Beech ovens TBR0500 Bedienungsanleitung
Page 1 of 2 2009-11-13 (C)
Changing the TBR0500 from Charcoal to Gas
Removing the Charcoal plug
1. Open the Control Cabinet door
2. Remove the 2 screws that hold the plug in place
3. Slide the plug out
Remove the 2 screws holding the
plug in place and slide plug out
Control Cabinet Door
TBR0500 - Changing from Charcoal to Gas Instruction.doc Page 2 of 2
2
Removing the Gas system
1. Turn off and disconnect the gas line from the inlet to the cabinet
2. Open the Control Cabinet door
3. Remove the 2 nuts holding the valve bracket in place
4. Slide the entire Gas Assembly slightly to the left and then slide the system out
Install in reverse order.
NOTE: If changing from Gas to Charcoal, use only very short screws to mount the
plug as there will be refractory material directly behind the stainless steel. Be careful
not to crack the refractory when inserting screws.
Remove the 2 nuts
holding the valve bracket
in place. Slide to left and
drag Gas system out.
Gas Inlet to cabinet (Valve)
Inhaltsverzeichnis
Andere Beech ovens Ofen Handbücher
Beech ovens
Beech ovens DCK Series Bedienungsanleitung
Beech ovens
Beech ovens REC1250 Bedienungsanleitung
Beech ovens
Beech ovens E Series Bedienungsanleitung
Beech ovens
Beech ovens RND Series Bedienungsanleitung
Beech ovens
Beech ovens RND1300 Bedienungsanleitung
Beech ovens
Beech ovens REC Series Bedienungsanleitung
