Beninca DA.AX Bedienungsanleitung

DA.AX

CENTRALINA A MICROPROCESSORE

CONTROL UNIT WITH MICROCONTROLLER

MIKROCONTROLLER-STEUERUNG

CENTRALE A MICROCONTRÔLEUR

CENTRALITA A MICROPROCESADOR

AUTOMATISMI PER CANCELLI

L8542605

Rev. 07/00/01

Libro istruzioni

Operating instructions

Betriebsanleitung

Livret d’instructions

Libro de instrucciones

UNIONE NAZIONALE COSTRUTTORI

AUTOMATISMI PER CANCELLI, PORTE,

SERRANDE ED AFFINI

UNI

EN ISO

9001

Dichiarazione CE di conformità Déclaration CE de conformité

EC declaration of confirmity Declaracion CE de conformidad

EG-Konformitatserklarung

Con la presente dichiariamo che il nostro prodotto

We hereby declare that our product

Hiermit erklaren wir, dass unser Produkt

Nous déclarons par la présente que notre produit

Por la presente declaramos que nuestro producto

DA.AX

è conforme alle seguenti disposizioni pertinenti:

complies with the following relevant provisions:

folgenden einschlagigen Bestimmungen entspricht:

correspond aux dispositions pertinentes suivantes:

satisface las disposiciones pertinentes siguientes:

Direttiva sulla compatibilità elettromagnetica (89/336/

CCE, 93/68/CEE)

EMC guidelines (89/336/EEC, 93/68/EEC)

EMV-Richtlinie (89/336/EWG, 93/68/EWG)

Directive EMV (89/336/CCE, 93/68/CEE) (Compatibilité

électromagnétique)

Reglamento de compatibilidad electromagnética (89/336/

MCE, 93/68/MCE)

Norme armonizzate applicate in particolare:

Applied harmonized standards, in particular:

Angewendete harmonisierte Normen, insbesondere:

Normes harmonisée utilisées, notamment:

Normas armonizadas utilzadas particularmente:

EN 55022, EN 61000-3-2, EN 61000-3-3, EN 50082-1

Norme e specifiche tecniche nazionali applicate in

particolare:

Applied national technical standards and specifications, in

particular:

Angewendete nationale Normen und technische

Spezifikationen, insbesondere:

Normes et specifications techniques nationales qui ont été

utilisées, notamment:

Normas y especificaciones técnicas nacionales que se

utilizaron particularmente:

UNI 8612

Data/Firma

Direttiva sulla bassa tensione (73/23/CEE, 93/68/CEE)

Low voltage guidelines (73/23/EEC, 93/68/EEC)

Tiefe Spannung Richtlinie (73/23/EWG, 93/68/EWG)

Directive bas voltage (73/23/CEE, 93/68/CEE)

Reglamento de bajo Voltaje (73/23/MCE, 93/68/MCE)

Norme armonizzate applicate in particolare:

Applied harmonized standards, in particular:

Angewendete harmonisierte Normen, insbesondere:

Normes harmonisée utilisées, notamment:

Normas armonizadas utilzadas particularmente:

EN 60204-1, EN 60335-1

Data/Firma

AUTOMATISMI PER CANCELLI

Automatismi Benincà Srl

Via Scamozzi, 3

36030 MONTECCHIO P. VI

ITALIA

TRF1

FF1

VDR2

R18 D1 TCA

FF4

INPUT

230VAC MANT.

OUT

24VAC

FTC

FCA

FCC

P.P.

CHIUDE

F N

COM. APRE CHIUDE

2 3 4 5 6 7 8 9 10 11 12 13 14 15

FF3

DA.AX

SW1

C15

v1.0

R21

R19

R20

U6 U4

R28

6.3A

VDR1 VDR3

RL1

COMUNE

RL2

APRE

RL3

CHIUDE

VDR4

POWER

1 Funz. P.P.

2 Rich. Aut.

3 Funz. Cond.

4 P.P./Apre

C6 C10

R8 R6

+TL

250mA

R23

C13

R15

R11

R16

R12

R17

R13

R14

R10

C12

C11

C14

R22

FUSE

DA.AX Control unit with microcontroller

The microprocessor control unit “DA.AX” can be used with motors having a power not exceeding 500W.

Installation instructions.

a) The electrical installation and functioning logic must comply with current standards.

b) It is advisable to keep the power cables (motor, power supply) detached from the control cables

(push-buttons, photocells, radio). In order to avoid any possible interference it is recommended

to provide for and use two separate sheaths (see EN 60204-1 15.1.3).

c) Before powering the unit, check again all connections which have been carried out.

d) Check the correct presettings of the Dip-Switches.

e) When the unit is powered, the LED “POWER” must be lit; in the negative, check fuses and that

230Vac 50Hz power supply is present between terminals 1 and 2 (INPUT 230VAC - keep to

phase / neutral).

f) The N.C. inputs not used must be connected to the common “+V”.

g) Should the direction of rotation of the motor be reversed, invert the motor wires “OPEN” with

“CLOSE” and the limit switches wires “FCA” with “FCC”.

Input/Output functions

(1,2) INPUT 230VAC= Control unit 230Vac 50 Hz power supply

(respect phase/neutral wire position).

(3,4,5) COM/APRE/CHIUDE= Connection to the corresponding 230Vac 50 Hz motor terminals

(the earth wire (green/yellow) must be connected to the motor housing).

(6,7) OUT 24VAC= 24Vac auxiliary power supply output (100mA max.).

(12) +V= Common connection to all the control inputs.

(9) FTC= Photocell receiver input (n.c. contact).

(10) FCA= Input of limit switch APRE (n.c. contact).

(11) FCC= Input of limit switch CHIUDE (n.c. contact).

(8) P.P.= Input, “PASSO-PASSO” push button or “APRE” push-button according to the Dip-Switch

presetting

(15) CHIUDE= CLOSE button input (n.o. contact).

(13,14) ANT.= Input of radio board antenna

Dip-switch functions

N.B.: Every change of functions have to be done without electricity.

DSW1= This selects the type of functioning of the P.P. button and Remote control.

Off= ”APRE” - ”STOP” - ”CHIUDE” functioning

On= ”APRE” - ”CHIUDE” - ”APRE” functioning.

DSW2= This enables or disables the automatic re-closing - ”TCA TRIMMER”.

Off= Automatic re-closing enabled

On= Automatic re-closing disabled

DSW3= This enables or disables the apartment building function (after the first opening command, the

P.P. button and the Remote control are deactivated).

Off= Apartment building function disabled.

On= Apartment building function enabled.

DSW4= It selects the operation of the “P.P.” input as push-button “PASSO-PASSO” or push-button

“APRE”.

Off= “P.P.” push-button

On= “APRE” push-button

Trimmer functions

TCA= This allows the automatic re-closing time to be adjusted when this is enabled by positioning the

DSW2 Dip-switch on OFF.

Adjustment can be from a minimum of 5 to a maximum of 150 seconds.

The minimum time is obtained by rotating the trimmer completely clockwise.

TL= This allows the working time of the automation to be adjusted. If the limit switches fail, the soft-

ware protection will intervene after this time has elapsed. (Add about 4 sec. to the actual stroke

time of the automation).

Adjustment can be from a minimum of 7 to a maximum of 180 seconds.

The minimum time is obtained by rotating the trimmer completely clockwise.

Note

• The ”STOP” control can be carried out by connecting the normally closed push button between the

common wire of the limit switch and the ”+V” terminal (see drawing).

• If the ”P.P.” input is used as ”APRE” (Dip-switch 4= ON), the automatic closure is not carried out until

the contact remains closed.

FTC

FCA

FCC

STOP button

Limit switch buttons

AUTOMATISMI PER CANCELLI

AUTOMATISMI BENINCÀ Srl - Via Capitello, 45 - 36066 Sandrigo (VI) - Tel. 0444 751030 r.a. - Fax 0444 759728

Andere Beninca Steuereinheit Handbücher

Beninca

Beninca CP.K3-RE Bedienungsanleitung

Beninca

Beninca CP.J3 Bedienungsanleitung

Beninca

Beninca KER Bedienungsanleitung

Beninca

Beninca CP.J4 ESA Bedienungsanleitung

Beninca

Beninca DA.96AE Bedienungsanleitung

Beninca

Beninca Brain 24 MBE Bedienungsanleitung

Beninca

Beninca CP.BULL Bedienungsanleitung

Beninca

Beninca SA.03 Head Bedienungsanleitung

Beninca

Beninca HEADY 24 Bedienungsanleitung

Beninca

Beninca DA.93AM Bedienungsanleitung

Beninca

Beninca LOGICA Bedienungsanleitung

Beninca

Beninca BULL 624 TURBO Bedienungsanleitung

Beninca

Beninca Start Bedienungsanleitung

Beninca

Beninca DREAMY Bedienungsanleitung

Beninca

Beninca CP.MBE24 Bedienungsanleitung

Beninca

Beninca DA.V Bedienungsanleitung

Beninca

Beninca CELL.P Bedienungsanleitung

Beninca

Beninca CP.J3M Bedienungsanleitung

Beninca

Beninca RI.624 Bedienungsanleitung

Beninca

Beninca DA.24A Bedienungsanleitung

Beninca

Beninca CORE Bedienungsanleitung

Beninca

Beninca THINK-I Bedienungsanleitung

Beninca

Beninca SA02M Bedienungsanleitung

Beninca

Beninca MBE Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung