Behringer MIDI FOOT CONTROLLER FCB1010 Bedienungsanleitung

Users Manual

Version 1.2 September 2001

ENGLISH

MIDI FOOT CONTROLLER FCB1010

This symbo , wherever it appears, a erts

you to important operating and

maintenance instructions in the

accompanying iterature. Read the

manua .

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of e ectric shock, do not remove

the cover (or back). No user serviceab e parts inside;

refer servicing to qua ified personne .

WARNING: To reduce the risk of fire or e ectric shock, do not

expose this app iance to rain or moisture.

DETAILED SAFETY INSTRUCTIONS:

A the safety and operation instructions shou d be read before the app iance is operated.

Retain Instructions:

The safety and operating instructions shou d be retained for future reference.

Heed Warnings:

A warnings on the app iance and in the operating instructions shou d be adhered to.

Follo instructions:

A operation and user instructions shou d be fo owed.

Water and Moisture:

The app iance shou d not be used near water (e.g. near a bathtub, washbow , kitchen sink, aundry tub, in a wet

basement, or near a swimming poo etc.).

Ventilation:

The app iance shou d be situated so that its ocation or position does not interfere with its proper venti ation.

For examp e, the app iance shou d not be situated on a bed, sofa, rug, or simi ar surface that may b ock the

venti ation openings, or p aced in a bui t-in insta ation, such as a bookcase or cabinet that may impede the

f ow of air through the venti ation openings.

Heat:

The app iance shou d be situated away from heat sources such as radiators, heat registers, stoves, or other

app iances (inc uding amp ifiers) that produce heat.

Po er Source:

The app iance shou d be connected to a power supp y on y of the type described in the operating instructions

or as marked on the app iance.

Grounding or Polarization:

Precautions shou d be taken so that the grounding or po arization means of an app iance is not defeated.

Po er-Cord Protection:

Power supp y cords shou d be routed so that they are not ike y to be wa ked on or pinched by items p aced

upon or against them, paying particu ar attention to cords and p ugs, convenience receptac es and the point

where they exit from the app iance.

Cleaning:

The app iance shou d be c eaned on y as recommended by the manufacturer.

Non-use Periods:

The power cord of the app iance shou d be unp ugged from the out et when eft unused for a ong period of time.

Debris and Liquid Entry:

Care shou d be taken that debris and/or iquids do not enter the enc osure through openings.

Damage Requiring Service:

The app iance shou d be serviced by qua ified service personne when:

- The power supp y cord or the p ug has been damaged; or

- Debris or iquid has entered the app iance; or

- The app iance has been exposed to rain; or

- The app iance does not appear to operate norma y or exhibits a marked change in performance; or

- The app iance has been dropped, or the enc osure damaged.

Servicing:

The user shou d not attempt to service the app iance beyond that which is described in the operating instructions.

A other servicing shou d be referred to qua ified service personne .

This symbo , wherever it appears,

a erts you to the presence of

uninsu ated dangerous vo tage inside

the enc osurevo tage that may be

sufficient to constitute a risk of shock.

MIDI FOOT CONTROLLER FCB1010

FOREWORD

Dear Customer,

Thank you very much for expressing your confidence in BEHRINGER products by purchasing the BEHRINGER

MIDI FOOT CONTROLLER, and we come to the fami y of BEHRINGER users wor dwide.

I write this etter with great p easureit represents the cu mination of many months of hard work de ivered by

our engineering team to reach a very ambitious goa : to present you with an outstanding device that gives you

maximum f exibi ity and performance; both ive on stage and in the studio.

In designing the new FCB1010, we aimed our focus on you, the discerning musician. We wanted to design a

MIDI foot contro er to satisfy the needs of ambitious guitarists, with some specia functions to make it attractive

for keyboard p ayers as we . It meant a great amount of workdays and nights to accomp ish this goa . But it

was fun, too. Deve oping a product usua y brings a ot of peop e together, and what a great fee ing it is when

everybody who participated in such a project can be proud of what weve achieved.

It is our phi osophy to share our joy with you, because you are the most important member of the BEHRINGER

team. With your high y re evant suggestions for new products youve great y contributed to shaping our company

and making it successfu . In return, we guarantee you uncompromising qua ity (manufactured under ISO9000

certified management system) as we as exce ent technica and audio properties at an extreme y favorab e

price. A of this wi enab e you to fu y unfo d your creativity without being hampered by budget constraints. We

are often asked how it is possib e to produce such high-grade devices at such unbe ievab y ow prices. The

answer is quite simp e: its you, our customers! Many satisfied customers mean arge sa es vo umes, enab ing

us to get favorab e purchases on components, etc. Isnt it on y fair to pass this benefit back to you? Because

we know that your success is our success, too!

I wou d ike to thank a peop e whose he p on Project FCB1010 has made it a rea ity. Everybody has made

very persona contributions, from the designers to many staff members, and fina y to you, the user of BEHRINGER

products.

My friends, its been worth the troub e!

Thank you very much,

U i Behringer

MIDI FOOT CONTROLLER FCB1010

FCB1010

MIDI FOOT CONTROLLER

Ultra-flexible MIDI FOOT CONTROLLER with two expression pedals and MIDI mer e function

s 10 banks of presets, each with 10 fu y user-editab e presets customized for BEHRINGER amp ifiers

sTwo expression peda s with free y assignab e MIDI channe , contro er number and range

s Simu taneous transmission of five MIDI program change commands and two MIDI contro ers per preset

s MIDI NOTE commands for trigger and tap-tempo app ications

s Two programmab e, re ais contro ed SWITCH jacks, e.g. to se ect channe s on any guitar amp

s Enhanced ergonomic design

s No need to take a seateverything can be easi y programmed whi e standing up

s G oba Setup a ows for individua customization

s MIDI SysEx backup function

s MIDI MERGE function a ows for SOFT THROUGH and merging of contro er and input data

s Bui t-in power supp y ensures troub e-free operation

s Open architecture for future software upgrades

sExtreme y rugged construction ensures ong ife even under the most demanding conditions

s Manufactured under ISO9000 certified management system

MIDI FOOT CONTROLLER FCB1010

TABLE OF CONTENTS

1. INTRODUCTION..................................................................................................................... 6

1.1 Design concept ............................................................................................................................... 6

1.2 Before you begin ............................................................................................................................. 6

1.3 Contro e ements ............................................................................................................................. 7

1.3.1 Front pane ........................................................................................................................... 7

1.3.2 Rear pane ............................................................................................................................ 8

2. PROGRAMMING THE FCB1010 ...........................................................................................8

2.1 Se ecting BANKS and PRESETS ................................................................................................... 8

2.2 GLOBAL SETUP .......................................................................................................................... 10

2.3 Quick Start Guide for PRESET programming ................................................................................. 11

2.4 Detai ed PRESET programming .................................................................................................... 12

2.4.1 Programming PROGRAM CHANGES and SWITCHES ....................................................... 12

2.4.2 Programming CONTROL CHANGES and SWITCHES ......................................................... 12

2.4.3 Programming EXPRESSION PEDAL A/B and/or SWITCHES .............................................. 13

2.4.4 Programming the NOTE function and/or SWITCHES ........................................................... 13

2.4.5 TAP-TEMPO function .......................................................................................................... 14

2.5 Data storage ................................................................................................................................. 15

2.5.1 Saving the FCB1010 memory with the he p of SysEx dumps .............................................. 15

2.5.2 Receiving SysEx dumps ..................................................................................................... 15

2.6 Restoring a origina settings ........................................................................................................ 16

3. INSTALLATION ..................................................................................................................... 16

3.1 Connections (genera ) ................................................................................................................... 16

4. MIDI  A STANDARD, A REVOLUTION ................................................................................ 16

4.1 MIDI connections .......................................................................................................................... 16

4.2 MIDI data format ............................................................................................................................ 17

4.2.1 NOTE ON and NOTE OFF messages ................................................................................. 17

4.2.2 CONTROL CHANGE messages .......................................................................................... 17

4.2.3 PROGRAM CHANGE messages ........................................................................................ 17

4.2.4 Running Status ................................................................................................................... 18

5. APPENDI ............................................................................................................................. 18

5.1 MIDI Imp ementation ..................................................................................................................... 18

6. SPECIFICATIONS ................................................................................................................. 19

7. WARRANTY ........................................................................................................................... 20

MIDI FOOT CONTROLLER FCB1010

1. INTRODUCTION

Congratu ations! With the BEHRINGER MIDI FOOT CONTROLLER FCB1010 you purchased an u tra-f exib e

contro er unit for a wide range of app ications, whether you are a guitarist, keyboard p ayer or studio engineer:

10 BANKS with 10 PRESETS each and two fu y user-programmab e expression peda s wi give you enough

f exibi ity to manage your MIDI equipment. Guitar p ayers wi particu ar y appreciate the option of se ecting

channe s using two ana og SWITCHES, as they a ow you to fu y contro both amp ifier and effects from one

switching center. And with its u tra-rugged enc osure and bui t-in power supp y the FCB1010 is abso ute y

ready for the road, too. The easy-to-use programming interface gives you fun instead of frustration, and invites

you to fu y exp oit the capabi ities of your MIDI equipment.

+The operating instructions given in this manual ill introduce you to the FCB1010 and the host

of functions it offers. After reading the manual carefully, please keep it on hand for future

reference.

1.1 Design concept

The phi osophy behind BEHRINGER products guarantees a no-compromise circuit design and emp oys on y

the best components. To comp ement this design the choice of components inc udes high-to erance resistors

and capacitors, switches and severa other stringent y se ected e ements.

The FCB1010 was bui t on the basis of SMD techno ogy (Surface Mounted Device). These sub-miniature

components known from aerospace techno ogy a ow for an extreme packing density and enhance the units

re iabi ity. Additiona y, the FCB1010 was manufactured in comp iance with BEHRINGERs stringent qua ity

contro .

1.2 Before you begin

Your FCB1010 was carefu y packed in the factory and the packaging is designed to protect the unit from rough

hand ing. Neverthe ess, we recommend that you carefu y examine the packaging and its contents for any

signs of physica damage, which may have occurred during transit.

+If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the

shipping company immediately, other ise claims for damage or replacement may not be

granted. Shipping claims must be made by the consignee.

+Before you connect your FCB1010 to the mains, please make sure that your local voltage

matches the voltage required by the unit:

Three triangu ar markings can be found on the fuse ho der at the AC power connection socket. Two of these

three triang es wi be a igned with one another. The FCB1010 is set to the operating vo tage shown next to

these markings and can be switched over by twisting the fuse ho der by 180°. IMPORTANT: This does not

apply to export models designed only for 115 V AC!

The mains connection is made by using the enc osed mains cab e and a standard IEC receptac e. It meets a

of the internationa safety certification requirements.

+Please make sure that all units have a proper ground connection. For your o n safety, never

remove or disable the ground connector of the unit or of the AC po er cable.

MIDI connections (IN and OUT/THRU) are made using standard DIN connectors, the corresponding data are

transmitted via potentia -free opto-coup ers. The two switching outputs use re ay contacts for ga vanic separation

and are connected via stereo phone jack cab es.

P ease see chapters 3 INSTALLATION and 4.1 MIDI Connections for further detai s.

1. INTRODUCTION

MIDI FOOT CONTROLLER FCB1010

1.3 Control elements

1.3.1 Front panel

Fig. 1.1: Front panel control elements

1The foot s itches 1 through 10/0 a ow you to se ect PRESETS, program your FCB1010 and enter

data in programming mode.

2The UP/DOWN s itches are used to scro through the various BANKS and programming eve s. In

programming mode, UP and DOWN are your ENTER and ESCAPE keys respective y.

+When DIRECT SELECT mode is activated (see chapter 2 PROGRAMMING THE FCB1010), the

UP/DOWN s itches are no longer needed for BANK selection and are free to perform a special

function: in the GLOBAL SETUP menu you can program them to control the SWITCH RELAYS

(UP: SWITCH 1 RELAY, DOWN: SWITCH 2 RELAY). In this case, you can toggle bet een the

preprogrammed SWITCH settings, each time you step on these s itches.

3EXPRESSION PEDAL A. A ows you to change contro er va ues continuous y. In programming mode,

the peda is used for data entry.

4EXPRESSION PEDAL B. A ows you to change contro er va ues continuous y.

5STATUS-LEDs. The ye ow LEDs disp ay the current status of the PRESET programming or GLOBAL

SETUP functions.

6LED-Display. Informs you about the current y se ected BANK/PRESET number. In programming mode,

it disp ays any va ue changes.

1. INTRODUCTION

MIDI FOOT CONTROLLER FCB1010

1.3.2 Rear panel

Fig. 1.2: Rear panel connectors

FUSE HOLDER / VOLTAGE SELECTOR. P ease make sure that your oca vo tage matches the vo tage

indicated on the unit, before you attempt to connect and operate the FCB1010. B own fuses may on y

be rep aced by fuses of the same type and rating. Some mode s a ow for inserting the fuse ho der in two

different positions, in order to switch over from 230-V to 115-V operation, and vice versa. P ease note

that for 115-V operation outside Europe, you need to use a fuse of a higher rating (see chapter 3

INSTALLATION).

8IEC POWER CONNECTOR. Use the enc osed power cord to connect the unit to the mains.

9POWER s itch. Use this switch to switch the FCB1010 on or off.

10 SERIAL NUMBER. P ease take the time to have the warranty card fi ed out comp ete y, and return it

within 14 days after the date of purchase, so as to be entit ed to benefit from our extended warranty. Or

use our on ine registration option avai ab e on the Wor d Wide Web under www.behringer.com.

11 SWITCHES 1 and 2. Use these jacks to connect your amp ifier for channe se ection (mono or stereo

phone jack cab e).

12 MIDI IN. The MIDI IN of your FCB1010 connects to a sequencer or simi ar device, in order to down oad

the memory data saved before with the he p of the MIDI SysEx function. Additiona y, data can be ooped

through the FCB1010 and merged with other data using the MIDI MERGE function. Subsequent y, the

combined data are avai ab e at the MIDI OUT/THRU connector.

13 MIDI OUT/THRU. Use this jack to connect the devices you wish to contro from your FCB1010. The

SOFT THRU circuit a ows you to oop through any signa s present at the MIDI IN of your FCB1010,

merge them with the units own data stream, and fina y output the combined data at the MIDI OUT.

2. PROGRAMMING THE FCB1010

In this chapter you wi earn to program your FCB1010 and adapt it to your specific MIDI set-up. But dont

worry, you wont have to earn a programming anguage before you cou d give your FCB1010 a sing e MIDI

command. The unit wi perform a functions for you, one after the other. Simp y make and confirm your

choices. If particu ar functions prompt you to enter a parameter, this wi be covered specifica y. Lets begin

with...

2.1 Selecting BANKS and P ESETS

There are two options to se ect a BANK and the PRESETS it contains. Which one you use depends on the

DIRECT SELECT parameter in the GLOBAL SETUP menu. If DIRECT SELECT is on, you can use the PRESET

foot switches to direct y se ect the BANK number fo owed by the PRESET number. If DIRECT SELECT is off,

you need to step through the various BANKS (using the UP/DOWN switches), then se ect a PRESET from a

bank. The defau t setting is OFF. The i ustrations be ow show the two options.

Lets assume you wish to se ect PRESET #1 from BANK #3...

2. PROGRAMMING THE FCB1010

MIDI FOOT CONTROLLER FCB1010

Fig. 2.1: PRESET selection with DIRECT SELECT disa led

Step 1: Use the UP/DOWN switches to go to the BANK that contains the PRESET of your choice

(here: BANK #3).

Step 2: Se ect the PRESET you wish to use (here: PRESET #1).

If DIRECT SELECT is on, do as fo ows to se ect PRESET #1 from BANK #3:

Fig. 2.2: PRESET selection with DIRECT SELECT ena led

Step 1: Se ect the BANK of your choice (here: BANK #3) by stepping on foot switch #3.

Step 2: Se ect the PRESET you wish to use (here: PRESET #1) by stepping on foot switch #1.

As this examp e shows, the DIRECT SELECT feature gives you a faster access to BANKS and PRESETS

than without this function. Which option to use is entire y up to you. As ong as you need the PRESETS from

one BANK on y, it wi be advisab e to disab e the DIRECT SELECT function.

2. PROGRAMMING THE FCB1010

MIDI FOOT CONTROLLER FCB1010

2.2 GLOBAL SETUP

In the GLOBAL SETUP menu you can set the parameters that app y to both the PRESETS and FUNCTIONS

of your FCB1010 (e.g. MIDI channe se ection, SYSEX SEND & RCV, DIRECT SELECT etc.).

sKeep the DOWN switch pressed during power-up for about 2.5 s to enter GLOBAL SETUP mode. The

DIRECT SELECT LED in the disp ay ights up.

sEnab e/disab e DIRECT SELECT with foot switch 10/0. As ong as the LED of foot switch 10/0 ights up,

DIRECT SELECT is activated.

sPress UP to go to the next eve . The MIDI FUNCTION LED in the disp ay starts f ashing.

sSe ect a MIDI function whose MIDI channe you wish to edit, by pressing one of the foot switches 1 through

10/0:

Switch MIDI function

1 PRG CHG 1

2 PRG CHG 2

3 PRG CHG 3

4 PRG CHG 4

5 PRG CHG 5

6CNT1

7CNT2

8 EXP A

9 EXP B

10/0 NOTE

Ta . 2.1: Foot switches and assigned MIDI functions

sThe LED of the foot switch which corresponds to the respective MIDI function starts f ashing.

sPress UP/ENTER to confirm the se ected MIDI function. The MIDI CHAN. LED and the number in the

disp ay ight up.

sChoose the MIDI channe for the se ected function, either direct y via foot switches 1 through 10/0 or by

using the EXPRESSION PEDAL A.

sPress UP/ENTER to confirm the chosen va ue and to go to the next eve , or press DOWN/ESCAPE to

cance .

sCONFIGURATION (the CONFIG. LED ights up. This, however, requires that UP/ENTER has been activated):

On this eve you can choose from the fo owing functions assigned to the foot switches as shown in tab e 2.2:

Switch Function Action

Determines whether the UP switch controls SWITCH 1

relay ("toggle") with DIRECT SELECT on.

Determines whether the DOWN switch controls Switch 2

relay ("toggle") with DIRECT SELECT on.

6 SYSEX SEND Sends the entire memory as a sysex dump.

When this switch is pressed, the FCB1010 waits for the

reception of system-exclusive data.

Switch LED goes out when the data have been received correctly.

Allws to merge MIDI IN data with FCB1010-generated data.

The combined data stream is subsequently output

at the MIDI OUT.

Enables/disables Running Status feature.

Serves to make efficient use of the MIDI transmission rate.

The MIDI Status Byte from the Expression Pedals is sent only

if it differs from the preceding Status Byte.

9 RUNNING STATUS

7 SYSEX RCV

8MERGE

1 SWITCH 1

2 SWITCH 2

Ta . 2.2: Assignment of foot switches in CONFIGURATION setup menu

2. PROGRAMMING THE FCB1010

Andere Handbücher für MIDI FOOT CONTROLLER FCB1010

Inhaltsverzeichnis

Andere Behringer Musikpedal Handbücher

Behringer

Behringer AM400 Bedienungsanleitung

Behringer

Behringer SUPER FUZZ SF300 Bedienungsanleitung

Behringer

Behringer ULTRA FEEDBACK/DISTORTION FD300 Bedienungsanleitung

Behringer

Behringer Slow Motion SM200 Bedienungsanleitung

Behringer

Behringer SLOW MOTION SM200 Bedienungsanleitung

Behringer

Behringer DISTORTION-X XD300 Bedienungsanleitung

Behringer

Behringer HELLBABE HB01 Bedienungsanleitung

Behringer

Behringer Foot Controller FCV100 Bedienungsanleitung

Behringer

Behringer HI BAND FLANGER HF300 Bedienungsanleitung

Behringer

Behringer DIGITAL REVERB DR600 Bedienungsanleitung

Behringer

Behringer ROTARY MACHINE RM600 Bedienungsanleitung

Behringer

Behringer ULTRA TREMOLO/PAN TP300 Bedienungsanleitung

Behringer

Behringer DIGITAL REVERB DR600 Bedienungsanleitung

Behringer

Behringer HEAVY DISTORTION HD300 Bedienungsanleitung

Behringer

Behringer AB100 Bedienungsanleitung

Behringer

Behringer DYNAMIC WAH DW400 Bedienungsanleitung

Behringer

Behringer Super Flanger SF400 Bedienungsanleitung

Behringer

Behringer DM100 Bedienungsanleitung

Behringer

Behringer Noise Reducer NR100 Bedienungsanleitung

Behringer

Behringer ULTRA CHORUS UC200 Bedienungsanleitung

Behringer

Behringer ULTRA VIBRATO UV300 Bedienungsanleitung

Behringer

Behringer REVERB MACHINE RV600 Bedienungsanleitung

Behringer

Behringer CHROMATIC TUNER TU100 Bedienungsanleitung

Behringer

Behringer DIGITAL DELAY DD400 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung

Tube Works

Tube Works 310 Bedienungsanleitung

EarthQuaker Devices

EarthQuaker Devices Tentacle Bedienungsanleitung