FOLLOW THE

STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU

INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE.

IF YOU NEED MORE INFORMATION ON THIS SOFTWARE

CONFIGURATION, PLEASE REFER TO THE ONLINE USER

MANUAL.

Quick Start Guide

Front Panel LEDs

LED

STATUS

DESCRIPTION

Power

Green

System is up and ready

Red

System failure

SFP

Green

SFP fiber connection is ready

Gigabit

LAN1 / EWAN

Interchangeable LAN/WAN Ethernet –WAN management & configuration via GUI

Green

(Default) Ethernet LAN: Connected with a gigabit Ethernet device.

(Configured via GUI) Ethernet WAN: Successfully connected with a

broadband device, e.g. ADSL / VDSL / Cable Modem / FTTH router/modem.

Orange

LAN port is connected with a 10/100Mbps Ethernet device

Blinking

Data is being transmitted/received

Off

No device is connected to the Ethernet port

Ethernet Port

LAN 2 - 3

Green

Transmission speed is at Gigabit speed (1000Mbps)

Orange

Transmission speed is at 10/100Mbps

Blinking

Data is being transmitted/received

USB

Green

Connected with a USB dongle or a hard drive.

Wireless

2.4GHz / 5GHz

Green

Wi-Fi connection is established

Blinking

Data is being transmitted / received

Off

Wi-Fi connection is turned off

WPS

Green

Wireless device(s) is connected successfully via WPS mode

Blinking

WPS is enabled and trying to establish a WPS connection

Off

WPS is turned off

Phone

Green

Successfully registered and ready to use.

Orange

Phone is off-hook, in-use.

Internet

Green

IP address has received, and traffic is passing thru the device.

Red

IP address request has failed.

BEC 9900VA Active Ethernet Fiber 802.11ac Gateway with VoIP

Rear Panel Connectors

INTERFACE

MEANING

Wi-Fi Antenna

Connectors

Female RP-SMA connectors, total of 6.

Manually screw the dual-band Wi-Fi antennas tight to each connector.

Power

Power on/off button.

Power Jack

(DC IN)

Connect the supplied power adapter to this jack.

SFP

Insert and gently push a 1000Base SFP module until it snaps into the slot tightly.

Gigabit Ethernet

(LAN 1 - 3)

Connect an Ethernet cable (Cat-5 or Cat-5e) to one of the LAN ports with a 10Mbps

/100Mbps /1000Mbps PC or an office/home network device.

* 1/EWAN

Connect to Fiber/ Cable/ xDSL Modem with a RJ-45 cable for broadband connectivity.

Note: LAN 1 automatically becomes an EWAN port when ETH WAN interface is selected

and configured in the GUI.

USB

Connect with a USB hard drive for storage/file sharing.

Reset

After the device is powered on, press it 6 seconds or above: to restore to factory

default settings (this is used when you cannot login to the router, e.g. forgot your

password).

WPS &

Wi-Fi On/Off

By controlling the pressing time, users can achieve two different effects:

(1) WPS*: Press &hold the button for 2 seconds to trigger WPS function.

(2) Wireless ON/OFF button: Press & hold the button for more than 6 seconds to turn

on/off the wireless.

* For WPS configuration, please refer to the WPS section in the User Manual.

FXS Ports (1-2)

Connect your analog phone(s) to the FXS port(s) with RJ-11 cable(s).

Quick Start Guide

Application Diagram

Hardware Installation

1. Power Connection

Plug in the supplied power adapter to the wall jack, the other side to the BEC 9900VA then

power it ON the by pressing the Power on/off button.

BEC 9900VA Active Ethernet Fiber 802.11ac Gateway with VoIP

2. LAN Connection

Plug the RJ-45 Ethernet cable to one of the Ethernet ports, and the other side to the any

network devise’s Ethernet port.

3. WAN Link Interface and Connection

BEC 9900VA supports failover and failback to another WAN interface, SFP or Ethernet

WAN. <Please refer to user manual for detailed setup>

3.1 Ethernet WAN Connection

Connect RJ-45 Ethernet cable to the WAN port and connect the other side to another

alternative broadband device, such as Cable Modem, VDSL, Fiber Modem or PON optic

line.

Quick Start Guide

3.2 SFP Connection

Insert then gently push the Mini-GBIC SFP module into the SFP cage until it us tightly

locked to the cage, and then connect the fiber cable to the module.

4. Phone Connection

Connect RJ-11 cable(s) to Phone1 and/or Phone2 to analog phone. Go to 9900VA web

GUI to setup your VoIP account(s). You can place VoIP calls simultaneously once

registered with a VoIP service.

BEC 9900VA Active Ethernet Fiber 802.11ac Gateway with VoIP

5. USB Connection

FTP or Samba Server attached to the USB port. Simply plug in an external USB HD and do

a setup in the web GUI. <Please refer to User Manual for detailed instruction.>

Quick Start Guide

Connecting to the Router

The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the attached

PC to this router is in the same subnet and has an IP address in the range between 192.168.1.1

~ 192.168.1.253.

Open a web browser and type http://192.168.1.254 in the URL address bar.

The login prompt will appear. Input the default username and password.

*This username / password may vary by different Internet Service Providers.

Quick Setup Your Router

Use the Quick Start for fast connection setup.

Step 1: Change administration password

Setup a new password for “admin” account for device management. The default password is

“admin”. Click Continue to go on to the next step.

*The password may vary by different Internet Service Providers.

Step 2: Time Zone configuration

Enable and select your Time Zone then click Continue to go on to the next step.

URL Address bar: type

http://192.168.1.254

Time Zone: select your time zone

Next Step: click Next

For Wired Broadband Connection (Ethernet WAN) - Before start configuring the

device, make sure you connect the 9900VA with your primary router.

New Password: assign a new,

unique password

Confirm Password: re-enter the

new password again

Next Step: click Next

Andere Handbücher für 9900VA

Inhaltsverzeichnis

Andere BEC Tor Handbücher

BEC

BEC 9900VA Bedienungsanleitung

BEC

BEC MX-240 Bedienungsanleitung

BEC

BEC 9800VN Bedienungsanleitung

BEC

BEC 8920M Bedienungsanleitung

BEC

BEC Ultimum 8900AX Bedienungsanleitung

BEC

BEC 8920AC Bedienungsanleitung

BEC

BEC 8920AC Bedienungsanleitung

BEC

BEC 8920NE Ultimum Bedienungsanleitung

BEC

BEC 8920NE Ultimum Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung