BEC 6300VNL Bedienungsanleitung

Version 1.2

BEC 6300VNL

GigaConnect®

4G/LTE VoIP Wireless Broadband

Router

Quick Start Guide

BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router

Package Contents

BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router

This Quick Start Guide

CD containing the user manual

RJ-45 Ethernet cable

Two 4G/LTE detachable antennas

Power adapter



Warning

Do not use the router in high humidity or high temperatures.

Do not use the same power source for the router as other equipment.

Do not open or repair the case yourself. If the router is too hot, turn off

the power immediately and have it repaired at a qualified service center.

Avoid using this product and all accessories outdoors.

Attention

Place the router on a stable surface.

Only use the power adapter that comes with the package. Using a

different voltage rating power adaptor may damage the router.

PLEASE READ THE QUICK START GUIDE AND FOLLOW THE

STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU

INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE.

IF YOU NEED MORE INFORMATION ON THIS SOFTWARE

CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON

CD-ROM.

Quick Start Guide

Front Panel LEDs

LED

STATUS

DESCRIPTION

Power

Green

System is up and ready

Red

Boot failure

Battery

Green

UPS is functional properly

Orange

UPS battery failure. Need to replace a new battery

Orange blinking

UPS AC power failure and battery functional properly

Off

Device powered by the DC power adaptor

EWAN

Lit up

BEC 6300VNL is successfully connected with a broadband connection device.

Green

Transmission speed is at Gigabit speed (1000Mbps)

Orange

Transmission speed is at 10/100Mbps

Blinking

Data being transmitted/received

Ethernet Port

LAN 1 ~ 3

Green

Transmission speed is at Gigabit speed (1000Mbps)

Orange

Transmission speed is at 10/100Mbps

Blinking

Data being transmitted/received

USB

Green

Connecting to a USB dongle or a hard drive.

Wireless/WPS

Green

Wireless connection established

Green blinking

Data being transmitted / received

Orange

WPS configuration is in progress

Phone

Green

Successfully registered and ready to be used.

Orange

Phone is off-hook, in-use

LTE

(Received

Signal

Strength

Indicator)

Green

RSSI greater than -69 dBm. Excellent signal condition

Green

Flashing quickly

RSSI from -81 to -69 dBm. Good signal condition

Orange

Flashing quickly

RSSI from -99 to -81 dBm. Fair signal condition.

Orange

Flashing slowly

RSSI less than -99 dBm. Poor signal condition.

Orange

No signal and the 4G_LTE module is in service

Off

No LTE module or LTE module fails

Internet

Green

IP connected and traffic is passing thru the device.

Red

IP request failed.

Off

BEC 6300VNL is either in bridged mode or WAN connection not ready.

BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router

Rear Panel Connectors

* Note: 1. For WPS configuration, please refer to the WPS section in the User Manual.

PORT

MEANING

LTE Antenna

Screw the supplied LTE antennas onto the antenna connectors on both sides.

SIM Card Slot

Insert the mini SIM card (2FF) with the gold contact facing down.

Push the mini SIM card (2FF) inwards to eject it

Phone (1X-2X)

Connect your analog phone to this port with a RJ-11 cable.

USB

The USB can either setup for 3G/4G LTE internet access or storage/file sharing.

(1) For File Sharing: Connect an external USB dongle / hard drive for storage,

network sharing, etc

(2) For 3G/4G LTE Internet Connection: Connect with an external USB 3G/4G

LTE modem or dongle with an activate data plan (internet access).

Gigabit

LAN Ethernet

(1~3)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when

connecting to a PC or an office/home network of 10Mbps /100Mbps /1000Mbps

Gigabit EWAN

Connect to Fiber/ Cable/ xDSL Modem with a RJ-45 cable

UPS Jack

The 4-pin connectors are used to power the device with an external UPS battery

backup.

Reset

After the device is powered on, press it 6 seconds or above: to restore to factory

default settings (this is used when you cannot login to the router, e.g. forgot your

password)

WPS &

Wireless

On/Off

By controlling the pressing time, users can achieve two different effects:

(1) WPS*1: Press &hold the button for less than 6 seconds to trigger WPS function.

(2) Wireless ON/OFF button: Press & hold the button for more than 6 seconds to

On/Off the wireless.

Power Jack

(DC)

Connect the supplied Power Adapter to this jack.

Power Source

Power ON/OFF switch

(1) with Power Switch ON: power up by the supplied DC power adaptor

(2) with Power Switch OFF: power up by the UPS battery unit

Quick Start Guide

Hardware Connection

Hardware Installation

1. Power Connection

Select power source from using a (1) DC power adapter or (2) UPS (Uninterruptible Power

Supply)

1.1 Using the Supplied DC Power Adaptor

Plug in the supplied power adapter to the wall jack, the other side to the 6300VNL then

power ON the 6300VNL by pressing the Power On/Off button.

BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router

1.2 Using a UPS Battery Unit

Power OFF the power source button and plug the uninterruptible power supply (UPS) to

the device; it’s an electrical apparatus that can provide emergency power when the main

power source fails. <Please refer to User Manual for detail instruction.>

2. LAN Connection

Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other side

to the PC’s Ethernet interface.

3. WAN Link Interface and Connection

BEC 6300VNL supports failover and fallback on multiple WAN interfaces, 4G LTE, EWAN

and USB 3G/4G_LTE. <Please refer to User Manual for detailed Internet setup>

3.1 4G_LTE Connection

Slide the SIM card into the card slot of the device with the gold contact facing down. Make

sure that the SIM card has been slid into the bottom of the slot with a click. When removing

the SIM card, press the SIM card again it will be ejected from the card slot.

WARNING: Please power off the device before inserting or removing the SIM

card.

Quick Start Guide

3.2 EWAN Connection

Connect RJ-45 Ethernet cable to the EWAN port, and connect the other side to another

alternative broadband device, such as Cable Modem, VDSL, Fiber Modem or PON optic

lines.

3.3 USB 3G/4G_LTE Connection

Connect a USB 3G/4G LTE dongle or modem with an activate data plan to the USB port.

4. USB for Network File Sharing

BEC 6300VNL has built-in FTP and Samba Servers, Simply plug in an external USB HD

then follow the instruction setup in the User Guide.

BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router

6. Phone Connection

Connect RJ-11 cable to the router’s “Phone 1” or “Phone 2” when connecting to an analog

phone set. Both ports (“Phone 1” and “Phone 2”) can make VoIP calls simultaneously. But

only one phone is allowed to make PSTN call at the same time.

Quick Start Guide

Connecting to the Router

The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the attached

PC to this router is in the same subnet and has an IP address in the range between 192.168.1.1

~ 192.168.1.253.

Open a web browser and type http://192.168.1.254 in the URL address bar.

The login prompt will appear. Input the default username (admin) and password (admin) for

Account type, Administrator. *This username / password may vary by different Internet Service Providers.

Quick Setup Your Router

Use the Quick Start for fast connection setup.

Step 1: Change administration password

Setup a new password for “admin” account for device management. The default password is

“admin”. Click Continue to go on to the next step.

*The password may vary by different Internet Service Providers.

Step 2: Time Zone configuration

Enable and select your Time Zone then click Continue to go on to the next step.

URL Address bar: type

http://192.168.1.254

Time Zone: select your time zone

Next Step: click Next

Before start configuring the 6300VNL, make sure you have the WAN port connected

with your Internet box or fiber line.

New Password: assign a new,

unique password

Confirm Password: re-enter the

new password again

Next Step: click Next

Andere Handbücher für 6300VNL

Inhaltsverzeichnis

Andere BEC WLAN-Router Handbücher

BEC

BEC 6300VNL Bedienungsanleitung

BEC

BEC 6300VNL Bedienungsanleitung

BEC

BEC MX-210NPV Bedienungsanleitung

BEC

BEC RidgeWave BEC 7000 R25 Bedienungsanleitung

BEC

BEC 430M Bedienungsanleitung

BEC

BEC 6200WZL Betriebsanleitung

BEC

BEC RidgeWave 6900 Bedienungsanleitung

BEC

BEC BEC 6900 R21 Bedienungsanleitung

BEC

BEC BEC 6500 Series Bedienungsanleitung

BEC

BEC 6800RUL Bedienungsanleitung

BEC

BEC MX-210NP R7-Q Bedienungsanleitung

BEC

BEC 6300VNL Bedienungsanleitung

BEC

BEC MX-241NP Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

BEC

BEC 6800RUL Bedienungsanleitung

BEC

BEC EG-210N Bedienungsanleitung

BEC

BEC MX-200A ODU Bedienungsanleitung

BEC

BEC 6300VNL Bedienungsanleitung

BEC

BEC MX-1000 Bedienungsanleitung

BEC

BEC MX-210NP Bedienungsanleitung

BEC

BEC M2M MX-200Ae Bedienungsanleitung

BEC

BEC 6600AEL Bedienungsanleitung

BEC

BEC VG2600 Bedienungsanleitung

BEC

BEC BiPAC 6300VNPOZ Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung