Becker Beck-O-Tronic 6 Bedienungsanleitung

BECK-O-TRONIC 6

Version: Centronic

en Assembly and Operating Instructions

Door control unit

Important information for:

• Fitters / • Electricians / • Users

Please forward accordingly!

These instructions must be kept safe for future reference.

Becker-Antriebe GmbH

Friedrich-Ebert-Straße 2-4

35764 Sinn/Germany

www.becker-antriebe.com

4005 630 202 0b09/08/2018

Table of contents

General ................................................................................................................ 3

Warranty .............................................................................................................. 3

Safety instructions ................................................................................................ 4

Intended use ........................................................................................................ 6

Product overview .................................................................................................. 7

Assembly ............................................................................................................. 8

Wiring .................................................................................................................. 9

Operator controls & functions/displays ..................................................................10

Parametrisation ...................................................................................................15

Menu table ..........................................................................................................16

Connections & functions.......................................................................................22

Reset / factory setting ..........................................................................................29

Functional description ..........................................................................................30

Remote control....................................................................................................34

Disposal ..............................................................................................................36

Maintenance .......................................................................................................36

Cleaning..............................................................................................................37

Error messages ...................................................................................................37

Complete connecting diagram ..............................................................................40

Electric safety edge and light barrier connecting diagram........................................41

Safety edge OSE connecting diagram ...................................................................42

Technical data .....................................................................................................42

Declaration of conformity .....................................................................................43

General

This control unit is a high-quality product with many features and advantages:

•Simple, convenient connection

•Easy to handle and highly flexible

•Automatic limit position detection

•Defined buttons for OPEN, STOP and CLOSE, also on the hand-held transmitter

•Design with clear display of operating status and error messages

•Optical safety edge or electric safety edge and additional light barrier can be con-

nected

Please observe these Assembly and Operating Instructions when installing and setting

up the equipment.

Explanation of pictograms

CAUTION CAUTION indicates a hazardous situation

which, if not avoided, could result in injury.

ATTENTION ATTENTION indicates measures that must be

taken to avoid damage to property.

Denotes user tips and other useful information.

Warranty

Structural modifications and incorrect installation which are not in accordance with

these and our other instructions can result in serious injuries, e.g., crushing of limbs.

Therefore, structural modifications may only be carried out with our prior approval and

strictly in accordance with our instructions, particularly the information contained in

these Assembly and Operating Instructions.

Any further processing of the products which does not comply with their intended use is

not permitted.

The end product manufacturer and fitter have to ensure that all the relevant current

statutory, official and, in particular, EMC regulations are adhered to during utilisation of

our products, especially with regard to end product manufacture, installation and cus-

tomer advice.

Safety instructions

The following safety instructions and warnings are intended to avert hazards and to

prevent property damage and personal injury.

Please keep the instruction manual safe!

Caution

•Work on the electrical equipment may only be carried

out by a qualified electrician.

•The relevant safety and accident prevention regulations

for the specific application must be observed when car-

rying out assembly, installation, commissioning, testing

and maintenance of the control unit. The following regu-

lations in particular must be observed (not an exhaustive

list):

- Machinery Directive 2006/42/EC

- EN 12453 (safety in use of power-operated doors, re-

quirements)

- EN 12445 (safety in use of power-operated doors,

testing methods)

- EN 12978 (safety devices for power-operated doors,

requirements and testing methods)

- EN 60335 (safety of electrical devices for household or

similar purposes)

- Fire prevention regulations

- Accident prevention regulations ASR A1.7 (power-op-

erated windows, doors and gates)

•The engineer responsible for fitting the system must en-

sure proper installation, instruction of the operator in its

use and issue of the CE mark.

•The operator must ensure that the system is only oper-

ated in perfect condition and that the safety devices are

checked regularly by an expert to ensure they are in full

working order.

•A damaged mains connecting cable must be replaced

immediately by a qualified electrician.

•If there is no fixed stop, e.g., when using roller doors,

the customer must ensure that the roller shutter curtain

is protected and cannot cause any dangerous situ-

ations, e.g., by overrunning a limit position.

•The control unit is designed to have a service life of

100,000 operating cycles.

•Drives with a H05VV-F connecting cable may only be

used indoors. If the cable is installed outdoors, it must

be placed in a protective conduit.

•The person who installs, connects, commissions and

maintains this control unit must have read, understood

and observed these Assembly and Operating Instruc-

tions. The manufacturer will not accept liability for dam-

age, consequential damage or malfunctions resulting

from non-compliance with these Assembly and Operat-

ing Instructions.

•Before working on the control unit, it must be discon-

nected from the power supply and measures must be

taken to ensure it cannot be inadvertently switched back

on.

•Following installation and commissioning, all users must

receive instruction in the functions and operation of the

system. All users must be briefed on the dangers posed

by the system, as well as the risks and their testing ob-

ligations as users. Documentation of these points is re-

commended.

•Operating personnel who have not received instruction

or children must not operate the door control unit.

•Persons, animals or objects must not be within the

movement range of the door when opening or closing it.

•As the setting options are many and varied, it is also

possible to make settings for the specific system being

operated that are obviously illogical, impermissible or

even dangerous. This is not due to a fault or defect at

the control unit. In light of this, the installer / person re-

sponsible for the system must carefully check the set-

tings made and modify them as necessary.

Intended use

The type of control unit described in these instructions may only be used for the opera-

tion of tubular drives in roller doors which have fixed stops at the limit positions or a

cover on the barrel (EN 12453). The radio receiver can be operated using any transmit-

ter of the Centronic range of control units (with the exception of transmitters with a time

switching function and / or sun protection function). For travel in the DOWN direction in

maintained operation, a closing edge safety device is necessary.

This type of control unit must not be used in potentially explosive areas.

Other applications, uses and modifications are not permitted in order to protect the

safety of the users and others, since these actions can impair the system’s safety and

carry the risk of personal injury and property damage. The manufacturer does not ac-

cept liability for damage or injury arising from such actions.

Always observe the information in these instructions when operating or repairing the

system. The manufacturer does not accept liability for damage or injury resulting from

improper use.

Product overview

Status display

OPEN button

STOP button

CLOSE button

Hand-held transmitter

Mains plug

Caution

Work on the electrical equipment may only be carried out

by a qualified electrician.

Assembly

Check that the transmitter and receiver are functioning perfectly prior to installation in

the desired location. Do not choose an installation location that is exposed to electro-

magnetic fields, e.g., in the immediate vicinity of contactors (power relays), mains

transformers, ignition transformers, fluorescent tubes, etc., or their connecting cables.

Protect the control unit against direct solar radiation and driving rain.

Open the cover of the control unit. Pull the cable from the cover off and carefully place

the cover to one side. Remove the required cut-outs in the bottom part of the housing.

Cut in at the edges to make the cut-outs easier to remove.

Install the control unit at a suitable operating height (at least 1500 mm from the

ground). Mount the housing with 4 screws (max. diameter of screw head 7.5 mm) in-

serted through the holes provided in the corners.

Plug the cable from the cover back on and adjust the parameters. You can now close

the control unit.

Wiring

Connect the individual pieces of equipment as shown in the connecting diagram.

Caution

Electrical work may only be carried out by qualified elec-

tricians or trained personnel. Always disconnect the

safety mains plug before connecting the equipment. The

connection to the building wiring system must be estab-

lished in accordance with the Machinery Directive using an

adequately sized mains disconnection device. This can be

done by using a plug connection or lockable main switch.

The control unit is protected by a 5 AT, 5 x 20 mm fuse loc-

ated below the shock-hazard protection cover. Switch the

operating voltage off before replacement!

First, pull the insert sleeves over the connecting cable and

then push the insert sleeves into the bottom part of the

housing once all of the wires have been connected. The

control and drive lines (e.g., pulse, open, stop, close...)

must not exceed a max. length of 30m! This does not ap-

ply to the power line. Always route the power line, drive

and control lines in separate cables at a distance from one

another. Non-compliance with the above can lead to mal-

functions!

Operator controls & functions/displays

Explanation of abbreviations

Abbreviation Description

USA Bottom rail sensor; sensor of main closing edge safety device. De-

tects obstructions when the door is lowering

LS Light barrier; for use in buildings as monitoring device for door sys-

tem and to control the automatic reclosing operation.

AWZ Automatic reclosing; the door lowers automatically after the set re-

closing time.

MDrive

[Ta.+] "+" on the PCB

[Ta.-] "-" on the PCB

[Ta.F] "Radio" button on the PCB

[Ta.M] "Menu" button on the PCB

SE1 Safety input 1

SE2 Safety input 2

[Kl.1]..[Kl.25] Reference to connecting terminals

[M.A0]..

[M.C9]

Menu table "Setting a function", menu items "A0" to "C9"

[Er.01]..

[Er.25]

Error message, shown in the display

[F1]..[F2] Radio module function, shown in the display

Inhaltsverzeichnis

Andere Becker Steuereinheit Handbücher

Becker

Becker Centronic SunWindControl SWC62 Bedienungsanleitung

Becker

Becker S30 Bedienungsanleitung

Becker

Becker Centronic UnitControl UC520 Bedienungsanleitung

Becker

Becker Beck-O-Tronic 5 Bedienungsanleitung

Becker

Becker S20 MLS Bedienungsanleitung

Becker

Becker Centronic UnitControl UC42 Bedienungsanleitung

Becker

Becker RCU6513 Betriebsanleitung

Becker

Becker GS2 Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC245-II Bedienungsanleitung

Becker

Becker ACU6100 series Betriebsanleitung

Becker

Becker SWA 200II Bedienungsanleitung

Becker

Becker CentralControl CC41 Installations- und Betriebshandbuch

Becker

Becker HazardControl HC520 Bedienungsanleitung

Becker

Becker RCU6512 Betriebsanleitung

Becker

Becker Centronic MemoControl MC42 Bedienungsanleitung

Becker

Becker HazzardControl HC520 Bedienungsanleitung

Becker

Becker Centronic UnitControl UC520 Bedienungsanleitung

Becker

Becker M3 Bedienungsanleitung

Becker

Becker BDC-i440 Series Bedienungsanleitung

Becker

Becker S55 Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC445-II Bedienungsanleitung

Becker

Becker S80 Bedienungsanleitung

Becker

Becker Beck-O-Tronic 5 Bedienungsanleitung

Becker

Becker Centronic UnitControl UC52 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung