BenQ PointWrite PT20 Bedienungsanleitung
PointWrite User Manual
PT20 V1.00
2
Table of contents
Shipping Contents........ 3
Product Overview........ 4
About Touch Module .............................4
Dimensions ................................................5
Preparation for Setup.. 6
Environment Condition...........................6
Surface Condition.....................................7
Projector Requirements........................10
Touch Module Installation....................11
Driver Installation...................................13
Connection...............................................14
Configuration
Setting ........................16
Alignment
Instructions.................17
Alignment View.......................................17
Adjustment for Touch Module
Laser Curtain...........................................18
PointWrite
Calibration..................21
Specifications..............22
Shipping Contents 3
Shipping Contents
The PointWrite touch module is a touch transmitter for the BenQ
PointWrite interactive projector. To use the touch module, please find the
standard accessories below and follow this manual.
1. PointWrite Touch Module
2. Quick Start Guide: Shortcut of how to use the PointWrite touch
solution.
3. Dummy pen with pen nibs: 2 extra pen nibs for dummy pen.
4. Mini USB Cable: Connect to supply power to the touch module.
5. Alignment masks: For laser curtain alignment.
6. Wrist strip x 2
7. Tape x 2
123
PointWrite Touch
Module Quick manual Dummy pen with pen
nibs x 2
456
Mini USB cable Alignment masks Wrist strip x 2
7
Tape x 2
PointWrite User Manual
----
V1.00
Shipping Contents4
About Dummy Pen
When replacing the pen nib on the dummy pen, take it from the dummy pen.
Product Overview
About Touch Module
Green LED: normal; orange LED: abnormal.
Right View
For better touch performance, keep the pen nib clean.
When replacing the pen nib, take it
from the dummy pen.
Front View Rear View
Cover
Top screw
Left screw Right screw
Attach tape area
Touch module head
Mounting hole Mounting hole
LED indicator
USB port
Shipping Contents 5
Dimensions
198.9 mm
69.6 mm
42.1 mm
Preparation for Setup6
Preparation for Setup
Environment Condition
The touch module functions with an PointWrite interactive projector for
scalable finger touch functionality, transforming any flat surface into a virtual
interactive whiteboard.
For optimal finger touch quality, follow these guidelines:
1. Close all window curtains.
2. Select a projection area away from direct sunlight to prevent writing
interference.
3. Keep infrared devices, such as: infrared microphones, away from the
front side of the screen to prevent interference.
4. Remove accessories, such as: watches or necklaces, with a reflective
surface to prevent interference.
Touch area
Touch area Touch area
Preparation for Setup 7
Surface Condition
Optimal finger touch quality is dependent on the selected surface condition.
You can attach the touch module on a wall surface or existing board. It is
important to choose a smooth and flat surface area free of protrusions.
In the event of a projection surface not conducive to finger touch
functionality, select the PointWrite pen as the pointing method for the
classroom.
Selecting a Wall Surface
• Select a wall that is straight and flat, without any protruding objects on it.
• Writing directly on the wall with the pen can damage the wall. Test the
wall surface by writing on it with the dummy pen before you install the
touch module.
Using on the Wall Surface
Consider the following factors when selecting a wall surface to project your
image onto:
• Project on a smooth, semi-gloss painted surface to reduce glare from the
projector, to achieve optimal touch quality and to reduce wear on the pen
nib.
Using on a Dry-erase Board
• Attach a dry-erase board to the wall if you’re projecting on a textured
surface. A dry-erase board is a flat surface that works well with your
interactive projector and allows you to write smoothly in digital ink.
Preparation for Setup8
Measuring the Flatness of the Surface
1. Place a six-foot carpenter’s level horizontally across the projection area
(board).
2. Locate the point on the level furthest away from the projection area.
3. Measure the surface flatness on both sides of the projection area.
• Overall finger touch performance is influenced by the flatness of the
projection surface.
• A flatness variance of 2mm in any direction ensures optimal finger touch
performance.
< 2 mm <2 mm
< 2 mm < 2 mm
Preparation for Setup 9
Surface Obstructions
Maintain the projection area clean and free of obstructions. The following are
common obstruction examples:
• Cables or wires that hang into the projected image.
Leave extra space between the cables and the projected image so you can
make image adjustments later.
Preparation for Setup10
Projector Requirements
The PointWrite touch module is only available for BenQ PointWrite series
interactive projector. Make sure the PointWrite camera module is installed
properly before you setup the PointWrite touch module.
• For more information, please refer to the PointWrite camera module
User Manual or Quick Guide when installing.
• To ensure the projector provides power to the PointWrite Touch
module, turn on the USB Power Switch function in the OSD menu.
• PointWrite touch module is compatible with selected PointWrite camera
module and projector.
Andere Handbücher für PointWrite PT20
1
Inhaltsverzeichnis
Andere BenQ Projektorzubehör Handbücher
BenQ
BenQ 0.4 Wall Mount-WM04G3 Bedienungsanleitung
BenQ
BenQ PointWrite Bedienungsanleitung
BenQ
BenQ InstaShow WDC10R Bedienungsanleitung
BenQ
BenQ PointWrite Bedienungsanleitung
BenQ
BenQ 0.3 Wall Mount-WM03G2 Bedienungsanleitung
BenQ
BenQ PointWrite PW31U Bedienungsanleitung
BenQ
BenQ InstaShow VS20 Bedienungsanleitung
BenQ
BenQ InstaShow VS10 Bedienungsanleitung
BenQ
BenQ InstaShare Bedienungsanleitung
BenQ
BenQ ScreenBar Bedienungsanleitung
BenQ
BenQ Ceiling Mount-CM00G2 Bedienungsanleitung
BenQ
BenQ WDC20C Bedienungsanleitung
BenQ
BenQ InstaShow X Bedienungsanleitung
BenQ
BenQ InstaShow S Bedienungsanleitung
BenQ
BenQ PT01 Bedienungsanleitung
BenQ
BenQ LX710 Bedienungsanleitung
BenQ
BenQ LH856UST Bedienungsanleitung
BenQ
BenQ WDC10 InstaShow Kurzanleitung
BenQ
BenQ 0.4 Wall Mount-WM04G3 Bedienungsanleitung
BenQ
BenQ PointWrite PW30U Bedienungsanleitung
