GSM Sales Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 www.belliniappliances.com.au
Model: BRE133BI Fineline: 5104015 Built-In Drawer Refrigerator
Do not use damaged appliances. If you are in doubt, consult an authorised
service agent.
Connecon and installaon of the refrigerator is to be carried out in strict
compliance with the relave instrucons in this manual.
Do not damage any parts of the appliance which carry refrigerant by piercing,
perforang, crushing, twisng or scraping. If the refrigerant comes into contact
with the eyes, it may cause serious eye injury.
Always remember to unplug the appliance before cleaning. Never unplug the
appliance by pulling on the power cable. Always switch o the appliance at the
power socket, grip the plug rmly and pull the plug straight out of the socket.
Always check that the plug and cable are undamaged.
All repairs must be made by the manufacturer, its service agent or similarly
qualied service technician. Inadequate repairs may be dangerous. Never try to
repair the appliance yourself.
Should the cover of the interior light fall o or break, immediately switch o
the appliance and replace the cover.
Ensure the locaon has a at, level and stable surface. The appliance may be
levelled by turning either or both of the adjustable feet in the front corners.
Check that the appliance is level using a spirit level. Foot adjustable dimensions
minimum 16mm, maximum 24mm. Appliance dimensions
600mmWx600mmDx865mmH
Do not obstruct or cover the venlaon aperture.
Do not posion the appliance with its rear panel directly against a wall.
Maintain a gap of at least 50mm between the appliance and any adjacent wall.
Posion the appliance away from heat sources, ensure the appliance is well
venlated and protected from moisture or extremes of heat or cold.
The appliance may not funcon properly if the temperature rises above +30OC
(standard model).
Do not allow children to play with the appliance, or sit on it or to hang on to the
door(s) or drawers.
Ensure the power point is properly earthed to ground. Consult a qualied
electrician if you are unsure.
Page 3
