BenQ W1050 Bedienungsanleitung
Digital Projector
U
ser
Ma
n
ua
l
W1050/W1050S/HT1070A
V1.20
Table of contents 2
Important safety
instructions ................... 3
Introduction.................. 7
Projector features .................................... 7
Shipping contents...................................... 8
Projector exterior view ........................10
Positioning your
projector ..................... 16
Choosing a location ............................... 16
Obtaining a preferred projected image
size ............................................................. 17
Connection ................. 18
Connecting a computer ........................19
Connecting Video source devices ......20
Operation.................... 22
Starting up the projector ......................22
Adjusting the projected image............. 23
Using the menus .....................................25
Securing the projector ..........................28
Switching input signal.............................30
Selecting the aspect ratio...................... 31
Optimizing the image.............................33
Advanced picture quality controls......36
Hiding the image .....................................39
Operating in a high altitude
environment.............................................39
Adjusting the sound ...............................40
Locking control keys.............................. 40
Personalizing the projector menu
display........................................................41
Select the lamp saver mode .................41
Shutting down the projector ...............42
Menu operation....................................... 43
Maintenance ............... 58
Care of the projector ............................58
Lamp information....................................59
Troubleshooting......... 66
Specifications.............. 67
Dimensions ...............................................68
Ceiling mount installation......................68
Timing chart .............................................69
Warranty and Copyright
information................. 73
Ta b l e o f c o n t e n t s
Important safety instructions 3
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of
information technology equipment. However, to ensure safe use of this product, it is
important that you follow the instructions mentioned in this manual and marked on
the product.
Safety Instructions
1. Please read this manual before
you operate your projector.
Save it for future reference.
2. Do not look straight at the
projector lens during
operation. The intense light beam
may damage your eyes.
3. Refer servicing to qualified
service personnel.
4. Always open the lens shutter
or remove the lens cap when
the projector lamp is on.
5. In some countries, the line voltage
is NOT stable. This projector is
designed to operate safely within a
mains voltage between 100 to 240
volts AC, but could fail if power
cuts or surges of ±10 volts occur.
In areas where the mains
voltage may fluctuate or cut
out, it is recommended that
you connect your projector
through a power stabilizer,
surge protector or
uninterruptible power supply
(UPS).
6. Do not block the projection lens
with any objects when the
projector is under operation as this
could cause the objects to become
heated and deformed or even cause
a fire.
Important safety instructions4
Safety Instructions (Continued)
7. The lamp becomes extremely hot
during operation. Allow the
projector to cool for
approximately 45 minutes prior
to removing the lamp assembly
for replacement.
8. Do not operate lamps beyond the
rated lamp life. Excessive
operation of lamps beyond the
rated life could cause them to
break on rare occasions.
9. Never replace the lamp assembly
or any electronic components
unless the projector is unplugged.
10. Do not place this product on an
unstable cart, stand, or table. The
product may fall, sustaining
serious damage.
11. Do not attempt to disassemble
this projector. There are
dangerous high voltages inside
which may cause death if you
should come into contact with
live parts.
Under no circumstances should you
ever undo or remove any other
covers. Refer servicing only to
suitably qualified professional
service personnel.
12. When the projector is under
operation, you may sense some
heated air and odor from its
ventilation grill. It is a normal
phenomenon and not a product
defect.
Important safety instructions 5
Safety Instructions (Continued)
13. Do not place this projector in any of
the following environments.
- Space that is poorly ventilated or
confined. Allow at least 50 cm
clearance from walls and free flow of
air around the projector.
- Locations where temperatures may
become excessively high, such as the
inside of a car with all windows
rolled up.
- Locations where excessive humidity,
dust, or cigarette smoke may
contaminate optical components,
shortening the projector's life span
and darkening the image.
- Locations near fire alarms
- Locations with an ambient
temperature above 40°C / 104°F
- Locations where the altitudes are
higher than 3000 m (10000 feet).
14. Do not block the ventilation holes.
- Do not place this projector on a
blanket, bedding or any other soft
surface.
- Do not cover this projector with a
cloth or any other item.
- Do not place inflammables near the
projector.
If the ventilation holes are seriously
obstructed, overheating inside the
projector may result in a fire.
15. Always place the projector on a
level, horizontal surface during
operation.
- Do not use if tilted at an angle of
more than 10 degrees left to right,
nor at angle of more than 15
degrees front to back. Using the
projector when it is not fully
horizontal may cause a malfunction
of, or damage to, the lamp.
3000 m
(10000
feet)
0 m
(0 feet)
Important safety instructions6
Safety Instructions (Continued)
16. Do not stand the projector on end
vertically. Doing so may cause the
projector to fall over, causing injury
or resulting in damage to the
projector.
17. Do not step on the projector or
place any objects upon it. Besides
probable physical damage to the
projector, doing so may result in
accidents and possible injury.
18. Do not place liquids near or on the
projector. Liquids spilled into the
projector may cause it to fail. If the
projector does become wet,
disconnect it from the power
supply's wall socket and call BenQ
to have the projector serviced.
19. This product is capable of displaying
inverted images for ceiling mount
installation.
Use only BenQ's Ceiling
Mount Kit for mounting the
projector and ensure it is
securely installed.
Introduction 7
Introduction
Projector features
This model is one of the best projectors available in the world. You can enjoy the best
performance video quality with up to 300-inch projection across various devices such
as PC, laptop, DVD and VCR even document camera to bring all possibility to life.
The projector offers the following features
• Basic and Advanced menu types for your selection.
• Wall color correction allowing projection on surfaces of several
predefined colors
• Auto source speeding up the signal detecting process
• Color management allowing color adjusents to your liking
• Selectable quick cooling function makes the projector cool in a shorter
time
• One-key auto-adjustment to display the best picture quality
• Less than 0.5 W power consumption in standby mode
• The apparent brightness of the projected image will vary depending on
the ambient lighting conditions, selected input signal contrast/
brightness settings, and is proportional to projection distance.
• The lamp brightness will decline over time and may vary within the
lamp manufacturers specifications. This is normal and expected
behavior.
Introduction8
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these
items are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ
from those illustrated.
*The warranty card is only supplied in some specific regions. Please consult
your dealer for detailed information.
Projector Power cord VGA cable
Quick start guide Warranty card* Remote control with
battery
User manual CD
Digital Projector
QQ
uick Start Guide
uick Start Guide
Introduction 9
Optional accessories
1. Spare lamp kit
2. Ceiling mount kit
3. Carry bag
4. 3D glasses
Introduction10
Projector exterior view
1. External control panel
(See "Projector" on page 11 for
details.)
2. Lamp cover
3. Vent (air inhale)
4. Focus ring
5. Zoom ring
6. Front IR remote sensor
7. Projection lens
8. Quick-release lever
9. USB mini-B input jack
10. RS-232 control port
11. RGB (PC) signal input jack
12. HDMI input jack
13. Audio input jack
14. Audio output jack
15. Kensington anti-theft lock slot
16. Security bar
17. Vent (heated air exhaust)
18. Rear adjuster foot
19. Front adjuster foot
20. Ceiling mount holes
21. Video input jack
22. AC power cord inlet
1
2
7
6
8
4
5
3
Front/upper side
910 11 12 13 141516
17
1819
18 2021
22
Rear/lower side
Andere Handbücher für W1050
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere BenQ Digitalprojektor Handbücher
Beliebte Digitalprojektor Handbücher anderer Marken
Digital Projection
Digital Projection TITAN XG-500 Bedienungsanleitung
Barco
Barco RETRO GRAPHICS 2100 Bedienungsanleitung
Barco
Barco R9002400 Bedienungsanleitung
Epson
Epson EX7230 Pro Bedienungsanleitung
Digital Projection
Digital Projection E-VISION 4500 series Bedienungsanleitung
Hitachi
Hitachi ED-X45N Bedienungsanleitung
