Belimo Clear Edge EAP005 Bedienungsanleitung

INSTALLATION INSTRUCTIONS

Belimo Clear Edge Device

70730-00001.A

03/19 - Subject to change. © Belimo Aircontrols (USA), Inc.

INSTALLATION / MOUNTING

Front View

Side View

Rear View

Wall Mounted Option

Step 1. Mark and prep holes on surface for mounting

Step 2. Attach mounting bracket to chassis

Step 3. Fasten system to surface

DIN Rail Option

Step 1. Attach DIN rail mounting brackets to chassis

Step 2. Clip system to DIN rail

Power Connection

Connect supplied 12 VDC power adapter to approved power source.

GENERAL WARNINGS

1. Do not open or modify the device. The device uses components

that comply with FCC and CE regulations. Modication of the

device will void these certications.

2. Install the device securely. Be careful handling the device to

prevent injury and do not drop.

3. Wall or ceiling mounting device requires use of a mounting plate or

bracket. Plate or bracket must be of metal construction and have a

minimum thickness of 1mm.

4. Use M3x0.5mm Flat Head screws to attach mounting plate or

mounting brackets to threaded holes on bottom of chassis. Screws

should be minimum length of 4mm. Add 1mm of screw length

for every mm of additional thickness of plate or bracket beyond

1.5mm.

5. Operational temperature must be between 32°F-122°F

[0°C-50°C] with a non-condensing relative humidity of 10-90%.

6. The device can be stored at temperatures between 32°F-122°F

[0°C-60°C].

7. Keep the device away from liquids and flammable materials.

8. Do not clean the device with liquids. The chassis can be cleaned

with a cloth.

9. Allow at least 2 inches of space around all sides of the device for

proper cooling.

Belimo Clear Edge

Quick Start Guide

Quick Start instructions are intended for users that are connecting to the

Belimo Clear Edge.

Supported Hardware

– EAP005, EAP020, EAP050

Default IP Settings

– Port 1: (Congurable)

– IP Address: DHCP

– Port 2: (Service Port)

– IP Address: 100.100.1.100

– Subnet: 255.255.255.0

Default Credentials

– Administrator:

– Username: admin

– Password: Admin

– Operator:

– Username: belimo

– Password: Belimo

Application Details

The default application installed will follow a consistent naming pattern for

uniqueness. This naming convention is as follows: belimoEv<serialNumber>

The UI will display as BelimoEv without the serial number.

Changing IP Settings

1. Plug a network cable from a computer to the Service Port of the device.

Change computer network settings as appropriate to access the

application in a web browser on the IP address provided above.

2. Log in using the admin user.

3. Click the BelimoEv project, then select the IP Cong App.

Port 1

Port 2

Belimo Clear Edge

4. Change the IP settings for Port 1 as required and click submit.

5. Plug the device into the building’s network on Port 1.

Energy Valve Pod Introduction

Your Automated Energy Valve Application includes two Apps.

1. EnergyValveCong – Provides conguration, settings for the installer or

provider.

2. EnergyValve – Provides visualizations for the end-user.

Access to each App can be congured independently through the Host > User

View.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Belimo Steuereinheit Handbücher

Belimo

Belimo ENYE CONTROLS H2 S Series Bedienungsanleitung

Belimo

Belimo Z2050QPT-D Bedienungsanleitung

Belimo

Belimo EPF+MP Series Bedienungsanleitung

Belimo

Belimo EFB Series Referenzhandbuch

Belimo

Belimo F6 Series Bedienungsanleitung

Belimo

Belimo F6 Series Bedienungsanleitung

Belimo

Belimo L Series Bedienungsanleitung

Belimo

Belimo H650SP Bedienungsanleitung

Belimo

Belimo Z2050QPT-F Bedienungsanleitung

Belimo

Belimo Energy Valve EV015R+BAC Gebrauchsanweisung

Belimo

Belimo F6 HS Series Bedienungsanleitung

Belimo

Belimo 6-Way ePIV Bedienungsanleitung

Belimo

Belimo VRU-M1R-BAC Bedienungsanleitung

Belimo

Belimo B2100VB-024 Leitfaden

Belimo

Belimo Z2050Q-J Bedienungsanleitung

Belimo

Belimo BKS24-1B Kurzanleitung

Belimo

Belimo Z2050QS-J Bedienungsanleitung

Belimo

Belimo SHP Series Betriebsanleitung

Belimo

Belimo LRB24-SA Bedienungsanleitung

Belimo

Belimo EPIV Series Produkthandbuch

Belimo

Belimo NMV-D2M Bedienungsanleitung

Belimo

Belimo Z2075Q-K Bedienungsanleitung

Belimo

Belimo ZoneTight Z2050Q-F Bedienungsanleitung

Belimo

Belimo FS Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung