Behringer HELLBABE HB01 Bedienungsanleitung

HELLBABE HB01

Ultimate Wah-Wah Pedal with Optical Control

Thank you for showing your condence in us by purchasing the BEHRINGER HELLBABE HB01. This professional Wah-Wah pedal is

specially designed to provide everything you need for all-style classic and modern sounds. Thanks to its high-performance features

like exible Q control, freely adjustable heel-down frequency range (perfect for use with bass guitars), tunable boost function

and much more you’re armed with a tool for serious musicians yearning for the most up-to-date sounds to add new dimensions to

their creativity.

WHERE TO PUT YOUR WAH-WAH

Most guitar players put their Wah-Wah pedal before time based eects like reverb, anger, chorus, vibrato etc. This assures that the

eects are added to the Wah-Wah sound. Even all kinds of distortion/overdrive eects should be placed before this unit to achieve

best tone results.

1. Controls

(1) This is the pedal of the HB01. The unit will be activated as soon as you put your foot on and move it. By taking your foot from

the pedal the eect will be deactivated. Depending on the timer adjustment (see (10)) the HB01 remains active for a few

seconds after that.

(2) The RANGE control lets you extend the heel-down frequency to match the frequency range of bass guitars for example

(440 Hz to 250 Hz).

(3) The BOOST switch activates the boost function. The output level is then increased - but only if the Wah eect is switched on.

(4) The BOOST control adjusts the level of output boost (max. +15 dB). This control is only active if the BOOST switch is set to ON

(and if the Wah is switched on).

(5) The Qcontrol allows to change the shape of the lter peak. High Q settings (turned to right position) produce a large,

selective lter peak with a high output level. Low Q settings (turned to left position) provide a lower output level with a

subtle, broad lter peak producing less vocal eect.

(6) Turning the FINE control allows to extend the toe-down frequency of the sweep range up to 2.2 kHz.

(7) Use this ¼" TS IN connector to plug in the instrument cable.

(8) The ¼" TS OUT connector sends the eected signal to your amp.

(9) The ¼" TS OUT/BYPASS connector can be used as second output or as bypass, hard wired to the input, to play out the

uneected signal.

(10) The TIMER ADJ control (accessable through a hole in the housing) is needed to adjust the time the eect remains active after

taking your foot from the pedal.

(11) Use the 9 V connection to plug in a 9 V power supply (not included).

(12) The STATUS-LED illuminates when the eect is activated.

(13) The BOOST-LED illuminates when the boost function is activated.

(14) The rocker screw allows to adjust the resistance of the rocker mechanism.

(13) (12) (14)

(1) (3) (5) (6) (8) (9)

(4) (11) (7) (10) (2)

HELLBABE HB01

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS

PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALLTRADEMARKS ARETHE PROPERTY OFTHEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO

LIABILITY FOR ANY LOSSWHICH MAY BE SUFFERED BY ANY PERSONWHO RELIES EITHERWHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH

OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH

AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO

AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS

MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND

The BATTERY COMPARTMENT is located at the bottom of the unit. Open the lid to install or replace the 9 V battery.

◊ The HB01 has no on/o switch. As soon as you insert the jack into the IN connector, the HB01 begins running.

When not using the HB01, remove the jack from the IN connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom of the unit.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.

Contact our qualied servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and

conditions of our warranty carefully.

4. Specications

Input

Connector ¼" TS

Impedance 1 MΩ

Output

Connector ¼" TS

Impedance 1 kΩ

Output/Bypass

Connector ¼" TS

Impedance 1 kΩ

Power Supply

9 V, 100 mA DC regulated

PSU-SB-CN BEHRINGER 220 VAC adaptor China

PSU-SB-EU BEHRINGER 230 VAC adaptor Europe

PSU-SB-JP BEHRINGER 100 VAC adaptor Japan

PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia

PSU-SB-UK BEHRINGER 240 VAC adaptor UK

PSU-SB-UL BEHRINGER 120 VAC adaptor USA

Power connector 2 mm DC jack, negative center

Battery 9 V type 6LR61

Power consumption 30 mA

Dimensions/Weight

Dimensions (H x W x D) 3.8 x 4.7 x 10" / 99 x 120 x 254 mm

Weight 2.6 lbs / 1.2 kg

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may

be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from

those listed or shown.

Andere Handbücher für HELLBABE HB01

Inhaltsverzeichnis

Andere Behringer Musikpedal Handbücher

Behringer

Behringer HEAVY DISTORTION HD300 Bedienungsanleitung

Behringer

Behringer OVERDRIVE OD400 Bedienungsanleitung

Behringer

Behringer Intelligate IG9 Bedienungsanleitung

Behringer

Behringer B-Control NANO BCN44 Bedienungsanleitung

Behringer

Behringer VINTAGE BASS VB1 Bedienungsanleitung

Behringer

Behringer ULTRA FEEDBACK/DISTORTION FD300 Bedienungsanleitung

Behringer

Behringer DIGITAL DELAY DD600 Bedienungsanleitung

Behringer

Behringer DIGITAL REVERB DR600 Bedienungsanleitung

Behringer

Behringer Ultra Bass Chorus BUC400 Bedienungsanleitung

Behringer

Behringer FD300 Bedienungsanleitung

Behringer

Behringer BSY600 Bedienungsanleitung

Behringer

Behringer TUBE AMP MODELER TM300 Bedienungsanleitung

Behringer

Behringer Spectrum Enhancer SE200 Bedienungsanleitung

Behringer

Behringer VINTAGE DELAY VD400 Bedienungsanleitung

Behringer

Behringer VINTAGE TUBE OVERDRIVE VT911 Bedienungsanleitung

Behringer

Behringer Digital Multi-FX FX600 Bedienungsanleitung

Behringer

Behringer CHROMATIC TUNER TU300 Bedienungsanleitung

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Behringer

Behringer COMPRESSOR SUSTAINER CS400 Bedienungsanleitung

Behringer

Behringer BOD100 Bedienungsanleitung

Behringer

Behringer Digital Multi-FX FX600 Bedienungsanleitung

Behringer

Behringer Ultra Octaver UO300 Bedienungsanleitung

Behringer

Behringer COMPRESSOR SUSTAINER CS400 Bedienungsanleitung

Behringer

Behringer Warp Distortion WD300 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung

BYOC

BYOC Analog Chorus Handbuch

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung