Beko BD 220 Bedienungsanleitung

User Manual

KEYS POSITION .............................. 3

LCD DISPLAY ON HANDSET ........ 4

MENU OPTIONS ............................ 5

QUICk REFERENCE GUIDE ......... 6

INSTALLATION PRECAUTION ...... 7

What is in the box ................................. 7

Connection and condition for use ........... 7

Choosing a site for the Base ....... ......... 7

Radio signal between handset and base. 7

Charging the batteries .......................... 8

Electrical Safety .................................... 8

Emergency calls .................................... 8

STARTING UP

Connecting the mains power supply to the

unit ........................................................9

Inserting the handset battery ................ 9

Charging the handset ........................... 9

Handset battery charge level ............... 9

Setting the handset date and time .........9

Connecting the telephone line .............. 9

Standby mode display ..........................10

USING YOUR PHONE

To make and end calls ........................ 11

Preparatory dialing (pre-dial) ...............11

Receiving external calls ...................... 11

Handsfree Function ........................... 11

Re-dialing .......................................... 12

Using MUTE ...................................... 12

Using RECALL (FLASH) ................... 12

Using Pause function ....................... 12

CONTENTS

Adjust handset earpiece during a call.12

Switching your handset On or Off ...... 13

Page function ................................... 13

Out of range warning ....................... .13

USING PHONE BOOK

Storing an entry in the phone book .....13

Reviewing the phonebook .............. .. 14

Dialing a phone book entry .............. .14

Editing an entry in the phone book ....15

Deleting an entry in the phonebook .... 15

Deleting all entries in the phonebook...15

CALLER ID

Call Screening ................................... 16

CID Phonebook Matching .................. 16

CID Reserved and Unavailable ...... ....16

CID - Repeat Call Indication .............. 16

CID call list review ..............................16

To store a CID entry in the phonebook.17

Deleting a CID record ............ ............17

Call back from the calls list .................18

Voice Mail Box .............. ....................18

Caller ID on Call Waiting (CID-CW)..18

PERSONALIZING YOUR SETTING

Selecting Handset Ringer melodies for

External or Internal Calls .................. 19

Setting the handset ringer volume .... 19

Selecting Base Ringer melodies ....... 19

Setting Base Ringer Volume ............. 19

Setting Handset Earpiece Volume . ....20

Alert tones ....................................... 20

Naming the Handset ......................... 21

Language selection .......................... 21

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Keypad lock ..................................... 21

Auto Answering ................................. 21

EXPANDING YOUR DECT SYSTEM

Adding new handset ...................... 22

- Registering a new handset .. 22

compatible handset......................... 23

Multi Handset Use .......................... 23

Internal outgoing calls ...................... 23

Transfering a CalL ........................... 23

Call Shuttle .................................... 23

Three way conference call ..................24

Handset ......................... 24

compatible handse ........................ 24

Base Selection ............................... 24

To select base station .................... 24

ADVANCE FEATURES

Programming ................................... 25

Change PIN Code ........................... 25

De-registering a handset .................. 25

Redall (Flash) time selection ............ 25

Pause time selection ........................ 26

Reset to factory default settings ....... 26

Quick reset ........................................26

Default setting parameters ............... 27

Technical details ;;;;;;......................... 27

USE IN BUSINESS ................... 28

Troubleshooting Guid........................ 29

In Use LED indicator (green light)

Illuminates when base is power on.

Flashes when the line is in use / a call comes.

 Flashes when you have missed calls.

 Flashes quickly when entering registration mode.

KEYS POSITION

Earpiece/Receiver

Display

 The display lights up every time a keypad

button is pressed and when you receive

an incoming call.

Speaker phone / Handsfree

Press to use the phone in handsfree mode.

Talk-On / Flash

Press to make and receive calls.

For use with certain network services

Redial / Up / Pause

Use to redial any of the last 10 numbers called.

Press and hold to enter a pause in a number.

Press during a call to inscrease earpiece volume.

Use to scroll up through the menu options and

through phonebook and Calls logg entries.

Phonebook / Mute

Use to access the phonebook.

During a call, press to mute

your voice.

Calls log / Down

Use to acess the Calls log.

Press during a call to decrease

earpiece volume.

Use to scroll down through the menu

options and through phonebook and

Calls log entries.

OK/ Menu

Press to confirm a setting.

Press to access the menu.

Talk-Off / Esc / Power

Press to end calls.

Press to escape from programming.

Press and hold in standby mode to

switch the handset power off.

Press when the handset is off, to

switch back on again.

Microphone

Page (Handset finder)

Press to locate a misplaced handset

Long press to enter registration mode

Battery charging LED indicator (red light)

 Illuminates when handset is in charge.

- 3 -

INT / Cancel

Press to delete an incorrect

character / digit.

Press to return to previous menu.

Call another registered handsets.

Voice Mail Box

Press and hold to dial PSTN voice mail box center

LCD DISPLAY ON HANDSET

Symbol Explanation

Always displayed when your handset is on,

shows the battery status.

