Beckhoff AX2090-TS50-3000 Bedienerhandbuch

Documentation

Transient voltage suppressor - AX2090-

TS50-3000

1.0

12.01.2017

Version:

Date:

Table of content

Transient voltage suppressor - AX2090-

TS50-3000

Version: 1.0

Table of content

1 Foreword ....................................................................................................................................................4

1.1 Notes on the documentation........................................................................................................... 4

1.2 Documentation issue status............................................................................................................ 5

1.3 Appropriate use .............................................................................................................................. 5

2 Safety..........................................................................................................................................................6

2.1 Safety instructions .......................................................................................................................... 6

3 Guidelines and Standards ........................................................................................................................7

3.1 CSA approval.................................................................................................................................. 7

4 Technical data............................................................................................................................................8

4.1 Name plate ..................................................................................................................................... 8

5 Installation of the transient box ...............................................................................................................9

5.1 Connection example ....................................................................................................................... 9

5.2 Installation in the control cabinet .................................................................................................. 10

5.3 Dimensions ................................................................................................................................... 10

6 Support and Service................................................................................................................................11

Foreword

Transient voltage suppressor - AX2090-

TS50-3000

4Version: 1.0

1 Foreword

1.1 Notes on the documentation

This description is only intended for the use of trained specialists in control and automation engineering who

are familiar with the applicable national standards.

It is essential that the documentation and the following notes and explanations are followed when installing

and commissioning the components.

It is the duty of the technical personnel to use the documentation published at the respective time of each

installation and commissioning.

The responsible staff must ensure that the application or use of the products described satisfy all the

requirements for safety, including all the relevant laws, regulations, guidelines and standards.

Disclaimer

The documentation has been prepared with care. The products described are, however, constantly under

development.

We reserve the right to revise and change the documentation at any time and without prior announcement.

No claims for the modification of products that have already been supplied may be made on the basis of the

data, diagrams and descriptions in this documentation.

Trademarks

Beckhoff®, TwinCAT®, EtherCAT®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered

trademarks of and licensed by Beckhoff Automation GmbH.

Other designations used in this publication may be trademarks whose use by third parties for their own

purposes could violate the rights of the owners.

Patent Pending

The EtherCAT Technology is covered, including but not limited to the following patent applications and

patents:

EP1590927, EP1789857, DE102004044764, DE102007017835

with corresponding applications or registrations in various other countries.

The TwinCAT Technology is covered, including but not limited to the following patent applications and

patents:

EP0851348, US6167425 with corresponding applications or registrations in various other countries.

EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH,

Germany

The reproduction, distribution and utilization of this document as well as the communication of its contents to

others without express authorization are prohibited.

patent, utility model or design.

Foreword

Transient voltage suppressor - AX2090-

TS50-3000

Version: 1.0

1.2 Documentation issue status

Version Comment

1.0 First edition

1.3 Appropriate use

The AX2090-TS50-3000 transient boxes are accessory components for the AX5000 servo drive series. They

are specifically designed for the Canadian market, to protect supply networks from overvoltages and to

absorb current peaks.

The AX2090-TS50-3000 transient boxes are always installed as control cabinet components and may only

be commissioned as integrated system components.

WARNING

Caution - Risk of injury!

Electronic equipment is not fail-safe. The machine manufacturer is responsible for ensuring

that the connected motors and the machine are brought into a safe state in the event of a

fault in the drive system.

The transient boxes may only be operated in closed control cabinets, under the conditions described in the

"Technical data [}8]" section.

Safety

Transient voltage suppressor - AX2090-

TS50-3000

6Version: 1.0

2 Safety

2.1 Safety instructions

Safety regulations

Please note the following safety instructions and explanations!

Product-specific safety instructions can be found on following pages or in the areas mounting, wiring,

commissioning etc.

Exclusion of liability

All the components are supplied in particular hardware and software configurations appropriate for the

application. Modifications to hardware or software configurations other than those described in the

documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG.

Personnel qualification

This description is only intended for trained specialists in control, automation and drive engineering who are

familiar with the applicable national standards.

Description of symbols

In this documentation the following symbols are used with an accompanying safety instruction or note. The

safety instructions must be read carefully and followed without fail!

DANGER

Serious risk of injury!

Failure to follow the safety instructions associated with this symbol directly endangers the

life and health of persons.

WARNING

Risk of injury!

Failure to follow the safety instructions associated with this symbol endangers the life and

health of persons.

CAUTION

Personal injuries!

Failure to follow the safety instructions associated with this symbol can lead to injuries to

persons.

Attention

Damage to the environment or devices

Failure to follow the instructions associated with this symbol can lead to damage to the en-

vironment or equipment.

Note

Tip or pointer

This symbol indicates information that contributes to better understanding.

UL pointer

This symbol indicates important information about the UL-compliant.

Guidelines and Standards

Transient voltage suppressor - AX2090-

TS50-3000

Version: 1.0

3 Guidelines and Standards

3.1 CSA approval

The AX2090-TS50-3000 transient box series was approved by the American UL certification authority for the

Canadian market, in accordance with the standards and guidelines applicable in Canada.

Transient box with CSA approval:

AX52090-TS50-3000 – certified according to CAN / CSA C22.2 no. 274.

The cRU logo should be shown on the name plate. If you wish to operate an AX2090-TS50-3000 in Canada,

please check whether the name plate shows the cRU logo.

Technical data

Transient voltage suppressor - AX2090-

TS50-3000

8Version: 1.0

4 Technical data

This section contains general technical data and ordering information for the Beckhoff AX2090-TS50-3000

transient box. See below for name plate information (technical approvals, certifications, mains supply, etc.).

AX2090-TS50-3000

Electrical data

Rated input voltage [VAC] 100 – 480

Max. pulse peak current [A] 3000 at 25 °C

Power derating 20% at 50 °C

Transient protection Fuse AX3-430C or similar according to E128662

AX2090-TS50-3000

Mechanical data

Material Housing: Cast aluminum

Cover: Cast aluminum with CR foam rubber perimeter seal

Surface Textured paint

Color RAL 7001

Ambient temperature [°C] -25 to +85

IP protection class IP 66 (closed state) according to IEC 60 529

NEMA protection class NEMA 4

Weight [kg] 1,56

AX2090-TS50-3000

Ordering information Transient protection for servo drives of the AX5101 – AX5125 and AX520x

series, required for CSA certification

4.1 Name plate

Item no. Name

1 Order number

2 Max. pulse peak current

3 Rated input voltage

4 Input frequency

5 Barcode

6 Protection class

7 cRU-compliant (E195162)

8 Standard mains supply with earthed center

Installation of the transient box

Transient voltage suppressor - AX2090-

TS50-3000

Version: 1.0

5 Installation of the transient box

5.1 Connection example

Item no. Name

1 Transient box AX2090-TS50-3000

2 Mains filter (optional) AX2090-NF50-0014 (AX5101 - AX5112 and AX520x)

Mains filter (optional) AX2090-NF50-0032 (AX5118 and AX5125)

Connection cables

When assembling the connecting cables note the following lengths:

• cable between the transient box and the mains filter (optional): min. 200 mm.

• cable between the mains filter and the AX5000 servo drive: max. 400 mm.

Note

EMC-compliant installation of the components and shield concept

For further information on EMC-compliant installation and the shield concept

please refer to the Beckhoff website (www.beckhoff.com) under:

Motion → Documentation → AX5000 – EMC leaflet.

Installation of the transient box

Transient voltage suppressor - AX2090-

TS50-3000

10 Version: 1.0

5.2 Installation in the control cabinet

Beckhoff Automation GmbH & Co. KG recommends M6 screws with through-hole thread of strength grade

8.8 for installation of the transient box in the control cabinet. The screws should be tightened with a

maximum tightening torque of 7.3 Nm.

WARNING

Caution - Risk of injury through electric shock!

The mounting plate must be earthed according to the statutory regulations.

Attention

Earthing!

Improper earthing of the AX2090-TS50-3000 transient box can result in EMC problems.

5.3 Dimensions

AX2090-TS50-3000

Tightening torques for the fastening screws (cover)

M6 x 40 (4 screws) 2 +1 Nm

Inhaltsverzeichnis

Andere Beckhoff Steuereinheit Handbücher

Beckhoff

Beckhoff AX2090-BW5 Series Bedienerhandbuch

Beckhoff

Beckhoff EPI1 Series Bedienungsanleitung

Beckhoff

Beckhoff KM4602 Bedienerhandbuch

Beckhoff

Beckhoff KL2502 Bedienerhandbuch

Beckhoff

Beckhoff EPP3744 041 Series Bedienungsanleitung

Beckhoff

Beckhoff CX2550 Series Bedienungsanleitung

Beckhoff

Beckhoff PS9011-2420-0001 Bedienerhandbuch

Beckhoff

Beckhoff EK9500 Bedienerhandbuch

Beckhoff

Beckhoff KM10 Series Bedienerhandbuch

Beckhoff

Beckhoff C9900-M900 Benutzerhandbuch

Beckhoff

Beckhoff M1400 Leitfaden

Beckhoff

Beckhoff M310 Bedienungsanleitung

Beckhoff

Beckhoff EP5 Series Bedienerhandbuch

Beckhoff

Beckhoff KM6551 Bedienerhandbuch

Beckhoff

Beckhoff KM10 2 Series Bedienerhandbuch

Beckhoff

Beckhoff CX2500-0061 Bedienungsanleitung

Beckhoff

Beckhoff AX5021 Bedienerhandbuch

Beckhoff

Beckhoff TF6120 Bedienungsanleitung

Beckhoff

Beckhoff EPP3174 Bedienerhandbuch

Beckhoff

Beckhoff AX5801 Bedienungsanleitung

Beckhoff

Beckhoff EP7041 Series Bedienerhandbuch

Beckhoff

Beckhoff EP6224 Bedienerhandbuch

Beckhoff

Beckhoff C9900-M Series Benutzerhandbuch

Beckhoff

Beckhoff C9900-G072 Benutzerhandbuch

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung