Bell'O 8335 Bedienungsanleitung

English

Introduction

Congratulations on your decision to mount your TV with a TV Wall Mounting Kit For

Dummies. The enclosed mounting bracket was engineered and designed by Bell’O

International Corporation using the latest computer-aided design and stress-analysis

software to ensure safety and durability when installed according to the instructions. It

has been further tested and Listed by Underwriters Laboratories.

About This Manual

Mounting your TV on the wall can seem like an overwhelming task. This handy For Dummies®

guide takes you through the process step-by-step to ensure the proper installation of your

mount. Before starting this project, be sure to read the entire instruction manual and watch the

included installation DVD for a complete demonstration. If at any time you are unclear about

the directions and believe you need further assistance, contact the Bell’O®installation experts

at 888-779-7781 from 9am – 5pm EST.

Icons Used in This Book

Don’tbe alarmed by the bomb in the icon. We just want to

get your attention because making an error could be costly.

This is not really very technical stuff, just some details you

need to really pay attention to.

Foolish Assumptions

Although our easy-to-install mounts and instructions simplify the process, mounting your

TV still requires great care. Weassume you’re someone who, at minimum, has done odd

jobs around the house and has some basic tools. You don’t need to be a master carpenter or

electrician to install this mount. With that said, if at any time you feel that you are

uncertain or uncomfortable with doing the installation yourself, don’t hesitate to call on a

handyman or professional contractor/installer.

English

NEVER exceed the maximum load capacity of 280 lbs (127 kg)

Precautions!

•This mounting bracket was designed to be installed and utilized ONLY

as specified in this manual. Bell’O International Corporation will not

be responsible for failure to assemble as directed or for the improper

assembly, use, or handling of this product.

•Improper installation of this product may cause damage or serious

injury. Bell'O International Corporation cannot be liable for direct or

indirect damage or injury caused by incorrect mounting, incorrect

use, or incorrect assembly.

•If the mounting bracket will be attached to any structure other than

those specified in this manual, only a licensed professional

contractor/installer should perform this installation. The supporting

structure must support, at minimum, four times the combined weight

of the mounting bracket and TV. It is the responsibility and liability of

the installer to ensure the suitability of the supporting structure.

•This product should NEVER be mounted to metal framing studs.

•Check carefully to ensure that there are no missing or damaged parts.

Never use defective parts. If any parts are damaged or missing, call

Bell'O International Corporation at 888-779-7781 and parts will be

shipped directly to purchaser. Please contact Bell’O International Corp.

beforeattempting to returnproducts to the point of purchase.

•Specifications are subject to change without notice.

•The maximum weight of your television cannot exceed the maximum

weight rating of your mount or any attached Bell'O®UL listed adapters

sold separately, whichever is lower.

(WP) Wall Plate (with Left & Right Extensions), Qty: 1

(EC) End Covers, Qty: 2

(ME) Arm Extensions, Qty: 4

Parts Included in This Kit

(MA) Monitor Arms, Qty: 2

English

(IT) Installation Template, Qty: 1

(IG) Installation Guide

&DVD, Qty: 1 each

Quite possibly the world’s

easiest mounts to install!

For 8335Mounting Bracket

English Français Español

Installation Guide for

TV Wall Mounting Kit

A step-by-step guide for

mounting your flat panel

TV safely and easily!

Installation Video for

Bell’O TV Wall Mounting Kits

’

A step-by-step guide for

mounting your flat panel

TV safely and easily!

Wiley,the Wiley logo,For Dummies,

theDummies Man logo,and

relatedtrademarks or registered

trademarksof John Wi ley&Sons, Inc.

and/oritsaffiliates. U sed by license.

Video: 701

Bell’O InternationalCorp.

711 GinesiDrive

Morganville, NJ 07751

English

Parts Included in This Kit (continued)

(A) M4 x 12mm Screw, Qty: 4

(B) M4 x 22mm Screw, Qty: 4

(G) M5 x 12mm Screw, Qty: 4

(H) M5 x 22mm Screw, Qty: 4

(I) M5 x 30mm Screw, Qty: 4

(J) M6 x 14mm Screw,Qty: 4

(K) M6 x 25mm Screw,Qty: 4

(L) M6 x 35mm Screw,Qty: 4

(S) M6/M8 Washer,

Qty: 4

(R) M4/M5 Washer,

Qty: 4

(AB)

M4 x

10mm Security Screw, Qty: 2

(M) M8 x 20mm Screw,Qty: 4

(N) M8 x 30mm Screw,Qty: 4

(O) M8 x 40mm Screw,Qty: 4

(AF) M8 Nut,

Qty: 8

Parts Included in This Kit (continued)

TOGGLER®brand ALLIGATOR®SOLID-WALL ANCHORS are patented under one or more of US Patent numbers

5,161,296 and 5,938,385; and foreign counterparts thereof and of 4,752,170. Other patents pending.

TOGGLER and ALLIGATOR are worldwide registered trademarks of Mechanical Plastics Corporation.

English

(Q) M6/M8 Short

Spacer, Qty: 4

(P) M6/M8 Long Spacer,

Qty: 4

(D) M4/M5 Short

Spacer, Qty: 4

(E) M4/M5 Long

Spacer, Qty: 4

(U) TOGGLER®brand AF8 ALLIGATOR®Anchor, Qty: 6

(T) #14 X 64mm

Lag Bolt, Qty: 6

Tools You Will Need

Screwdriver Stud Finder Drill Drill Bit

For wood 5/32" (4mm)

For masonry 5/16" (8mm)

Metric Ratchet

Set

Masking Tape Pencil Tape Measure

Level

Getting ready to hang the TV

Select the location where you want to mount the TV. Clear the area of all furniture and

electronics. You will need some elbow room to mount the TV. You also want to make sure

that your electronic devices are unplugged, covered, and out of way because you are about

to start drilling holes, and that is likely to make dust. You will also need to leave space that

you can use to mount the Monitor Arms (MA) onto the TV.

Your TV may have come with a stand installed. If it did, it is okay to leave it on for

now as long as it does not interfere with the monitor arm installation. If not, you need

to determine the best way to hold or rest your TV safely so you can attach the

monitor arms. Placing the TV face-down can damage the fragile screen or decorative

frame. You may want to get a friend to assist you in holding the TV.If you are

uncertain of the safest way to do this, call the TV manufacturer for advice.

English

Tools You Will Need (continued)

Step 1: Attaching the Adjustable Arms

Your TV owner’s manual generally explains where the mounting location is on the TV.

There are several typical mounting configurations for this size bracket. The mounting hole

distances are measured in millimeters per the VESA (Video Electronics Standards

Association) specifications.

Who is VESA?

The Video Electronics Standards Association is an international nonprofit organization

representing hardware, software, PC, display, and component manufacturers, cable and

telephone companies, and service providers. VESA supports and sets industry-wide

interface standards for the PC, workstation, and computing environments.

Deciding whether you need the Arm Extensions

If you are installing a large TV, you may need to use the supplied Arm Extensions (ME) to

reach the mounting configuration holes on the back of your monitor. To determine if you

need to use the arm extensions, simply hold one of the Monitor Arms (MA) up to the back

of the TV cabinet to see whether the arms can reach the holes. If they do not (as shown in

Figure 1), then you need to attach the extensions to the arms. If the arms reach the holes,

you may skip the next step.

English

Figure 1

Attaching the Arm Extensions

Secure an Arm Extension (ME) to the

top and bottom of each Monitor Arm

(MA) using two of the M8 Nuts (AF)

for each extension as shown in Figure 2.

Use the measurement of the distance

between the screw holes as a guide for

determining how to place the arm

extensions on the monitor arms. Make

sure all four nuts are tightened fully

before moving on.

Figure 2

English

Choosing which screws to use for your TV

You’re probably wondering why so many screws came with this mount. The screw sizes

follow the standards setup by VESA for each mounting configuration.

Most monitors have the mounting holes flush with the back of the monitor. If yours is

like this, you likely need to use short screws. Test several of the screws included in this

kit to find the correct match for the holes in the back of your TV.

Don’t use screws that are too long because they will not fully seat in the holes

and can permanently damage the TV or mounting holes and cause the monitor

to come loose.

Ror S

Selected Screw

DETAILED VIEW

Back

of TV

Figure 3

Attaching the Monitor Arms

After you’ve figured out which screws to use for your TV, attach each Monitor Arm

(MA) to the back of the TV as shown in Figures 3 and 4. Make sure that the arms are

oriented properly, with the adjustment levers facing toward the outer edge of the TV so

that you can reach them later.

Also make sure that each Washer (R for M4 or M5 screws, or S for M6 or M8 screws)

is placed between the screw and the monitor arm. Don’tplace the washers between the

arms and the TV.

Ror S

Selected

Long Screw

Selected

Spacer

English

DETAILED VIEW

Back of TV

Figure 4

Some TVs have mounting holes that are recessed. This kit includes longer mounting

screws and Spacers

(D or E for M4 and M5 screws; P or Q for M6 and M8 screws)

for

such instances. The spacers are used to take up the space in the recessed hole as shown in

Figure 4. The spacer you select must stick out past the back of the TV to ensure secure

mounting. You don’t want the spacer to be loose. The Monitor Arms (MA) need to rest

securely on the spacers.

Test several of the spacers included in this kit to find the

correct match for the recessed holes in the back of your TV.

Inhaltsverzeichnis

Andere Bell'O TV-Halterung Handbücher

Bell'O

Bell'O TRIPLE PLAY TP4444 Bedienungsanleitung

Bell'O

Bell'O 7420 Bedienungsanleitung

Bell'O

Bell'O 8220 Bedienungsanleitung

Bell'O

Bell'O SFP-9901HG Bedienungsanleitung

Bell'O

Bell'O PP-59 Bedienungsanleitung

Bell'O

Bell'O 7410 Bedienungsanleitung

Bell'O

Bell'O SFP-9901HG Bedienungsanleitung

Bell'O

Bell'O 8160 Bedienungsanleitung

Bell'O

Bell'O Triple Play TPC2128 Bedienungsanleitung

Bell'O

Bell'O FP-2125 Bedienungsanleitung

Bell'O

Bell'O 7842 Bedienungsanleitung

Bell'O

Bell'O Triple Play NTPC2132G Bedienungsanleitung

Bell'O

Bell'O TRIPE PLAY TPC2143 Bedienungsanleitung

Bell'O

Bell'O Triple Play TPC2128 Bedienungsanleitung

Bell'O

Bell'O PP-59 Bedienungsanleitung

Bell'O

Bell'O 7640 Bedienungsanleitung

Bell'O

Bell'O FP-4850HG Bedienungsanleitung

Bell'O

Bell'O Triple Play TP4452 Bedienungsanleitung

Bell'O

Bell'O 8315 Bedienungsanleitung

Bell'O

Bell'O 8210 Bedienungsanleitung

Bell'O

Bell'O 7610 Bedienungsanleitung

Beliebte TV-Halterung Handbücher anderer Marken

Ergotron

Ergotron Neo Flex Cantilever UHD Bedienungsanleitung

StarTech.com

StarTech.com FPCEILBTB Bedienungsanleitung

VonHaus

VonHaus 05/038 Bedienungsanleitung

Techlink

Techlink ECHO TV Bedienungsanleitung

Sandstrom

Sandstrom SSTVMC12X Bedienungsanleitung

Sony

Sony SU-WL700 Leitfaden

ICW

ICW SCACC18 Bedienungsanleitung

LG WM-L640V Bedienungsanleitung

Gembird

Gembird WM-65ST-01 Bedienungsanleitung

ERARD

ERARD FiTUP XXL 035320 Bedienungsanleitung

PEERLESS

PEERLESS PLCK-1 Leitfaden

Kanto

Kanto RCF180 Bedienungsanleitung

GEM

GEM GEM GP001 Bedienungsanleitung

Gladiator Joe

Gladiator Joe GJ0A0053 Bedienungsanleitung

Vivotek

Vivotek AM-105 Bedienungsanleitung

Vivo

Vivo VESA STAND-VAD1B Bedienungsanleitung

AmazonBasics

AmazonBasics B07QG3LMG4 Bedienungsanleitung

Secura

Secura QLF210 Bedienungsanleitung