BenQ PX9600 Bedienungsanleitung
PX9600 / PW9500
Digital Projector
BenQ User Manual
Table of contents
Important safety instructions 4
Overview 7
Shipping contents 7
Projector exterior view 8
Front and upper side view 8
Rear View 8
Left side view 8
Upper Right side View 9
Under View 9
Control panel and functions 10
Remote control and functions 11
Remote control operation 12
Setup and Operation 13
Setting the remote control batteries 13
Connecting to the projector 13
Projection lens selection and Installation 14
Installing or Removing the Optional Lens 14
Installing the New Lens 14
Installing the New Lens Using the Anti-theft Screw 14
Removing the Existing Lens From the Projector 15
Choosing a location 16
Throw distance and screen size 17
Lens Shift Adjustable Range 19
Making Connections 20
Preparations 20
Connecting DVI-D devices 21
Connecting component-video devices 22
Connecting a computer 23
Connecting a monitor 24
Using the projector 25
Preparations 25
Turning the projector on or off 26
Selecting an input source 27
To select the video source: 27
Using the menus 28
Adjusting the projected Image 29
Adjusting the image position 29
Fine-tuning the image size and clarity 30
Adjusting the projection angle 30
Correcting picture distortion 31
Auto-adjusting the image 31
Turning off the Projector 32
Using On-Screen Display 33
Using the Menus 33
Navigating the OSD 33
On-Screen Display (OSD) menus 34
Menu Map 34
Picture 36
Signal 40
Video 41
Setup 42
Installation 48
Preventing the Unauthorized Use of the Projector 56
Unlocking the Projector 57
Using the Physical Lock 57
Additional information 58
Care of the projector 58
Cleaning the lens 58
Cleaning the projector case 58
Storing the projector 58
Transporting the projector 58
Installing the Optional Color Wheel 62
Cleaning the Filters 64
Troubleshooting 66
Indicator Messages 66
Common Problems and Solutions 67
Tips for Troubleshooting 67
Image Problems 68
Specications 70
Dimensions 71
Timing chart 72
3D Supported Timing 73
RS232 Command Control 74
4
English
Thank you for your purchase of this quality BenQ projector. For the best results, please read this
manual through carefully as it is your guide through the control menus and operation.
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product, it is important that you follow
the instructions mentioned in this manual and marked on the product.
1. Please read this user manual before you
operate your projector. Keep this manual in
a safe place for future reference.
2. Always place the projector on a level,
horizontal surface during operation.
- Do not place the projector on an
unstable cart, stand, or table as it may fall
and be damaged.
- Do not place inammables near the
projector.
- Do not use if tilted at an angle of more
than 10 degrees left to right, nor at angle
of more than 15 degrees front to back.
4. Do not place the projector in any of the
following environments:
- space that is poorly ventilated or conned.
Allow at least 50 cm clearance from walls
and free ow of air around the projector.
- locations where temperatures may become
excessively high, such as the inside of a car
with all windows closed.
- locations where excessive humidity, dust,
or cigarette smoke may contaminate optical
components, shorten the projector’s
lifespan and darken the screen.
- locations near re alarms.
- locations with an ambient temperature
above 35°C/95°F.
- locations where altitude is higher than 1500
meters/4920 feet above sea level.
3. Do not store the projector on end
vertically. Doing so may cause the projector
to fall over, causing injury or resulting in
damage.
Read
Manual
4920-
9840
feet
5
English
3. Do not block the vents holes while the
projector is on (even in standby mode):
- Do not cover the projector with any item.
- Do not place the projector on a blanket,
bedding or any other soft surface.
6. In areas where the mains power supply
voltage may uctuate by ±10 volts, it
is recommended that you connect your
projector through a power stabilizer, surge
protector or uninterruptible power supply
(UPS) as appropriate to your situation.
7. Do not step on the projector or place any
objects upon it.
8. Do not place liquids near or on the
projector.
Liquids spilled into the projector will void
your warranty. If the projector does
become wet, disconnect it from the power
point and call BenQ to have the projector
repaired.
UPS
9. Do not look straight into the projector
lens during operation. It may harm your
sight.
10. Do not operate the projector lamp
beyond the rated lamp life. Excessive
operation of lamps beyond the rated
life could cause a lamp to break on rare
occasions.
11.The lamp becomes extremely hot during
operation.Allow the projector to cool
for approximately 45 minutes prior to
removing the lamp assembly for
replacement.
12. This projector is capable of displaying
inverted images for ceiling mount
installation. Use only BenQ's Ceiling
Mount Kit for mounting.
!!
!!
6
English
13. Never attempt to replace the lamp
assembly until the projector has cooled
down and is unplugged from the power
supply.
14. When you think service or repair is
required, take the projector only to a
suitably qualied technician.
15. Do not attempt to disassemble this
projector.
There are dangerous high voltages inside
which may cause death if you should
come into contact with live parts.The
only user serviceable part is the lamp
which has its own removable cover.
Under no circumstances should you ever
undo or remove any other covers. Refer
servicing only to suitably qualied
professional service personnel.
Please keep the original packing for possible future shipment.
7
English
Overview
Shipping contents
Carefully unpack and verify that you have the items below. Some of the items may not be
available depending on your region of purchase. Please check with your place of purchase.
Some of the accessories may vary from region to region.
The warranty card is only supplied in some specic regions. Please consult your dealer for detailed information.
Projector
without lens
Remote
Without AA batteries Warranty card User manual CD
Quick start guide Power cable VGA cable C-Type Color wheel
Anti-Theft Screw Wired Remote cable Lens Hole Cap
8
English
Projector exterior view
Front and upper side view
Rear View
Left side view
1. Control Panel
2. Air Inlet
3. Front IR sensor
4. Lens Release button
5. Lens (Remove lens hole cap before use)
6. Foot for adjusting projector level
7. Kensington Lock
8. Air Exhaust
9. Air Inlet
10. Air Filter
11. Rear IR sensor
5 26
1
43
10
11
9 8 7
1224
19 25 22 262023 21
13 1418 1617 15
12. AC Power Cable Inlet
13. AC Power Switch
14. Screen Trigger output
15. RS-232 control input
16. S-Video input
17. Video input
18. Components Y/Pb(Cb)/Pr(Cr)
input
19. USB port for service
20. LAN-RJ45
21. Computer 1, D-Sub VGA input
22. Monitor Out, only for computer 1.
23. Computer 2, RGBHV(H+V),
Y/Pb(CB)/Pr(Cr) input
24. Air Filter
25. DVI-D Input
26. Wired Remote
9
English
Upper Right side View
Under View
29
28
27. Handle
28. Ceiling support holes
(Mounting Screw: M4*12mm)
29. Air Filter
27
10
English
Control panel and functions
Devices Function
FOCUS+ Focus the projected image
FOCUS-
ZOOM+ Increase/decrease projected image size
ZOOM-
UP BOTTON
Control Lens shift to Move image left, right,
up, or down
RIGHT BOTTON
DOWN BOTTON
LEFT BOTTON
MENU Open / Close the OSD
UP/ DOWN/ LEFT/
RIGHT BUTTONS Navigate and change settings in the OSD
ENTER Select or change settings in the OSD
CANCEL Exit the On-Screen Display (OSD)
POWER
Turn the projector on or off
(main power switch must be turned on rst).
Press to place the projector in standby mode
Source Select the input source
AUTO Auto Sync to optimize image size, position,
and resolution
Power (LED)
Green / Red / Orange / Flashing
See Indicator Messages
page 66 Troubleshooting
WARNING (LED)
Green / Red / Orange / Flashing
See Indicator Messages
page 66 Troubleshooting
LAMP 1 (LED) Green / Flashing, See Indicator Messages
page 66 Troubleshooting
LAMP 2 (LED)
Andere Handbücher für PX9600
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere BenQ Projektor Handbücher
BenQ
BenQ W1050 Bedienungsanleitung
BenQ
BenQ LK954ST Bedienungsanleitung
BenQ
BenQ MW523 Bedienungsanleitung
BenQ
BenQ MX613ST Bedienungsanleitung
BenQ
BenQ LH820ST Bedienungsanleitung
BenQ
BenQ S11 Bedienungsanleitung
BenQ
BenQ SP830 - WXGA DLP Projector Bedienungsanleitung
BenQ
BenQ LU960ST Bedienungsanleitung
BenQ
BenQ Home Entertainment PE5120 Bedienungsanleitung
BenQ
BenQ MP771 - XGA DLP Projector Bedienungsanleitung
BenQ
BenQ PB8140/PB8240/PB8250 Bedienungsanleitung
BenQ
BenQ LW61ST Bedienungsanleitung
BenQ
BenQ CinePrime Series Bedienungsanleitung
BenQ
BenQ Portable Series Bedienungsanleitung
BenQ
BenQ MX816ST Bedienungsanleitung
BenQ
BenQ CM00G3 Bedienungsanleitung
BenQ
BenQ SH910 Bedienungsanleitung
BenQ
BenQ MW851UST Bedienungsanleitung
BenQ
BenQ x3100i Bedienungsanleitung
BenQ
BenQ i500 Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
Christie
Christie LHD700 Bedienungsanleitung
