06 EN
Safety precautions
Operation
WARNING! Risk of fire or electric shock. Dangerously high voltages are present inside the unit.
- Do not expose the monitor and its components to rain, water, or excessively humid environments.
- Do not disassemble the unit.
- Refer servicing to qualified personnel only.
- Connect the AC power properly and verify if all wiring is properly connected.
WARNING! This equipment is not intended for use in critical applications where its failure to operate would create immediate life
threatening circumstances. Applications including, but not limited to, nuclear reactor control, aerospace navigation systems and life
support systems are not appropriate for this product.
CAUTION! This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this
region, the product may not perform as stated in the specifications.
CAUTION! Please keep the monitor out of direct sunlight, very bright lights and away from any heat source. Lengthy exposure to this type
of environment may result in discoloration and damage to the monitor.
CAUTION! Obstruction of the ventilation holes prevents propercooling of the monitor’s electronics and mayresult in overheating. Remove
any object that could fall into the ventilation holes.
CAUTION! Using an unapproved power cord may lead to overheating. Please use the approved cord provided byBeetronics at all times. If
your power cord is missing, please contact your local Beetronics
Office.
CAUTION! When the monitor is cold and brought into a room or the room temperature goes up quickly, condensation may occur on the
interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the condensation disappears,
otherwise it may cause short cirtuit or damage to the monitor.
CAUTION! Only authorized use accessories manufactured or recommended by Beetronics with this product. Using unapproved
accessories may damage the monitor and will void the warranty.
NOTICE! This product may not be covered by warranty for uses other than those described in this manual.
NOTICE! If the monitor continuously displays a static image, dark smudges or burn-in may appear. To maximize the life of the monitor, we
recommend the monitor be turned off periodically or use of a moving screen saver. Failure to activate a screen saver, or a periodic screen
refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be
repaired. The damage mentioned above is not covered by the warranty.
NOTICE! The backlight of the LCD panel has a fixed lifetime. Depending on the usage pattern, such as continuous usage for long periods,
the lifespan of the backlight may run out sooner, requiring replacement.
Maintenance
CAUTION! Repairs from a person besides an engineer orpartner ofBeetronics B.V. will nullify anywarranty claim. Modifying oropening the
product by the customer may result in damage to the monitor and will nullify any warranty claim.
CAUTION! Do not store or use the monitor in locations exposed to extreme heat, direct sunlight or extreme cold.
In order to maintain the best performance of your monitor, prevent damage and maximize its lifetime, please use the monitor in a location
that falls within the recommended temperature and humidity ranges:
SAFETY PRECAUTIONS
