Benchmark 1345-300 Bedienungsanleitung

Call us on our toll-free customer support line:

1-866-349-8665 (Monday through Friday 9am –5pm

Eastern Standard Time)

Technical questions

Replacement parts

Parts missing from package

PORTABLE BAND SAW

•

PORTABLE BAND SAW



Do not operate this tool with a worn or dull blade.



If any part is missing, bent or broken in any way, or if any electrical parts do not work properly, unplug the Bandsaw. Replace

damaged or missing parts before using the Bandsaw again. NEVER use a tool that is defective or operating abnormally.

Make sure the blade teeth point downward.

Ensure the blade guides are properly adjusted.

Turn the tool OFF if the tool is to be backed out of an uncompleted cut.

Before starting your cut, watch the saw while it runs. If it makes an unfamiliar noise or vibrates excessively, stop immediately.

Turn the Bandsaw off and unplug. Do not restart until you have found and corrected the problem.

Let the blade reach full speed before cutting.

Cut only one workpiece at a time.

Wear suitable work gloves to reduce the vibration effects during use.

PORTABLE BAND SAW



N/cm²

.../min

Min

Off position

~ or AC

This symbol designates that this tool is listed with Canadian and U.S.

requirements by ETL Testing Laboratories, Inc.

Conforms to UL STD. 60745-1 and 60745-2-20

Certified to CSA STD C222 No 60745-1 and 60745-2-20

PORTABLE BAND SAW

ELECTRICAL INFORMATION

The bandsaw is ready to run for 120V operation. This Bandsaw Is double insulated which means there are two

systems of insulation, instead of grounding. This means that no grounding is provided on a double-insulated

appliance, nor should a means for grounding be added. Servicing a double-insulated bandsaw requires extreme

care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for

a double-insulated bandsaw must be identical to the parts they replace. The double-insulated bandsaw is marked

with the words "DOUBLE INSULATED" and the symbol may also be marked on the tool.

Inhaltsverzeichnis

Andere Benchmark Gesehen Handbücher

Benchmark

Benchmark 1265-002 Bedienungsanleitung

Benchmark

Benchmark 1265-000 Bedienungsanleitung

Benchmark

Benchmark 1265-001 Bedienungsanleitung

Benchmark

Benchmark 1347-006 Bedienungsanleitung

Benchmark

Benchmark 1270-205 Bedienungsanleitung

Benchmark

Benchmark 1347-001 Bedienungsanleitung

Benchmark

Benchmark 1347-005 Bedienungsanleitung

Benchmark

Benchmark 1270-001 Bedienungsanleitung

Benchmark

Benchmark 1347-100 Bedienungsanleitung

Benchmark

Benchmark 1270-204 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung