3Bentone
General
Table of contents
1. General Information __________________________________ 4
2. Technical data _______________________________________ 8
2.1 Dimensions B 30__________________________________ 8
2.2 Dimensions flange_________________________________ 8
2.3 Working field B 30 ________________________________ 9
2.4 Setting of brake plate and air flow __________________ 10
2.5 Recommended nozzle and pressure ________________ 10
2.6 Burner installation ________________________________ 10
2.7 Nozzle table_____________________________________ 12
2.8 Description _____________________________________ 14
3. General instructions _________________________________ 16
3.1 General rules ____________________________________ 16
4. Installation _________________________________________ 17
4.1 Handling and lifting instruktion _____________________ 17
4.2 Acceptance inspection____________________________ 18
4.3 Preparations for installation ________________________ 18
4.4 Distribution of oil _________________________________ 18
4.5 Electrical connection______________________________ 18
4.6 Burner installation ________________________________ 19
4.7 Check oil line seals _______________________________ 19
5. Basic settings ______________________________________ 21
5.1 Calculate prepurge time___________________________ 21
5.2 Examples of basic setting B30 _____________________ 22
5.3 Setting values for nozzle assembly B 30 _____________ 23
5.4 Setting values for air damper B 30 __________________ 23
5.5 Nozzle assembly adjustment, brake plate ____________ 24
5.6 Air setting_______________________________________ 24
5.7 Setting the air pressure switch _____________________ 24
6. Burner servicing ____________________________________ 25
6.1 Servicing the combustion assembly ________________ 25
6.2 Servicing air dampers_____________________________ 26
6.3 Servicing the fan _________________________________ 27
6.4 Replacing the oil pump ___________________________ 28
6.5 Vibration________________________________________ 29
7. Instructions Pump __________________________________ 30
7.1 SUNTEC D(V) 57C _______________________________ 30
8. Replacement of electrical components ________________ 36
9. Electrical equipment ________________________________ 37
9.1 Wiring diagram _________________________________ 37
9.2 Component. ____________________________________ 38
10. Control __________________________________________ 39
10.1 Technical data ___________________________________ 39
10.2 LED indicator lamps ______________________________ 39
10.3 Explanation of the different sequence modes _________ 40
10.4 BurnerPro LED fault/lock code table ________________ 41
11. Fault Location ____________________________________ 45
11.1 Burner will not start_______________________________ 45
11.2 Burner will not start after normal use ________________ 45
11.3 Delayed ignition__________________________________ 46
11.4 Noise in pump ___________________________________ 46
11.5 Pump pressure __________________________________ 46
12. Log of flue gas analysis____________________________ 47
13. Oil burners maintenance instructions _______________ 48
