Belair BCIF680B Bedienungsanleitung

○

Dear customer:

Thank you for purchasing this Induction cooktop. Please read this instruction manual carefully before

use and installation. Keep it somewhere safe for future reference.

Product Introduction

The BCIF680B Induction cooktop with it’s advanced induction heating system, micro-computerized

control, low energy usage and multi-functions, is the optimum solution for a modern kitchen.

The Induction hob has been designed with the focus on the user. Manufactured from high quality

materials, the unit is safe and reliable, ergonomic and will enhance your cooking experience.

Working Principle

The two main components of the Induction cooktop are the induction heating coils, and the control

system. The electronic control system energizes the coils, causing them to generate powerful magnetic

fields in the areas immediately above the coils. These fields travel through the vitro ceramic plate on

which the pans are placed and eddy currents are formed in the ferromagnetic materials in the pans. The

tremendous energy generated by the eddy currents heat the food directly by conducting the heat through

the base of the pans and into the food. Good quality pans suited to the particular cooking processes

being carried out are essential for obtaining good cooking results

○

2 Safety

This hob is designed for domestic use only.

With a view to constantly improving our products, we reserve the right to make any changes to their

technical, programming or aesthetic features connected with their technical evolution.

Over- Temperature Protection

Temperature sensors are fitted and can monitor the temperatures inside the hob.

When an excessive temperature is monitored, the induction hob will stop operation automatically.

Detection of Small Articles

If a pot of less than 80 mm in diameter, small articles (knife, fork, scissors, keys , etc.) or non-magnetic

pots (such as aluminum ) are sensed, the buzzers give out an alarm lasting about 30 seconds. If a

suitable pan is not placed on the hob the cooker will switch off.

Heat Indication

When the hob is used for a long time, residual heat remains in the heating zone for a few minutes. The

code “H” appears, warning the user to avoid touching the heating zone.

Auto shutdown protection

Auto shut down is a safety protection function for your induction cooker. It will shut down automatically if

you forget to turn off your cooking.

When a pot is removed, the induction hotplate will stop heating that zone immediately and shut it down

after the buzzer sounds for 1 minute.

Reminder: People with a heart pacemaker should only use this product under the guidance of a licensed

medical practitioner.

○

3 Installation

Cut an aperture in the table surface in accordance with the sizes shown in the drawing. For the purpose

of installation, and use, a minimum of 50 mm space shall be preserved around the hole. Be sure the

thickness of the table surface is at least 30mm. Please select heat-resistant table material to avoid

deformation caused by the heat radiation from the hotplate. As an alternative to the method below, the

hob can be flush mounted provided the adjacent surface is stainless steel or some other suitable heat

proof material. See Figure (1)

Ensure that the induction hob is well ventilated and the air inlet and outlet is not blocked. Good

ventilation is vital for a long service life of the induction cooker. As shown in Fig 2 Ensure the

induction hob is in good working order.

Note: The safety distance between the hotplate and any cupboard above the hotplate should be at least

760mm.

Apply suitable sealant to secure the hob to the worktop and to prevent ingress of water.

Caution

The induction hotplate must be installed by a qualified electrician.

Do not install the cooktop yourself.

The induction hob should not be mounted to cooling equipment, dishwashers and rotary dryers or any

other electrical appliance

The induction hob must be well ventilated to ensure efficient cooling prolonging its’life and

ensuring reliability.

Adjacent walls, the worktop and any surfaces above the hob must be made of heat resistant materials.

To avoid any damage, the sandwich layer and adhesive must be resistant to heat.

PowerConnection

The socket shall be connected according to the relevant national standard or connected to a single-pole

cut-out. The method of connection is shown in Figure (3):

○

If the cable is damaged or needs to be replaced, the operation must be carried out the by a fully qualified

electrician.

If the appliance is being connected directly to the mains an omni polar circuit-breaker must be installed

with a minimum opening of 3mm between contacts. The installer must ensure that the correct electrical

connection has been made and that it is compliant with safety regulations. The cable must not be bent or

compressed. The cable must be checked regularly and replaced by authorized technicians only.

Induction hotplate appearance

Schematic diagram of the control panel

○

Instructions for Use

Preparation before using:

After power on, the buzzer will beep once, all the indicators light up for 1 second then go out, indicating

the induction hotplate is in standby mode.

Put the pot in the center of the heating zone.

Operation Instructions

Heating function

1. Pressing ,the light will shine to_ _ indicate that the induction cooker is heating up

2. Pressing“+”, the light will shine, the cooker will heat at 8-level. Set the cooker at desired power by

directly pressing by “-”or “+” to adjust the power from 8 to 1 level,

3. Pressing “-”the light will shine, the cooker will heat at 1-level. Set the cooker at desired power by

directly pressing y “+”or “-” to adjust the power from 1 to 8 levels

4. Adjust the time from 0 minute to 99 minutes by pressing the knob at the state of Time.

Note:

1) If no pan is found in the heating zone, the buzzer gives out an alarm in the heating mode. In case of

the user attempting to use an unsuitable pan, the heating zone will enter the standby state automatically

within 30 seconds.

2) Hotplate "1, 2" are Team A control zone, "3, 4" are Team B control zone. Team A and Team B operate

independently.

Timing function

1. Press function adjust key to select timing, the indicators flashes.

2. Press heating zone “’key to set heating time.

3. Original heating power set or temperature setting recognized.

4. Cancel the timer:

a) The timer indicator returns to “0”;

b) Restart after switching off

Locking

To ensure normal operation, and to avoid inadvertent change of mode, press “LOCK”key, the hob enters

the locked state, the locking indicator flashes and other keys are disabled.

Unlocking: To unlock the induction hob, hold the “LOCK”key for three seconds.

The above power may vary according to the material and the size of pan.

Selection of suitable cookware for Induction cooking

This induction hob is able to identify multiple heating appliances, and you can test them by the following

methods: Place the appliance in the heating zone. If the corresponding heating zone displays a power

level, it shows the suitability of the pan; if “U” flashes, the pan is not suitable for induction cooking.

Generally, if the base of the pan is magnetic it should be suitable for induction cooking.

If the buzzer gives out an alarm, this indicates that the pan is not suitable for the induction hotplate; the

hotplate will turn off after 1 minute.

Notes:

1. Snapping sound: Snapping sounds could be produced if a pan with a composite base is used.

Because the pans are made of different materials, the movement of different materials in the heating

zone can produce noise. Selection of proper pan can reduce or eliminate the noise.

2. Squeaking sound: If pans made of different materials are used in the neighboring zones of Team A

control zone or Team B control zone, which produced different frequencies squeaking noises can occur .

Selection of pans made from similar materials can reduce or eliminate the noise.

Please use a dedicated Indoor use only Never directly wash the

power switch induction hob in water

To avoid danger.

Never use

the induction hob For sealed food such as After being used for a long

with empty pans as there canned goods, please do not time, the corresponding

is risk of overheating and heat them before opening them heating zone of the hob

damage and the operation to avoid any risk of explosion. will remain hot. Never touch

of the hob may affected. the ceramic surface to avoid burning.

We suggest that you should periodically check that there are no objects (glass, paper,

etc) that could obstruct the inlet under your induction cooker.

Metallic objects such as knives, forks, spoons and lids should not be placed on the

hotplate as they may get very hot.

Never use the induction hotplate in high temperature environments such as near a gas

stove or kerosene stove.

Do not put any detergents or flammable materials in the equipment installed under the

induction hotplate.

If the surface is cracked, switch off the appliance to avoid the possibility of electric

shock.

Do not use damaged pans, or those with rough or distorted bases, they may damage

the ceramic surface and also affect the performance of the induction hob.

Clean the induction hob on a regular basis to prevent foreign matters from entering the

fan thus effecting the normal operation. Refer to “Cleaning and Maintenance” for cleaning methods.

Keep electrical appliances out of the reach of children. Do not let them use the

appliances without supervision.

If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified persons.

DISPOSAL: Do not dispose of this product as unsorted municipal waste. Collection of

such waste separately for special treatment is necessary。

Cleaning and Maintenance

You can easily clean the surface of the induction hotplate by following the methods given in the table

below.

Type of contamination

Method of cleaning

Articles used for cleaning

Light

Wet with hot water then

wipe dry

Cleaning sponge

Accumulation of dirt

Wet with hot water then

wipe it dry with coarse

sponge

Special cleaning sponge for

ceramic glass

Rings and lime crumbles

Apply white vinegar to the

soiled zone, then wipe dry

with soft cloth

Special descaler for ceramic

glass

Burnt on food ,melted

aluminum or plastics

Use a scraper suitable for

ceramic glass (to protect

glass, a silicon product is

preferred) to remove

residue

Special cleaner for ceramic

glass

Always disconnect power before cleaning.

Failure Display and Inspection

If an abnormality occurs, the induction hob will enter the protective state automatically and display

corresponding protective codes:

Problem

Possible reasons

Solutions

Fan failure

Bad hob ventilation

Abnormal temperature

Please restart after the

hotplate cools down.

Please inspect the pan.

Please contact the

supplier.

Temperature sensor

failure

Please contact the

supplier.

Abnormal supply

voltage

Please inspect whether

power supply is normal.

Power on after the power

supply is normal.

Verify if the power supply

interface is secure. After

confirming it is normal,

switch on the induction

hotplate again. If the code

appears constantly,

please contact supplier.

The above are the common failures. Please do not disassemble the unit by yourself to avoid danger

and damage to the induction hob.

Customer Care Service

Before calling the Customer Care Service area, we suggest you check the following:

a) verify if the plug is correctly inserted in the socket

b) read the Failure and Display table above

In case it is not possible to establish the reason for the malfunctioning of the appliance, switch it off and

call the Customer Care Service area.

Special Declaration

a) All the contents in this material have been subjected to careful check.

b) For any mistake and omission in printing or misunderstanding of the contents, the company

maintains the right of interpretation.

c) Any technical or cosmetic improvement may be placed in the revised/future manuals without

notice.

d) Whilst all efforts are made to ensure information at time of purchasing this item is correct, the

manufacturer/supplier bears no responsibility for changes to features, dimensions or cosmetics

of the product listed at the time of purchase.

Andere Belair Kochfeld Handbücher

Belair

Belair HF645-6 Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Bonnet

Bonnet OPTIMUM 700 Betriebsanleitung

Jenn-Air

Jenn-Air JGCP430 Bedienungsanleitung

Frigidaire

Frigidaire FES367FCC Kurzanleitung

Ztove

Ztove EZ2 DUO Bedienungsanleitung

Kleenmaid

Kleenmaid cooking GCTK9011 Installationsanleitung

Casselin

Casselin CSASRE24 Bedienungsanleitung

Jenn-Air

Jenn-Air JGC2536EB00 Bedienungsanleitung

Waldorf

Waldorf RN8603E-B Bedienungsanleitung

Whirlpool

Whirlpool SMP658CNEIXL Bedienungsanleitung

Wolf

Wolf CI243C/B Bedienungsanleitung

Fulgor Milano

Fulgor Milano F5PGK305S1 Bedienungsanleitung

GE JP389 Bedienungsanleitung

Wells

Wells WV-2HFG Bedienungsanleitung

IKEA

IKEA Lagan HGA4K Bedienungsanleitung

Samsung

Samsung NA36N9755 Bedienungsanleitung

Miele

Miele KM 404 Bedienungsanleitung

Lacor

Lacor 69562 Technisches Datenblatt

Keating Of Chicago

Keating Of Chicago MG-2 Bedienungsanleitung