Belkin N1 MIMO Bedienungsanleitung

User Manual

F5D8631-4

N1 MIMO Wireless

ADSL2+ Modem Router

Table of Contents

1. Introduction .................................................................. 1

Advantages of a Wireless Network ................................. 1

Placement of your N1 Wireless Modem Router ............... 3

2. Product Overview ......................................................... 7

Product Features ........................................................... 7

3. Knowing your Modem Router ......................................10

Package Contents ........................................................10

System Requirements ...................................................10

Setup Assistant Software System Requirements .............10

4. Connecting and Configuring your Modem Router ........14

5. Alternate Setup Method ...............................................23

6. Using the Web-Based Advanced User Interface ..........35

Changing LAN Settings ..................................................36

Viewing the DHCP Client List Page ............................... 38

Configuring the Wireless Network Settings ................... 38

Setting WPA Security .....................................................44

Setting WEP Encryption ................................................46

Using the Access Point Mode .......................................48

Setting MAC Address Control ....................................... 49

Configuring the Firewall ................................................51

Using Dynamic DNS ..................................................... 54

Utilities ........................................................................ 56

Restarting the Modem Router ....................................... 57

Updating the Firmware.................................................. 63

7. Manually Configuring Network Settings .......................71

8. Recommended Web Browser Settings .........................77

9. Troubleshooting............................................................79

10. Information ..................................................................95

Introduction

Thank you for purchasing the Belkin N1 MIMO Wireless ADSL2+ Modem

Router (the Modem Router). Following are two short sections—the first

discusses the benefits of home networking, and the other outlines best

practices that maximize your wireless home network range and performance.

Please be sure to read through this User Manual completely, and pay special

attention to the section entitled “Placement of your Wireless Networking

Hardware for Optimal Performance” on the next page. By following our

simple setup instructions you will be able to use your Belkin Home Network

to:

• Share one high-speed Internet connection with all the computers in

your home

• Share resources, such as files and hard drives among all the connected

computers in your home

• Share a single printer with the entire family

• Share documents, music, video, and digital pictures

• Store, retrieve, and copy files from one computer to another

• Simultaneously play games online, check Internet email, and chat

Advantages of a Wireless Network

Here are some of the advantages of setting up a Belkin Wireless Network:

• Mobility – you’ll no longer need a dedicated “computer room”—now

you can work on a networked laptop or desktop computer anywhere

within your wireless range

• Easy installation – Belkin’s Easy Installation Wizard makes setup simple

• Flexibility – set up and access printers, computers, and other

networking devices from anywhere in your home

• Easy expansion – the wide range of Belkin networking products let you

expand your network to include devices such as printers and gaming

consoles

• No cabling required – you can spare the expense and hassle of

retrofitting Ethernet cabling throughout the home or office

• Widespread industry acceptance – choose from a wide range of

interoperable networking products

Introduction

section

Revolutionary N1 Wireless Technology with MIMO (N1 MIMO)

Your Belkin N1 Wireless Modem Router uses a new smart-antenna

technology called Multiple Input Multiple Output (MIMO). N1 MIMO

complies with the IEEE draft 802.11n specification. It increases

speed, range, reliability, and spectral efficiency for wireless

networking systems.

The element that makes Belkin’s N1 MIMO technology different

from a conventional radio is the use of multiple antennas and two

simultaneous data streams to deliver wireless transfers around your

home or office. A conventional radio uses one antenna to transmit

a data stream. Belkin’s N1 MIMO, on the other hand, uses three

antennas. This design helps combat distortion and interference.

Belkin’s N1 MIMO is multidimensional. It builds on one-dimensional

smart-antenna technology by simultaneously transmitting two data

streams through the same channel, which increases

wireless capacity.

Another element that enhances Belkin’s N1 MIMO is the use of

aggregation as specified in the draft 802.11n specification.

By shortening the space between packets and combining multiple

smaller packets into one larger packet, Belkin’s N1 MIMO can

transmit more data through available bandwidth.

Think of conventional radio transmission as a two-lane highway. The

speed limit governs the maximum allowable flow of traffic through

that lane. Compared with conventional radios, one-dimensional smart

antenna systems help move traffic through that lane faster and more

reliably—analogous to a four-lane road on which traffic consistently

moves at a rate closer to the speed limit. Belkin’s N1 MIMO helps

traffic move at the speed limit and opens more lanes—to become the

superhighway in this example. The rate of traffic flow is multiplied by

the number of lanes that are opened.

Introduction

Placement of your N1 MIMO Wireless Modem Router

Important Factors for Placement and Setup

Your wireless connection will be stronger the closer your computer is to

your Modem Router. Typical indoor operating range for wireless devices

is between 100 and 200 feet.

In the same way, your wireless connection and performance will degrade

somewhat as the distance between your Modem Router and connected

devices increases. This may or may not be noticeable to you. As you

move further from your Modem Router, connection speed may decrease.

Factors that can weaken signals simply by getting in the way of your

network’s radio waves are metal appliances or obstructions, and walls.

If you have concerns about your network’s performance that might be

related to range or obstruction factors, try moving the computer to a

position between five and 10 feet from the Modem Router in order to

see if distance is the problem. If difficulties persist even at close range,

please contact Belkin Technical Support.

Note: While some of the items listed below can affect network

performance, they will not prohibit your wireless network from

functioning; if you are concerned that your network is not operating at

its maximum effectiveness, this checklist may help.

1. Modem Router Placement

Place your Modem Router, the central connection point of your network,

as close as possible to the center of your wireless network devices.

To achieve the best wireless network coverage for your “wireless clients”

(i.e., computers enabled by Belkin Wireless Notebook Network Cards,

Wireless Desktop Network Cards, and Wireless USB Adapters):

• Ensure that your Modem Router’s networking antennas are parallel

to each other, and are positioned vertically (toward the ceiling).

If your Modem Router itself is positioned vertically, point the

antennas as much as possible in an upward direction.

• In multistory homes, place the Modem Router on a floor that is as

close to the center of the home as possible. This may mean placing

the Modem Router on an upper floor.

• Try not to place the Modem Router near a cordless 2.4GHz phone.

Introduction

section

2. Avoid Obstacles and Interference

Avoid placing your Modem Router near devices that may emit radio

“noise,” such as microwave ovens. Dense objects that can inhibit

wireless communication include:

• Refrigerators

• Washers and/or dryers

• Metal cabinets

• Large aquariums

• Metallic-based, UV-tinted windows

If your wireless signal seems weak in some spots, make sure that

objects such as these are not blocking the signal’s path (between

your computers and Modem Router).

3. Cordless Phones

If the performance of your wireless network is impaired after

attending to the above issues, and you have a cordless phone:

• Try moving cordless phones away from your Modem Router and

your wireless-enabled computers.

• Unplug and remove the battery from any cordless phone that

operates on the 2.4GHz band (check manufacturer’s information).

If this fixes the problem, your phone may be interfering.

• If your phone supports channel selection, change the channel on

the phone to the farthest channel from your wireless network.

For example, change the phone to channel 1 and move your

Modem Router to channel 11. See your phone’s user manual for

detailed instructions.

• If necessary, consider switching to a 900MHz or

5GHz cordless phone.

4. Choose the “Quietest” Channel for your Wireless Network

In locations where homes or offices are close together, such as

apartment buildings or office complexes, there may be wireless

networks nearby that can conflict with yours.

Use the Site Survey capabilities found in the Wireless Utility of your

wireless adapter to locate any other wireless networks that are

available (see your wireless adapter’s user manual), and move your

Modem Router and computers to a channel as far away from other

networks as possible.

Introduction

• Experiment with more than one of the available channels, in order to

find the clearest connection and avoid interference from neighboring

cordless phones or other wireless devices.

• For Belkin wireless networking products, use the detailed Site Survey

and wireless channel information included with your wireless network

card. See your network card’s user guide for more information.

These guidelines should allow you to cover the maximum possible area

with your Modem Router. Should you need to cover an even wider area,

we suggest the Belkin Wireless Range Extender/Access Point.

5. Secure Connections, VPNs, and AOL

Secure connections typically require a user name and password, and

are used where security is important. Secure connections include:

• Virtual Private Network (VPN) connections, often used to connect

remotely to an office network

• The “Bring Your Own Access” program from America Online (AOL),

which lets you use AOL through broadband provided by another

cable or DSL service

• Most online banking websites

• Many commercial websites that require a user name and password

to access your account

Secure connections can be interrupted by a computer’s power

management setting, which causes it to “go to sleep.” The simplest

solution to avoid this is to simply reconnect by rerunning the VPN or

AOL software, or by re-logging into the secure website.

A second alternative is to change your computer’s power

management settings so it does not go to sleep; however, this may

not be appropriate for portable computers. To change your power

management setting under Windows, see the “Power Options” item in

the Control Panel.

If you continue to have difficulty with Secure Connections, VPNs, and

AOL, please review the steps above to be sure you have addressed

these issues.

Introduction

section

Free Tech Support*

You can find additional support information on our website

www.belkin.com/anz through the tech-support area.

If you want to contact technical support by phone, please call the

number you need from the list below*.

Australia - 1800 BELKIN

New Zealand - 0800 BELKIN

Product Overview

Product Features

In minutes you will be able to share your Internet connection and

network your computers. The following is a list of features that make

your new Belkin N1 Wireless Modem Router an ideal solution for your

home or small office network.

Works with Both PCs and Mac®Computers

The Modem Router supports a variety of networking environments

including Mac OS®8.x, 9.x, X v10.x, Linux®, Windows®98, Me, NT®,

2000, and XP, and others. All that is needed is an Internet browser

and a network adapter that supports TCP/IP (the standard language of

the Internet).

Patent-Pending Network Status Display

Lit LEDs on the front of the Modem Router indicate which functions are

in operation. You’ll know at-a-glance whether your Modem Router is

connected to the Internet. This feature eliminates the need for advanced

software and status-monitoring procedures.

Web-Based Advanced User Interface

You can set up the Modem Router’s advanced functions easily through

your web browser, without having to install additional software onto the

computer. There are no disks to install or keep track of and, best of all,

you can make changes and perform setup functions from any computer

on the network quickly and easily.

NAT IP Address Sharing

Your Modem Router employs Network Address Translation (NAT) to

share the single IP address assigned to you by your Internet Service

Provider while saving the cost of adding additional IP addresses to your

Internet service account.

SPI Firewall

Your Modem Router is equipped with a firewall that will protect your

network from a wide array of common hacker attacks including IP

Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP

with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding,

Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding.

Product Overview

section

Integrated 10/100 4-Port Switch

The Modem Router has a built-in, four-port network switch to allow

your wired computers to share printers, data and MP3 files, digital

photos, and much more. The switch features automatic detection so it

will adjust to the speed of connected devices. The switch will transfer

data between computers and the Internet simultaneously without

interrupting or consuming resources.

Universal Plug and Play (UPnP)

UPnP is a technology that offers seamless operation of voice

messaging, video messaging, games, and other applications that

are UPnP-compliant.

Support for VPN Pass-Through

If you connect to your office network from home using a VPN

connection, your Modem Router will allow your VPN-equipped computer

to pass through the Modem Router and to your office network.

Built-In Dynamic Host Configuration Protocol (DHCP)

Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes

for the easiest possible connection of a network. The DHCP server

will assign IP addresses to each computer automatically so there is no

need for a complicated networking setup.

Setup Assistant

The Setup Assistant, second generation of Belkin’s renowned Easy

Install Wizard, takes the guesswork out of setting up your Modem

Router. This automatic software determines your network settings for

you and sets up the Modem Router for connection to your Internet

Service Provider (ISP). In a matter of minutes, your Modem Router will

be up and running on the Internet.

Note: Setup Assistant software is compatible with Windows 2000 and

XP. If you are using another operating system, the Modem Router can

be set up using the Alternate Setup Method described in this User

Manual (see page 23).

Andere Handbücher für N1 MIMO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Belkin WLAN-Router Handbücher

Belkin

Belkin F5D6231-4 - Wireless Cable/DSL Gateway... Bedienungsanleitung

Belkin

Belkin N1 WIRELESS ROUTER P75170EI Bedienungsanleitung

Belkin

Belkin F9K1107 Bedienungsanleitung

Belkin

Belkin F9K1105 Bedienungsanleitung

Belkin

Belkin 8820AU00370 Bedienungsanleitung

Belkin

Belkin F5D7632EA4A Bedienungsanleitung

Belkin

Belkin F9K1107au 8820au00920 Rev. A00 Bedienungsanleitung

Belkin

Belkin F6D4230-4 Bedienungsanleitung

Belkin

Belkin F5D7230-4 Bedienungsanleitung

Belkin

Belkin F5D7230-4 Bedienungsanleitung

Belkin

Belkin F5D8230-4 Bedienungsanleitung

Belkin

Belkin AC1900 DB Bedienungsanleitung

Belkin

Belkin F5D8231-4 - N1 Wireless Router Kurzanleitung

Belkin

Belkin F5D7230-4 Bedienungsanleitung

Belkin

Belkin F9K1108v1 8820-00973 Rev. A00 Bedienungsanleitung

Belkin

Belkin AX3200 Bedienungsanleitung

Belkin

Belkin Enhanced Wireless Modem Router Bedienungsanleitung

Belkin

Belkin F5D7230-4 Bedienungsanleitung

Belkin

Belkin F5D7230-4 Bedienungsanleitung

Belkin

Belkin F5D6230-3 Referenzhandbuch

Belkin

Belkin F5D7233au Bedienungsanleitung

Belkin

Belkin N600 DB Bedienungsanleitung

Belkin

Belkin F5D92304 - Wireless G Plus MIMO Router Bedienungsanleitung

Belkin

Belkin AC750 DB Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung