4Universal Cellular Communicator
Hereby Bentel Security declares that
220 Series
is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The complete Declaration of Conformity for each Device can be found at www.bentelsecurity.com.
The BGS-220, BGS-220K, B3G-220/EU and B3G-220K/EU product models have been certified by IMQ/A to be compliant with standards:
EN 50136-1:2012 and EN 50136 2:2013 for Alarm transmission system performance SP2 (D2, M2, T2, S0, I0) for vocal/SMS alarm messages and SP4 (D3,
M3, T4, S2, I3) for digital messages;
EN 50131-10, Security Grading 2;
T031.
To ensure conformity with the T031 standard, the Communicator must be connected to the panel with terminals LI and the following events and messages/
codes must be set: INTRUSION ALARM, TAMPER ALARM, MAIN POWER FAILURE, BATTERY FAILURE, HOLD-UP, ARMING, DISARMING,
INHIBITED ZONE AND ISOLATED ZONE.
The communicator is certified IMQ-SECURITY SYSTEMS if powered by the panel and without backup battery.
Installation of these systems must be carried out strictly in accordance with the instructions described in this manual and in compliance with the local laws
and bylaws in force. The above mentioned 220 series is been designed and made to the highest standards of quality and performance. The manufacturer
recommends that the installed system should be completely tested at least once a month. Bentel Security shall not be responsible for damage arising from
improper installation or maintenance by unauthorized personnel. Bentel Security reserves the right to change the technical specifications of this product
without prior notice.
RECYCLING INFORMATION
Bentel Security recommends that customers dispose of their used equipments (panels, detectors, sirens, and other devices) in an environmentally sound
manner. Potential methods include reuse of parts or whole products and recycling of products, components, and/or materials. For specific information see
www.bentelsecurity.com/index.php?o=environmental.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE
To program the device, use software BOSS ver. 4.0 or later.
In the European Union, this label indicates that this product should NOT be disposed of with household waste. It should be deposited at an appropriate
facility to enable recovery and recycling. For specific information see www.bentelsecurity.com/index.php?o=environmental.
INTRODUCTION 5
General specifications. . . . . . . . . . . . . . . . . . .6
Technical specifications . . . . . . . . . . . . . . . . .7
Identification of parts. . . . . . . . . . . . . . . . . . . .8
Description of jumpers . . . . . . . . . . . . . . . . . .8
Description of indicator lights . . . . . . . . . . . .9
Description of terminals . . . . . . . . . . . . . . . .11
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connection example . . . . . . . . . . . . . . . . . . .18
GENERAL DESCRIPTION 19
Access levels . . . . . . . . . . . . . . . . . . . . . . . . .20
USB connector functions . . . . . . . . . . . . . . .21
Power Monitor . . . . . . . . . . . . . . . . . . . . . . . .22
Internal events . . . . . . . . . . . . . . . . . . . . . . . .23
Operating Principles . . . . . . . . . . . . . . . . . . .25
Priority handling. . . . . . . . . . . . . . . . . . . . . . .27
Pay as you go balance check . . . . . . . . . . . .28
Panel Transmission Monitoring (PTM). . . . .28
Activating outputs . . . . . . . . . . . . . . . . . . . . .29
SMS Programming. . . . . . . . . . . . . . . . . . . . .32
PC PROGRAMMING 35
Phonebook. . . . . . . . . . . . . . . . . . . . . . . . 39
Options . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Network Settings. . . . . . . . . . . . . . . . . . . 43
Inputs/Outputs . . . . . . . . . . . . . . . . . . . . 44
Communicator . . . . . . . . . . . . . . . . . . . . 46
IP Receivers. . . . . . . . . . . . . . . . . . . . . . . 49
Voice Messages . . . . . . . . . . . . . . . . . . . . 50
PSTN/PTM . . . . . . . . . . . . . . . . . . . . . . . 51
Event Log . . . . . . . . . . . . . . . . . . . . . . . . 52
Firmware Update . . . . . . . . . . . . . . . . . . 52
Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
APPENDIX 55
Conformity with EN 50136-2:2013. . . . . . . . .55
Operations with the USB key . . . . . . . . . . . .57
Pass-Through . . . . . . . . . . . . . . . . . . . . . . . . .61
FCC Compliance Statement . . . . . . . . . . . . .63