All bars filled - battery fully charged.

Empty and you hear a warning tone (during a call)

- batteries are low and need charging.

In Use indicator

Illuminate when the phone is in use.

Flashes when receiving an external (outside) call.

Remains steady when an external call is in progress.

Flashes when receiving an internal call.

Remains steady when an internal call is in progress.

Flashes when you have new Calls log entries.

Remains steady when viewing the Calls log.

Keypad is locked. You cannot make calls,

only receive them.

Displayed when you have a message waiting.

Displayed when you access the menu.

Phonebook is in use.

Symbol Explanation

Handsfree speaker is in use.

The call is muted.

- Remains steady - the handset has a satisfactory

signal link with the base.

- Flashes when the handset is losing its signal link

with the base

Displayed when the handset ringer is set to OFF.

- When the displayed phone number/name has more

than 12 digits/charcters, this symbol is displayed to

indicate there is more to view. The display can only

show 12 digits/characters at one time.

- Displayed if item list extends above current position.

- When the displayed phone number/name has more

than 12 digits / charcters, this symbol is displayed to

indicate there is more to view. The display can only

show 12 digits/characters at one time.

- Displayed if item list extends above current position.

- 4 -

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

MENU OPTIONS

PHONE BOOK ADD

EDIT

DELETE

DELETE ALL

LIST

HANDSET TONES - KEY TONE

LOW BATT

RANGE

RING VOL

EXT MELODY

INT MELODY

EAR VOL

AUTO ANS

HS NAME

LANGUAGE

DATE / TIME

BASE RING VOL

RING MELODY

RECALL

PAUSE

CHANGE PIN

DEFAULT

REGISTRATION REGISTER

SEL BASE

DEL HS

○○○○○○○○○○○○○○○○○○○○○○○

- 5 -

Function Button press

Switch handset off until display goes off.

Switch handset on until display comes on.

Adjust earpiece volume During a call, press or to select required volume.

Make a call / preparatory call , enter number / Enter number, .

End a call or place handset on base / charger.

Receive a call Phone rings, .

Make a handsfree call , enter number, press or place handset on base cradle/charger to end call.

Redial , or to display number, .

Privacy During a call, press , then again to resume call.

Store phonebook number , PHONEBOOK, , ADD , NAME? enter name, , NUMBER? enter number, , VIP OFF,

use or to select ringer melody for VIP setting, , to exit.

Dial phonebook number , or (or enter keypad letter), .

Internal call , enter internal handset number, to exit.

Select handset ringer volume , , HANDSET , RING VOL , or to select level, , to exit.

Select handset ringer melody , , HANDSET , EXT MELODY or INT MELODY , or to select melody, .

QUICK REFERENCE GUIDE

- 6 -

INSTALLATION PRECAUTION

What is in the box

When you unpack your phone, make sure you keep all packing

materials in a safe place, in case you later need to transport it

or return it for servicing. In the box, you will find:

-handset

- 2 pieces of AAA type rechargeable 600mAh battery

- A piece ofbase unit

- AC adaptor

- Battery cover

- User Manual

- A telephone line cable

If you have purchased a multi-pack, for each additional

handset, youi will have the following:

- Additional handset

- 2 pieces of AAA type rechargeable 600mAh battery

- Charger

- AC adaptor

- Battery cover

Connection and condition for use

The phone can be connected to the public network using the

standard telephone plug and socket systems. You can connect

your phone to:

- A line connected directly to a local exchange, with its

own directory number.

- An extension socket connected to a local exchange

- An extension on an approved PABX.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Choosing a site for the Base

The base unit should be installed where:

- The mains adaptor plug will reach the 220V AC main

power supply.

- The telephone cable will reach your telephone line socket.

- It is not close to another telephone.

- It is not close to a sink, shower or anywhere else where it

might get wet

- It is not close to other electrical equipment (washing

machines, microwave oven, TV, fluorescent lights, etc.)

1. Choose a suitable site for the base

2. Plug-in the mains power lead and the telephone line cord

on the base back side, make sure the telephone line is

not yet connected to the telephone wall socket.

3. Plug the mains AC adaptor into the AC mains socket. The

base will beep.

Radio signal between handset and base

To use your cordless telephone, you must be able to establish a

radio link. It is therefore noted that:

- Placing the base unit as high as practical will give a

better result.

- Placing the base unit near any large metal object,

like refrigerator or filling cabinet may block the

transmission of radio signal.

- Other solid structures, like walls may reduce the

radio signal strength.

- 7 -

Charging the batteries

Your handset needs battery to operate. During the first use of

your phone, it is recommended that the handset is left over on

charge overnight to ensure maximum in-use time.

1. Only use the rechargeable batteries supplied with your

phone.

2. Install the rechargeable batteries into the rear of your

handset. MAKE SURE you insert the batteries in correct

polarity.

3. Position the battery cover over the rear of the handset and

slide into place.

4. Place the handset on the base unit to charge.

5. The red LED CHARGE light on the base unit indicating that

the handset is charging, but it will not go out even if the

battery if full - it will light up whenever the handset is on the

base cradle.

NOTE : 1) If the charge LED on the base do not light up,

reposition the handset in the base unit ensuring the charging

points contact. 2) Regular cleaning is necessary for base and

handset charge contacts with clean dry cloth to maintain

conductivity of the contacts.

Electrical Safety

1. DO NOT install the base unit near a sink, bath or shower or

anywhere else where it could get wet. Electrical equipment

can cause serious injury if used while you are wet or

standing on water.

2. If the base unit ever falls into water, DO NOT retrieve it until

you have unplugged the AC mains power adaptor and the

telephone line plug from the telephone wall socket.

3. DO NOT allow the handset to come in contact with water.

4. DO NOT open the handset or the base.

5. DO NOT allow the charging contacts or the battery to

come in contact with electrical conductive materials such

as metals, rings, paper clip, key, etc.

6. MAKE SURE you insert the batteries in correct polarity.

7. NEVER USE your DECT phone in the open air during a

thunderstorm - unplug the base unit from the telephone

line and the AC mains socket where there are storms in

your area. Damage caused by lighting may likely happen.

8. If your DECT phone is not to be used for long period of

time, disconnect the main AC power adaptor from the AC

power socket and the telephone line from the telephone

wall socket.

Emergency calls

Your DECT phone need mains power. So you cannot use for

placing a call during AC power failure.

Thus, a basic phone that do not need AC mains power is

needed to place an emergency call during power failure.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

- 8 -

STARTING UP

Connecting the mains power supply to the unit

- Plug the mains power adapter lead into the rear base.

- Now plug the mains power adapter into the power socket and

switch the power on.

Inserting the handset battery

- Remove the battery compartment cover from the rear hand.

- Install 2 pieces of AAA Ni-MH rechargeable batteries in the

battery compartment with correct polarity. (If battery level is

enough, the handset will power on and then enter standby

mode.)

- Shut the battery cover.

Charging the handset

- You will need to fully charge the handset before use. Place

the handset in the base unit.

- When the handset sits in the base, the handset battery is

being charged. The charge LED on the base will come on

and stay lit while the battery is being charged.

- When the battery is fully charged, the status symbol displayed

on the handset LCD screen should show as fully charged.

Note: First time charging time: 15 hours

Handset battery charge level

1. The Level of the battery power is indicated as a battery icon

on the LCD display in the handset. If the battery icon shows

empty, your phone need to be charged.

2. When in use and your phone emit battery low warning tone,

your phone need to be charged.

3. When fully charge your phone will operate for eight (8)

hours talk time for earpiece, one hour for the speaker phone

and 100 hours of standby time.

Setting the handset date and time

1. Press the OK/Menu button. You will see PHONEBOOK in

the display.

2. Press DOWN button to scroll to HANDSET option.

3. Press OK/Menu button to confirm.

4. Press DOWN button to scroll to DATE/TIME.

5. Press OK/Menu button again. The first digit of Date will

flash.

6. Enter two digits of the current date (e.g. 26) from the

numeric keypad. Then the digit of Month will flash.

7. Enter two digits of the current month (e.g. 08) from the

numeric keypad. Then the digit of Hour will flash.

8. Enter two digits of the current hour (e.g. 18) from the

numeric keypad. Then the digit of Minute will flash.

(Note: The Date/Time format is 24 hours.)

9. Enter two digits of the current minute (e.g. 54) from the

numeric keypad.

10. Press OK/Menu button to confirm the setting and

confirmation tone will be heard..

11. Press the TALK-OFF button to escape to standby mode.

Connecting the telephone line

-Plug the telephone line cord into the line socket at

the rear base.

-Plug the other end into the telephone wall socket.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

- 9 -

Standby mode display

When the handset is not in use, the handset is in the standby

mode. The LCD will display as:

1 DECT 10:37

Where:

1: Handset assigned number

DECT: Handset name

10:37: Time of the day ( 10 AM, 37 minutes)

(ex : 23:37 : 11 PM, 37 minutes)

Note that, the clock and date should be set.

Note : When your phone encountered AC power failure, or

when you removed the AC adaptor, the clock will be inaccurate.

Upon power up, it will be automatically set the time to 00:00

and the date to 01/01. You need to set the correct time and

date when your base is power on.

If your PSTN provides FSK CID, your DECT phone clock will

automatically set the time and date when you receive CID from

the PSTN network. This will only work if your PSTN

connection can provide FSK CID with valid date and time

information.

When your phone handset is out of battery power, just put the

handset on the charge cradle on the base and the time and

date will be restored. There is no need to set again the time

and day.

If you register new handset of your phone, there is no need to

set the clock on the new handset. The Time and Date will

synchronized to all handsets. If you changed the Time and

Date on one handset, the changes will take effect on all

handsets.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

- 10 -

Inhaltsverzeichnis

Andere Beko Schnurloses Telefon Handbücher

Beko

Beko BD-610 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung