Bell Turbo Stick Bedienungsanleitung

Getting started guide

Turbo Stick

LTE® Novatel Wireless™ U679

Welcome

Thank you for purchasing a Turbo Stick from Bell. This guide provides an

overview of your new Turbo Stick and details on how to configure your

computer for use with this Turbo Stick.

Account Requirements ................................................ 2

System Requirements ................................................3

Inserting your Bell SIM card ...........................................4

Preparing your computer for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

• Installing Mobile Connect for Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

• Installing Mobile Connect for Macintosh. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Starting Mobile Connect .............................................10

Using your Turbo Stick ...............................................11

How much data do I need? ............................................12

Hardware overview ................................................. 14

Inserting and removing your Turbo Stick from your computer . . . . . . . . . . . 16

Unblocking a SIM card ............................................... 18

Troubleshooting ..................................................... 19

Account Requirements

Before installing your Turbo Stick, please ensure you have the following:

• A Bell wireless account with a Mobile Internet plan. (If you don’t

have an account or a Mobile Internet plan, speak with a Bell account

representative to get set up.)

• An active Bell SIM card.

• Your Mobile Directory Number (MDN),

or phone number __________________________________ .

System Requirements

To install and operate your Turbo Stick, ensure your computer has the

following minimum system resources:

For more information visit www.bell.ca/mobileconnect

WINDOWS

Operating System Windows® XP (32-Bit); Windows® Vista (32/64-Bit);

Windows® 7 (32/64-Bit)

USB Port Type A, v1.1 supported; v2.0 high speed recommended

COM Ports 4 free COM ports

I/O Resources 1 IRQ, 4096 bytes of I/O space

RAM Memory 128 MB

Disk Space 100 MB

MACINTOSH

Operating System Mac OS® X 10.4.11, 10.5, 10.6

USB Port Type A, v1.1 supported; v2.0 high speed recommended

RAM Memory 128 MB

Disk Space 100 MB

Inserting your Bell SIM card

Your Turbo Stick requires an activated Bell SIM card to function. If the

SIM card was not inserted at the time of purchase, please insert it now,

as described below.

1. Open the protective cover. Look for a small divot at the end of the back

panel closest to the USB connector, into which you can insert a fingernail.

2. Insert the SIM card with the contact points (typically gold-coloured)

facing toward the device. Position the card with the notched corner as

circled below and slide the card into the slot.

3. Gently push the SIM card forward until the spring catches and the card

remains securely in the slot.

4. Replace the back panel on the device.

TIP: To remove the SIM card simply use a paper clip to aid pushing the

SIM card out, ensuring that the spring is pressed down.

Preparing Your Computer for Installation

Mobile Connect from Bell is a program that allows you to set up and

manage your wireless connections over the Bell network.

Mobile Connect for Windows and Macintosh is pre-loaded onto your

Turbo Stick and can be installed directly from it to your computer

– no CD required.

Before inserting your Turbo Stick into the computer:

1. If you are already using a wireless connection manager (such as

Mobilink), or have it installed on the computer, you should uninstall the

program and restart before inserting your new Turbo Stick.

2. Ensure that computer security software (antivirus and firewall programs)

are set to allow software installation.

3. Ensure that you have Administrator Rights and the login user name and

password before attempting to install – check your computer’s Help files

for details.

Installing Mobile Connect for Windows

Insert your Turbo Stick into an available USB port on your computer.

Do not forcibly insert your Turbo Stick as this may damage both the

device and the port. Your Turbo Stick powers on when inserted, and your

computer may beep.

Note: Your computer may display a security warning stating

that Mobile Connect is not a trusted application. You may safely

dismiss this warning and continue with the installation.

Installation should automatically begin. However, you may be prompted to

install Mobile Connect. Select Install/Run Mobile Connect.

If the auto install fails to start, remove your Turbo Stick and use an

alternate Internet connection to download and install the software from

our website at bell.ca/mobileconnect before inserting your Turbo Stick,

or you can manually install the software from your Turbo Stick by:

1. Selecting Start > Run > Browse...

2. Look in “My Computer” to find your Turbo Stick disk drive

3. Run the file “mobileconnect.exe”

Note: The drive letter assigned to your Turbo Stick by the computer’s

operating system will be the next available drive letter (e:\, f:\, g:\, etc.).

Follow the InstallShield® Wizard, it will guide

you through the process of installing the

Mobile Connect application.

Use the “Next” and “Back” buttons to navigate

through the installation steps.

To continue the installation, you must read and

accept the terms of the License Agreement.

The installation process may take several

minutes to complete with no progress shown

on the progress bar – please be patient.

Select “Finish” to complete the installation.

Once the installation is complete, you may

need to restart your computer. If a restart is

not required, Mobile Connect will launch

automatically. If your computer restarts,

launch Mobile Connect by double-clicking

on the Mobile Connect icon.

Installing Mobile Connect for Macintosh

Insert your Turbo Stick into an available USB port on your computer.

Do not forcibly insert the device as this may damage both the device

and the port. Your Turbo Stick automatically powers on when inserted.

Your Turbo Stick will appear as a CD-ROM drive on your desktop.

Double-click the CD-ROM icon, then find

and drag the “Mobile Connect.dmg” image

to your desktop.

Double-click the “mobileconnect.dmg” file

and then double-click the “Install Mobile

Connect.mpkg” file to launch the

installation program.

Follow the step-by-step instructions to

install the software drivers for your

Turbo Stick, you must read and click

“Agree” to accept the terms of the License

Agreement to continue the installation.

You may need to enter your name and

password, and restart your computer,

during the installation process.

If your Turbo Stick was removed during installation, reinsert. Do not

forcibly insert the device as this may damage both the device and the

USB port.

You may be prompted to set your network preferences for this new

network interface. Click “Network Preferences” and then select “Apply”

to continue and finish the installation.

Andere Handbücher für Turbo Stick

Inhaltsverzeichnis

Andere Bell Modem Handbücher

Bell

Bell 103A Bedienungsanleitung

Bell

Bell Novatel Wireless U679 Bedienungsanleitung

Bell

Bell 3G Novatek Wireless U760 USB modem Bedienungsanleitung

Bell

Bell U950 Turbo Stick Bedienungsanleitung

Bell

Bell Turbo Stick Bedienungsanleitung

Bell

Bell 5902 Bedienungsanleitung

Bell

Bell Novatek Wireless U760 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung