The ToxCO® should be wiped clean
with the alcohol-free anbacterial wipes provided
with the monitor before and aer each test
A new SteriBreath™ mouthpiece should be
used for each paent. It is best pracce for
the paent to insert their own mouthpiece
Follow the instrucons
on the ToxCO® to complete
a breath test
The paent will be
prompted to inhale and
hold their breath
There will be a 15 second
countdown
The paent will be prompted to exhale
slowly into the monitor, and should aim
to completely empty their lungs
The results will rise and stabilise
onscreen
Allow the paent to throw away their
used mouthpiece
Results can be interpreted using the
AEGLs for Carbon Monoxide
The ToxCO® should be wiped clean with the
alcohol-free anbacterial wipes provided
with the monitor before and aer each test
Bedfont® Scienc Ltd
Staon Road, Harrietsham, Maidstone, Kent,
ME17 1JA, England
Tel: +44 (0)1622 851122, Fax: +44 (0)1622 854860
Email: ask@bedfont.com, Web: www.bedfont.com
Issue 2 - February 2021, Part No: MKT530
Bedfont® Scienc Limited reserve the right to change or update this literature without
prior noce. Registered in: England and Wales. Registered No: 1289798
The external surfaces of the D-piece™
lter should also be wiped down before and
aer each test
D-piece™ should be replaced every 30 days
The external surfaces of the D-piece™ lter should
also be wiped down before and aer each test
D-piece™ should be replaced every 30 days
Bedfont® Scienc Ltd. has put together some advice on how to safely perform breath tests during the pandemic, however,
rst and foremost, it is recommended that you follow your local guidelines on breath tesng procedures and necessary PPE
How to perform a breath test with a mouthpiece:
Bedfont® GmbH
Mierbachweg 18, 5081, Anif, Austria
Tel: +43 662 635050 Fax: +43 662 635050-50
Email: bedfont-gmbh@bedfont.com
The ToxCO® should be wiped clean
with the alcohol-free anbacterial wipes
provided with the monitor before and aer
each test
Assemble the sampling system by inserng the
D-piece™ lter into the ToxCO®, then the sampling
system and nally the face mask. A new face mask
sampling system should be used for each paent.
Follow the instrucons
on the ToxCO® to complete
a breath test
Prompt the paent to inhale
and exhale into the face mask
Sampling will last 60 seconds as the
%COHb/ppm levels rise and hold.
The result will be shown onscreen.
Allow the paent to throw away their
used mouthpiece
Results can be interpreted using the
face mask test interpretaon chart
The external surfaces of the D-piece™
lter should also be wiped down before and
aer each test
D-piece™ should be replaced every 30 days
Bedfont® Scienc Ltd. has put together some advice on how to safely perform breath tests during the pandemic, however,
rst and foremost, it is recommended that you follow your local guidelines on breath tesng procedures and necessary PPE
How to perform a breath test with a face mask:
The ToxCO® should be wiped clean with the
alcohol-free anbacterial wipes provided
with the monitor before and aer each test
The external surfaces of the D-piece™ lter should
also be wiped down before and aer each test
D-piece™ should be replaced every 30 days
132
4
65
987
65
4
321
8
7
109
