Benchmark 5240-050 Bedienungsanleitung

60V 16-INCH CORDLESS

CHAINSAW

READ ALL INSTRUCTIONS BEFORE FIRST USE.

KEEP THIS MANUAL FOR FUTURE REFERENCE.

KEEP AWAY FROM CHILDREN.

Maximum initial battery voltage (measured without a load)

is 60 volts. Normal voltage is 54 volts.

WEAR CSA APPROVED

EYE PROTECTION

WEAR EAR

PROTECTION

WEAR A

FACE MASK

5 Year Limited Warranty on tool

3 Year on battery and charger

PRODUCT SPECIFICATIONS

60V 16-INCH CORDLESS CHAINSAW

Sku No. 5240-050

Nominal Voltage of 60 v d.c. / 2.5 Ah Li-ion

Chain Speed 33 ft./s

Cutting Length 16 in. (400 mm)

Chain Type Recommended Oregon type 90PX056X

Guide Bar Type Recommended Oregon type 164MLEA041

Weight 17 lbs 17 lbs

Battery Pack Model 5350-018

Battery Capacity 60 V DC, 2.5 Ah

Battery Charger Model 5350-020

Input 100–240 V~, 50/60 Hz, 150 W

Output 63 V d.c., 2.5 A

NEED ASSISTANCE?

Call us on our toll-free customer support line:

1-833-818-4111

• Technical questions

• Replacement parts

• Parts missing from package

BENCHMARK 60V HAND-HELD TOOL HAS A 2-STEP BATTERY LATCH

INSTALLATION: The battery latch has 2

positions. Press down ﬁrmly until battery

is fully inserted. If the battery is not fully

inserted and secured in the deepest

position #2 the tool will not run.

REMOVAL: Press the release button

once, the battery will release from the

ﬁrst latch position. Then hold the battery

ﬁrmly, press the release button again

and pull battery out.

Latch #2

Latch #1

60V 16-INCH CORDLESS CHAINSAW 5240-050

TABLE OF CONTENTS

Product Speciﬁcations................................................................................... 1

Benchmark 60V Hand-held Tool has a 2-Step Battery Latch ........................... 1

Table of Contents .......................................................................................... 2

General Safety Instructions ........................................................................... 4

Eye, Ear & Lung Protection ............................................................................ 4

Safety Symbols ............................................................................................. 5

Safety Instructions ........................................................................................ 5

Power Tool Safety .......................................................................................... 7

Work Area Safety .......................................................................................... 7

Electrical Safety ............................................................................................ 7

Personal Safety ............................................................................................. 7

Power Tool Use and Care ............................................................................... 8

Battery Tool Use and Care ............................................................................. 8

Service ......................................................................................................... 9

Speciﬁc Safety Instructions for Chainsaw ...................................................... 9

Causes And Operator Prevention of Kickback .............................................. 10

Kickback Safety Devices on This Chainsaw Chain ........................................ 11

Brake .......................................................................................................... 11

Low Kickback Saw Chain ............................................................................. 12

Guide Bar ................................................................................................... 12

Additional Warnings .................................................................................... 12

Technical Data ............................................................................................ 15

Functions .................................................................................................... 15

Delivery Parts .............................................................................................. 16

Installation .................................................................................................. 16

Install the Guide Bar and Saw Chain ............................................................ 16

Adjusting the Chain Tension ........................................................................ 17

Filling Bar and Chain Lubricant Oil ............................................................... 18

Charging the Battery Pack ........................................................................... 18

Power Indicator ........................................................................................... 19

To Obtain the Best Life From the Battery ..................................................... 19

Inserting and Removing the Battery Pack .................................................... 19

Insert the Battery Pack ................................................................................ 20

Remove the Battery Pack ............................................................................ 20

Starting/Stopping the Chainsaw .................................................................. 20

To Start ....................................................................................................... 21

To Stop ....................................................................................................... 21

Indicator Panel ............................................................................................ 21

Proper Grip on Handles ............................................................................... 22

Proper Cutting Stance ................................................................................. 22

Instructions Concerning the Proper Techniques for Basic Felling,

Limbing, and Cross-Cutting ......................................................................... 22

Felling a Tree .............................................................................................. 22

Latch #2

Latch #1

Removing Buttress Roots ............................................................................ 24

Bucking a Log ............................................................................................. 24

Limbing a Tree ............................................................................................ 25

Maintenance and Storage ........................................................................... 26

Cleaning ..................................................................................................... 26

Replacing the Bar and Chain ....................................................................... 26

Disassemble the Worn Bar and Chain .......................................................... 27

Assemble the New Bar and Chain ................................................................ 27

Adjust the Chain Tension ............................................................................. 27

Chain Maintenance ..................................................................................... 27

Guide Bar Maintenance ............................................................................... 28

Transporting and Storing ............................................................................. 28

Troubleshooting........................................................................................... 29

Warranty ..................................................................................................... 29

GENERAL SAFETY INSTRUCTIONS

WARNING: Before using this tool or any of its accessories, read this manual

and follow all Safety Rules and Operating Instructions. The important precautions,

safeguards and instructions appearing in this manual are not meant to cover all

possible situations. It must be understood that common sense and caution are

factors which cannot be built into the product.

EYE, EAR & LUNG PROTECTION

SYMBOL MEANING

ALWAYS WEAR EYE PROTECTION THAT CONFORMS

WITH CSA Z94.3 or ANSI SAFETY STANDARD Z87.1

FLYING DEBRIS can cause permanent eye damage.

Prescription eyeglasses ARE NOT a replacement for proper

eye protection. The usage of a safety standard compliant

face shield placed over proper safety glasses or goggles

can reduce the risk of facial injury.

Non-compliant eyewear can cause serious injury if broken

during the operation of a power tool.

Use hearing protection, particularly during extended periods

of operation of the tool, or if the operation is noisy.

WEAR A DUST MASK THAT IS DESIGNED TO BE

USED WHEN OPERATING A POWER TOOL IN A

DUSTY ENVIRONMENT.

Dust that is created by power sanding, sawing, grinding,

drilling, and other construction activities may contain

chemicals that are known to cause cancer, birth defects,

or other genetic abnormalities. These chemicals include:

• Lead from lead-based paints

• Crystalline silica from bricks, cement, and other

masonry products

• Arsenic and chromium from chemically treated lumber

The level of risk from exposure to these chemicals varies,

according to how often this type of work is performed. In

order to reduce exposure to these chemicals, work in a

well-ventilated area, and use approved safety equipment,

such as a dust mask that is speciﬁcally designed to ﬁlter

out microscopic particles.

5240-050

60V 16-INCH CORDLESS CHAINSAW

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger.

The instructions and warnings they give are no substitutes for proper accident

prevention measures.

WARNING: Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbolssuch as “DANGER,” “WARNING,”

and “CAUTION” before using this tool. Failure to follow all instructions listed below

may result in electric shock, ﬁre, and/or serious personal injury.

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May

be used in conjunction with other symbols or pictographs.

WARNING: The operation of any power tools can result in foreign objects being

thrown into your eyes, which can result in severe eye damage. Before beginning

power tool operation, always wear safety goggles or safety glasses with side shields

and a full face shield when needed. We recommend a Wide Vision Safety Mask for

use over eyeglasses or standard safety glasses with side shields. Always use eye

protection which is marked to comply with ANSI Z87.1.

SAFETY INSTRUCTIONS

SYMBOL MEANING

Safety Alert Indicates a potential personal

injury hazard.

Read & Understand

Operator's Manual

To reduce the risk of injury, user

must read and understand the

operator’s manual before using

this product.

Wear Eye Protection

Always wear safety goggles or

safety glasses with side shields

and a full face shield when

operating this product.

Wear Ear Protection

Chainsaw noise may damage

your hearing. Always wear sound

barriers (ear plugs or ear muers)

to protect your hearing.

Wear Head Protection Wear an approved safety hard hat

to protect your head.

SYMBOL MEANING

Wear Protective Gloves

Protect your hands with gloves when

handling saw and saw chain. Heavy

duty, nonslip gloves improve your

grip and protect your hands.

Be aware of kickback Contact of the guide bar tip with

any object should be avoided.

Guide Bar Tip Kickback

Tip contact can cause the guide

bar to move suddenly upward

and backward, which can cause

serious injury.

Two Handed Hold Always use two hands when

operating the Chainsaw.

Be Aware of Water Do not expose or operate the tool

in rain.

Direct Current Type or a characteristic of current

VVolt Voltage

T5A

Protective 5A limited

Batteries contain Li-ion.

Waste batteries should be sorted

for eco-friendly. Do not dispose

of waste batteries as unsorted

municipal waste.

mm Millimeter Length or size

in. Inch Length or size

kg Kilogram Weight

lb Pound Weight

ml Milliliter Volume

ﬂ. oz Fluid Ounce Volume

oCCelsius Temperature Temperature

oFFahrenheit Temperature Temperature

60V 16-INCH CORDLESS CHAINSAW 5240-050

POWER TOOL SAFETY

WARNING: Read all safety warnings and instructions. Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence

of ﬂammable liquids, gases or dust. Power tools create sparks which may ignite

the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed

plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of a ground fault circuit interrupter

(GFCI) reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the inﬂuence

of drugs, alcohol or medication. A moment of inattention while operating power

tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the o-position before

connecting to power source and/or battery pack, picking up or carrying the

tool. Carrying power tools with your ﬁnger on the switch or energizing power tools

that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

Do not use the power tool if the switch does not turn it on and o. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

Remove the battery pack, if detachable, from the power tool and/or activate

any battery disabling device before clearing jammed material, making any

adjustments, changing accessories, cleaning, or storing power tools. Such

preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may aect the power tool’s

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations dierent from those intended could

result in a hazardous situation.

Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces may lead to unsafe handling and/or loss

of control of the tool.

BATTERY TOOL USE AND CARE

Recharge only with the charger speciﬁed by the manufacturer. A charger that

is suitable for one type of battery pack may create a risk of ﬁre when used with

another battery pack.

Use power tools only with speciﬁcally designated battery packs. Use of any other

battery packs may create a risk of injury and ﬁre.

5240-050

60V 16-INCH CORDLESS CHAINSAW

When battery pack is not in use, keep it away from other metal objects, like

paper clips, coins, keys, nails, screws or other small metal objects, that can make

a connection from one terminal to another. Shorting the battery terminals together

may cause burns or a ﬁre.

Under abusive conditions, liquid may be ejected from the battery; avoid contact.

If contact accidentally occurs, ﬂush with water. If liquid contact eyes, additionally

seek medical help. Liquid ejected from the battery may cause irritation or burns.

Do not use a battery pack or tool that is damaged or modiﬁed. Damaged or

modiﬁed batteries may exhibit unpredictable behavior resulting in ﬁre, explosion

or risk of injury.

Do not expose a battery pack or tool to ﬁre or excessive temperature. Exposure

to ﬁre or temperature above 265 °F (130°C) may cause explosion.

Follow all charging instructions and do not charge the battery pack or tool out-

side the temperature range speciﬁed in the instructions. Charging improperly or at

temperatures outside the speciﬁed range may damage the battery and increase the

risk of ﬁre.

SERVICE

Have your power tool serviced by a qualiﬁed repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

Never service damaged battery packs. Service of battery packs should only be

performed by the manufacturer or authorized service providers.

SPECIFIC SAFETY INSTRUCTIONS FOR CHAINSAW

Keep all parts of the body away from the saw chain when the chainsaw is

operating. Before you start the chainsaw, make sure that the saw chain is not

contacting anything. A moment of inattention while operating chainsaws may

cause entanglement of your clothing or body with the chain.

Always hold the chainsaw with your right hand on the rear handle and your left

hand on the front handle. Holding the chainsaw with a reversed hand conﬁguration

increases the risk of personal injury and should never be done.

Hold the chainsaw by insulated gripping surfaces only, because the saw chain may

contact hidden wiring. Saw chains contacting a “live” wire may make exposed metal

parts of the chainsaw “live” and could give the operator an electric shock.

Wear eye protection. Further protective equipment for hearing, head, hands, legs

and feet is recommended. Adequate protective equipment will reduce personal

injury from ﬂying debris or accidental contact with the sawchain.

Do not operate a chainsaw in a tree, on a ladder, from a rooftop, or any unstable

support. Operation of a chainsaw in this manner could result in serious personal

injury.

Always keep proper footing and operate the chainsaw only when standing on ﬁxed,

secure and level surface. Slippery or unstable surfaces may cause a loss of balance

or control of the chainsaw.

Inhaltsverzeichnis

Andere Benchmark Kettensäge Handbücher

Benchmark

Benchmark 5241-100 Bedienungsanleitung

Beliebte Kettensäge Handbücher anderer Marken

Bushranger

Bushranger CS4210 Bedienungsanleitung

Husqvarna

Husqvarna 136, 141 Bedienungsanleitung

Echo

Echo CS-330EVL Bedienungsanleitung

HART

HART HLCS01 Bedienungsanleitung

Homelite

Homelite UH10817 Bedienungsanleitung

Westfalia

Westfalia SCS 725 Bedienungsanleitung

Nakayama

Nakayama EC2050 Bedienungsanleitung

The Handy

The Handy THPCS16 Bedienungsanleitung

McCulloch

McCulloch PRO MAC 54 Handbuch

Husqvarna

Husqvarna 359 E-tech Bedienungsanleitung

Craftsman

Craftsman 358.352162 Bedienungsanleitung

Craftsman

Craftsman 358.350270 Bedienungsanleitung

Craftsman

Craftsman 358.351610 Bedienungsanleitung

Echo

Echo CS-8001(6digits)(36) Bedienungsanleitung

Poulan Pro

Poulan Pro 545047544 Bedienungsanleitung

Ryobi

Ryobi RY3714VNM Bedienungsanleitung

Homelite

Homelite Ranger UT10926 Bedienungsanleitung

McCulloch

McCulloch TimberBear TM502 Bedienungsanleitung