Belden FiberExpress Brilliance LC-SC-ST Stücklistenhandbuch

1. Slide Boot on Fiber 3. Strip off 24 2 mm of Buffer**

4. Mark Buffer at 13 mm 5. Clean Fiber

2. Slide Activator Tab

to the pen Position

Light*MUST

appear

6. Align the end of fiber’s buffer

at 8 mm and cleave

FiberExpress Brilliance®LC-SC-ST Installation Card

For complete details on this procedure refer to Installation Guide PX105234.

*When using a Visual fault Locator (VFL) during termination.

** When using a field cleaver remove 40 mm of buffer.

A copy of the Guide is supplied with each installation it or visit www.belden.com

BootActivator Tab LC connector

900 μm Buffered Fiber

+0.5

-0.0

0 mm

813

To Scale

2012 Belden, Inc.

Printed in Canada

Document Number: PX105273

Release: F

Date: May 2012

8. Create and maintain a bow

with the fiber, while sliding

the Activator Tab

to the Closed Position

7. Insert Fiber Into Connector up to

the 13 mm Buffer Mark.

Warning: DO NOT try to completely

eliminate residual light

9. Install Boot on Connector

SM - Light*

MUST dim

MM - Light*

MUST go out

ST connector

SC connector

9. Insert jacketed connector

into the Support Handle

10. pen the activator tab and insert

fiber into the connector. Refer to point D

for fiber contact distance.

11. Create a bow and slide the activator

tab to the closed position. Then bring

the boot to the rear of the connector.

12. Unclip the connector then create

another bow of 3 mm and maintain it

until next step.

13. Spread the Kevlar around

the threads then gently screw

on boot and release bow

14. Remove connector and

tighten boot (1/4 turn)

3 mm

7. Clean bare fiber 8. Cleave fiber at

8 mm

+0.5

-0.0

1. Mark jacket at points A and B,

then strip jacket at point A*

FiberExpress Brilliance®LC-SC-ST Jacketed Installation Card

This guide assumes that you have read the instruction manual (PX105234) for the complete installation procedure. This document should be used as a reference only.

2. Cut Kevlar off at point A*

3. Strip jacket at point B*4. Insert boot 5. Ensure fiber is fully pushed into

jacket then mark points C, D and E*

6. Wrap around fingers then

mark and strip off at point C*

15 mm 45 mm

15 mm 29 2 mm

15 mm

7 mm

20 mm

2 mm

Jacket Buffer

Fiber

Point E Point D

Point B Point A

Point C

Quick Reference Diagram (lengths to scale)

Field

Cleaver

Precision

Cleaver

Andere Belden Kabel und Steckverbinder Handbücher

Belden

Belden ELWIKA 5012 PG9 Bedienungsanleitung

Belden

Belden HIRSCHMANN BAT-R Bedienungsanleitung

Belden

Belden FiberExpress Brilliance Bedienungsanleitung

Belden

Belden GDS Series Bedienungsanleitung

Belden

Belden FX FUSION SC CONNECTOR Bedienungsanleitung

Belden

Belden Shielded KeyConnect Patch Panel Bedienungsanleitung

Belden

Belden FX FUSION SC CONNECTOR Bedienungsanleitung

Belden

Belden FX ECX Cassette OM4 12P Splice Bedienungsanleitung

Belden

Belden FX FUSION LC CONNECTOR Bedienungsanleitung

Belden

Belden grass valley ICONTROL IC-BASE-EDITION-V3 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung