Bernafon Nano RITE Montageanleitung

Nano RITE

Hearing Systems

FITTING GUIDE

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 1 14.03.13 13:37

Nano RITE

Hearing Systems

FITTING GUIDE

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 1 14.03.13 13:37

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 2 14.03.13 13:37

NANO RITE HEARING SYSTEMS

Nano RITE Hearing Systems – Overview 5

Selection Chart for Acoustic Options 6

Fitting Ranges 7

Selecting the Speaker Unit Length 8

Attaching the Speaker Unit to a Nano RITE Hearing System 9

Detaching the Speaker Unit from a Nano RITE

Hearing System 10

M-Speaker Unit 11

Custom Molds for the M-Speaker 12

Attaching the Lite Tip and the Micro Mold to the

M-Speaker Unit 13

Detaching the Micro Mold from the M-Speaker 14

Detaching the Lite Tip from the M-Speaker 14

P-Speaker Unit for Power Fittings 15

Using the Measurement Gauge 15

Custom Fit with Power Mold 16

Attaching and Detaching Power Mold to and from

P-Speaker Unit 16

Changing from a Power Dome to a Power Mold 17

Changing the NoWax Filter and the WaxStop 18

WaxStop System 18

NoWax System 18

Fitting a Nano RITE with Oasis 19

Attaching the Programming Cables 19

Ordering Information 20

Fitting Guide

Nano RITE Hearing Systems

Table of Contents

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 3 14.03.13 13:37

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 4 14.03.13 13:37

NANO RITE HEARING SYSTEMS

The Nano RITE receiver-in-the-ear hearing instrument is easy to handle and comfortable to wear.

Its unique design in combination with advanced technology delivers tangible end user bene ts.

This guide is designed to help you  t and manage Nano RITE hearing systems.

1 Push button

2 Microphone

2a Second

microphone

3 Connector plug

4 Wire

5 Left/right indicator

6 Speaker

7 Speaker unit size

marking

8 Battery drawer

9 Ear grip

10 NoWax  lter

Nano RITE Hearing Systems – Overview

CN_ILLU_NRInstrumentwithSpeaker_BW_HI

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 5 14.03.13 13:37

Selection Chart for Acoustic Options

Speaker Unit Fitting

Type

Wax

Protection

Speaker Unit

Ear Pieces

Wax

Protection

Custom Mold

M-Speaker Instant NoWax Open Domes

(6, 8, 10)

Tulip Dome Power Domes

(6, 8, 10, 12)

Custom Micro Mold Canal Mold Canal Lock Skeleton WaxStop

Lite Tip

P-Speaker Instant WaxStop Tulip Dome Power Domes

(6, 8, 10, 12)

Custom Power Mold WaxStop

NoWax

CN_ILLU_NRCostumMoldPspeakerDetaching_BW_HI

CN_ILLU_NRMspeaker_BW_HI

CN_ILLU_NRPowerDometoPowerMoldChanging1_BW_HI

LT_ILLU_LiteTipDescription_BW_HI

Custom

CN_ILLU_NRPowerMoldtoPowerDomeChanging1_BW_HI

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 6 14.03.13 13:37

NaNo RITE HEaRINg SySTEmS

fitting Ranges

Nano RITE hearing systems offer two speaker units: the M-Speaker, which is appropriate for mild to

moderately severe losses, while the P-Speaker provides additional power for severe hearing losses.

Expected tting ranges with different ear pieces are shown below.

250 500 1. 000 2.000 4.000 10 .000

10 0

120

250 500 1. 000 2.000 4.000 10 .000

10 0

120

250 500 1. 000 2.000 4.000 10 .000

10 0

120

250 500 1. 000 2.000 4.000 10 .000

10 0

120

250 500 1. 000 2.000 4.000 10 .000

10 0

120

M-Speaker Unit

P-Speaker Unit

Open Dome Tulip Dome Micro Mold / Lite Tip / Power Dome

Tulip Dome Power Mold/Power Dome

dB HL

Hz Hz Hz

Hz Hz

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 7 14.03.13 13:37

CN_ILLU_NRMeasurementT ool_BW_HI

1 Place the measurement tool over the ear,

keeping the top line horizontal. With your eyes

at the same level as the ear, determine which

mark is closest to an imaginary line running

over the top of the ear canal. In this example,

the correct choice is size 2.

Power Molds will have a better  t if you

choose a slightly longer wire length than you

would when  tting a Power Dome. If the top

of the ear canal falls between two numbers on

the gauge, choose the higher number.

2 If the speaker unit wire is too long the hearing

instrument will fall back over the ear and the

microphones will point vertically instead of

horizontally. It is also unlikely that the receiver

wire will  t the contours of the ear correctly.

3 If the speaker unit wire is too short, it will

have a tendency to move out of the ear canal,

and the hearing instrument will lose stability

on the ear.

Selecting the Speaker unit Length

CN_ILLU_NR_Wearing instrument2_BW_HI_r

Four receiver lengths are available for both the M-Speaker and the P-Speaker. No. 1 is the shortest

while no. 4 is the longest. Before  tting Nano RITE hearing instruments, it is necessary to determine

the correct speaker unit length. The measurement procedure is the same for both the M-Speaker and

the P-Speaker.

Wire too long

Wire too short

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 8 14.03.13 13:37

NANO RITE HEARING SYSTEMS

CN_ILLU_NR_SpeakerUnitAttaching4_BW_HI

Attaching the Speaker Unit to a Nano RITE Hearing System

Correct speaker unit attachment is imperative.

1 Slide the connector plug into the connector

socket of the instrument. Take care to align the

pins in the connector plug with the socket.

2 When the connector plug is correctly aligned,

push it gently into place.

3 Take the lock pin out of the packaging in which

the speaker unit is delivered (tweezers make

this easier). Insert the lock pin with the

tweezers.

4 Ensure that the lock pin is fully inserted into

the hearing instrument. Use the back side of

the tweezers tool if necessary.

5 To test the attachment of the speaker unit to

the hearing instrument, gently pull the speaker

wire near the connection to the hearing

instrument as shown. If the speaker comes

off, then it was not attached properly.

CN_ILLU_NRSpeakerUnitAttaching2_BW_HI

CN_ILLU_NRSpeakerUnitAttaching3_BW_HI

1 – 2

CN_ILLU_NR_SpeakerUnitAttaching5_BW_HI

Speaker units can easily sustain internal

damage if dropped. Before you attach the

speaker unit, please place a dome on the

speaker to protect it.

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 9 14.03.13 13:37

CN_ILLU_NRSpeakerUnitDetaching3_BW_HI

CN_ILLU_NRSpeakerUnitDetaching1_CMYK_HI

CN_ILLU_NRSpeakerUnitDetaching2_BW_HI

detaching the Speaker unit from a Nano RITE Hearing System

1 Use the pointed end of the disassembly tool to

push the lock pin free.

2 Hold the instrument rmly with one hand

and with the other hand hold the edge of the

connector plug between your thumb and

forenger.

3 Gently pull the connector plug out of the

socket. If it does not come out easily, verify

that the lock pin is completely free.

4 Avoid losing the lock pin due to the fact that

you will need it for reattaching the speaker to

the hearing instrument.

Do not attempt to detach the speaker unit

by pulling on the wire without pushing

the lock pin free. This could damage both

the speaker unit and the hearing

instrument.

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 10 14.03.13 13:37

NANO RITE HEARING SYSTEMS

M-Speaker Unit

The M-Speaker unit is suitable for mild to moderately severe losses and comes in four lengths. It can

be used for both instant and custom ttings.

1 To obtain a more secure hold in the ear canal,

an ear grip should be used. The same version

works for both the left and the right ear. Insert

the ear grip in the slot in the receiver as

shown, noting the orientation.

If the ear grip seems too long, it may be

trimmed to the desired length. Be careful not

to leave a sharp end when cutting since this

could cause irritation in the ear.

2 To remove the ear grip, push it in the opposite

direction.

CN_ILLU_NREarGripMspeakerAttaching1_BW_HI

CN_ILLU_NREarGripMspeakerAttaching2_CMYK_HI

CN_ILLU_NREarGripMspeakerAttaching3_CMYK_HI

CN_ILLU_NREarGripMspeakerAttaching4_BW_HI

During insertion, the top of the ear grip

should point towards the speaker wire as

illustrated. Pull the ear grip down until

the top disappears into the slot.

If inserted in the wrong direction, the

ear grip will not be oriented properly to

place in the concha.

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 11 14.03.13 13:37

LT_ILLU_LiteTipNoWaxFilter_CMYK_HI

1 12 3 44 5

Custom Molds for the M-Speaker

For custom  ttings two different types of molds can be attached to the M-Speaker. The Micro Mold

and the Lite Tip come with an adapter already inserted, colored red (right) or blue (left) to indicate

which ear. The color dot on the top of the custom mold indicates the front and top position in the ear

canal.

Tools for Custom Molds

To attach and detach the M-Speaker unit to and from a custom mold, two different tools are designed

to be used.

Lite Tip Tool for Lite Tip and Micro Mold

·attaching the Lite Tip or the Micro Mold onto the M-Speaker unit

·detaching the M-Speaker unit from a Lite Tip

Disassembly Tool for Micro Mold

The Micro Mold disassembly tool is intended for detaching the Micro Mold from the M-Speaker.

1 Front-top indicator

2 Micro Mold adapter

3 WaxStop  lter

4 Pull-out string

5 Lite Tip adapter

6 NoWax  lter

CN_ILLU_NRCostumMoldPspeakerDetaching_BW_HI

For mounting a curved

speaker (in any mold) For dismounting a speaker

from a Lite Tip

Micro Mold Lite Tip

For mounting a curved

speaker (in any mold)

For dismounting a speaker

from a Lite Tip

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 12 14.03.13 13:37

NaNo RITE HEaRINg SySTEmS

Attaching the Lite Tip and the Micro Mold to the M-Speaker Unit

CN_ILLU_NRCostumMoldPspeakerAttaching3_CMYK_HI

1 Use the cup pin of the Lite Tip tool for curved

receivers.

2 Place the receiver into the tool and push the

wire into the groove to obtain a stable

attachment. Make sure that the NoWax is on

the receiver (see page 18).

3 Before inserting the receiver into the mold,

turn the receiver so that the wire and up

marking on the mold are properly aligned.

Carefully center the receiver in the middle of

the adapter before pushing it in.

4 Insert the receiver into the custom mold.

4 a) Micro Mold: Align and  rmly insert the

M-Speaker unit into the Micro Mold until

it clicks into place. This should be done

carefully.

4 b) Lite Tip: Place the Lite Tip against the table

and push the receiver  rmly in place. Make

sure that the front of the receiver is fully

inserted and  ush with the front of the

Lite Tip. This should be done carefully.

5 Make sure that the mold sits correctly in the

patient’s ear and check the position of the

wire. If necessary the wire is bendable by

heating.

LT_ILLU_LiteTipOnMspeakerAttaching1_CMYK_HI

LT_ILLU_LiteTipOnMspeakerAttaching2_CMYK_HI

LT_ILLU_LiteTipOnMspeakerAttaching3_CMYK_HI

LT_ILLU_LiteTipOnMspeakerAttaching4_CMYK_HI

4 b)

4 a)

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 13 14.03.13 13:37

Detaching the Micro Mold from the M-Speaker

CN_ILLU_NRCostumMoldPspeakerDetaching_BW_HI

It is not possible to detach the Micro Mold

or the Lite Tip without the appropriate

tool.

1 Carefully align the tool with the center of the

Lite Tip.

2 Press the tool into the Lite Tip to release

the M-Speaker unit while firmly holding the

Lite Tip.

3 The Lite Tip can now be removed from the

M-Speaker unit.

1 Remove the WaxStop from the Micro Mold

(see page 18).

2 Insert the disassembly tool into the Micro

Mold adapter, making sure to align with the

cross as illustrated.

3 Push the disassembly tool into the Micro Mold.

The Micro Mold will disengage with a click.

Detaching the Lite Tip from the M-Speaker

LT_ILLU_LiteTipFromMspeakerDeataching1_CMYK_HI

LT_ILLU_LiteTipFromMspeakerDeataching2_CMYK_HI

LT_ILLU_LiteTipFromMspeakerDeataching3_CMYK_HI

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 14 14.03.13 13:37

NaNo RITE HEaRINg SySTEmS

1 – 2

P-Speaker Unit for Power Fittings

The P-Speaker unit contains a high performance receiver which requires ample room in the ear canal.

To determine if your client’s ear canal can accommodate this receiver, please use the measurement

gauge supplied. This step is necessary for both instant ttings with the Power Dome and custom

ttings with molds.

Using the Measurement Gauge

1 Hold the handle of the measurement

gauge so that the at side of the handle

is up.

2 Insert the gauge into the ear canal (with

the at side up) until the size indicator is

fully surrounded by the ear canal. If the

size indicator ts easily within the ear

canal, the client is an excellent candidate

for the P-Speaker unit.

3 If the size indicator does not t in the ear

canal but is hidden behind the tragus when

viewing from a 45° angle, the P-Speaker

with Canal Mold can still be produced.

4 If the size indicator is visible when viewed

from a 45° angle, the client is NOT a candidate

for the P-Speaker unit.

Size indicator Flat side

Handle

The gauge must be cleaned and sterilized

properly before re-use. First clean any

visible cerumen from the gauge with a

clean dry or moist tissue. Next soak the

gauge in a cold sterilant for at least

hours.

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 15 14.03.13 13:37

CN_ILLU_NRPowerMoldtoPspeakerAttaching2_BW_HI

CN_ILLU_NRPowerMoldtoPspeakerAttaching1_BW_HI

Custom Fit with Power Mold

Attaching and Detaching Power Mold to and

from P-Speaker Unit

1 Hold the P-Speaker unit in one hand and the

Power Mold in the other hand, positioned as

illustrated.

2 Insert the P-Speaker unit into the mold until it

is fully covered and recessed by approx. 1 mm.

3 Use the back of the special screwdriver

(see page 22) if needed.

4 Place the locking plate on the receiver housing

and use the special screwdriver to turn the

locking plate approx. 45º clockwise until it

locks into the grooves of the shell.

5 Next snap the cover into the faceplate,

covering the receiver housing and surrounding

the base of the tubing for reduced visibility.

Power Molds are made from an impression similar to one needed for an in-the-canal hearing instrument.

It is possible to include a vent up to a maximum of 2.4 mm if speci ed at the time of order.

To remove the P-Speaker unit,  rst remove the

cover by very gently sliding the special screw

driver between the tube and the cover and then

apply a slight upwards pressure. Using the special

screwdriver, turn the locking plate counterclock-

wise by approx. 45°. You will feel it release

slightly, then remove the plate.

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 16 14.03.13 13:37

NANO RITE HEARING SYSTEMS

CN_ILLU_NRPowerDometoPowerMoldChanging2_BW_HI

Changing from a Power Dome to a Power Mold

1 Remove the transparent cover on the

dome adapter by gently prying it off with

a screwdriver.

2 Use the screwdriver to unlock the locking plate

by turning it approx. 45° counter-clockwise.

3 Remove the dome adapter from the

P-Speaker unit.

4 Remove the speaker unit seal from the

P-Speaker unit.

Follow the instructions on page 16 to attach the

Power Mold to the P-Speaker unit.

CN_ILLU_NRPowerDometoPowerMoldChanging1_BW_HI

A new speaker unit seal must be used

each time the speaker unit is attached to

the shell. Do not roll the speaker unit seal.

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 17 14.03.13 13:37

Changing the NoWax filter and the WaxStop

1 Take the stick with the new WaxStop on it.

On the opposite end is a removal socket

for the old WaxStop.

2 Insert the removal plug into the opening of the

old WaxStop and pull it out slowly. Keep the

stick straight.

3 To insert the new WaxStop turn the stick

around and place the new part in the sound

outlet and gently remove the stick.

4 Discard the used stick with the old WaxStop.

It cannot be reused.

1 Remove a tool from the turtle, insert its empty

end into the old  lter and pull it out.

2 Push a new  lter into the speaker outlet.

3 Discard the used tool. It cannot be reused.

CN_ILLU_NRWaxStopChanging_BW_HI

CN_ILLU_NRWaxStopChanging1_BW_HI

CN_ILLU_NRWaxStopChanging2_BW_HI

NoWax System

The NoWax system is applicable for the following acoustic setups:

·M-Speaker coupled with a dome or Lite Tip

·P-Speaker coupled with a Power Mold

Visually inspect the NoWax  lter in the end of the speaker unit. If it is clogged or there is no sound

coming from the device, replace the NoWax  lter.

WaxStop System

The WaxStop system is applicable for the following acoustic setups:

·M-Speaker coupled with a Micro Mold

·P-Speaker coupled with any ear piece (instant and custom solutions)

The WaxStop should be changed as needed, to ensure ef cient wax protection, and to prolong the life

of the speaker unit.

CN_ILLU_NRNoWaxGuardChanging_BW_HI

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 18 14.03.13 13:37

NANO RITE HEARING SYSTEMS

Nano RITE hearing systems are programmed with Oasis using new standard (no. 2) programming cables.

Please always insert a fresh battery prior to programming.

For your convenience, wireless Nano RITE hearing instruments are compatible with the nEARcom

wireless programming system (depends on hearing instrument product family).

Fitting a Nano RITE with Oasis

Attaching the Programming Cables

1 Remove the cover with the screwdriver

as shown.

2 Plug the cable into the connector.

3 To replace the cover, hook the top end under

the shell rst, then snap it gently into place.

CN_ILLU_NRProgCablesAttaching1_BW_HI

CN_ILLU_NRProgCablesAttaching2_BW_HI

CN_ILLU_NRProgCablesAttaching3_BW_HI

134056_NR_Fitting_Guide_generic_US_Private_Label.indd 19 14.03.13 13:37

Andere Handbücher für Nano RITE

Inhaltsverzeichnis

Andere Bernafon Hörgerät Handbücher

Bernafon

Bernafon PRECISO 9 Bedienungsanleitung

Bernafon

Bernafon NEO Bedienungsanleitung

Bernafon

Bernafon Chronos Bedienungsanleitung

Bernafon

Bernafon Acriva Montageanleitung

Bernafon

Bernafon miniRITE T R Bedienungsanleitung

Bernafon

Bernafon ACRIVA 9 Betriebsanleitung

Bernafon

Bernafon SOUNDGATE Bedienungsanleitung

Bernafon

Bernafon Alpha miniBTE T Bedienungsanleitung

Bernafon

Bernafon supermia Bedienungsanleitung

Bernafon

Bernafon Viron Series Bedienungsanleitung

Bernafon

Bernafon XTREME Bedienungsanleitung

Bernafon

Bernafon Juna 9 Pico RITE Abmessungen

Bernafon

Bernafon ACRIVA 9 Bedienungsanleitung

Bernafon

Bernafon SoundGate 3 Bedienungsanleitung

Bernafon

Bernafon HEARTOO 120 I Bedienungsanleitung

Bernafon

Bernafon CHRONOS 9 Bedienungsanleitung

Bernafon

Bernafon Nevara Bedienungsanleitung

Bernafon

Bernafon Alpha 9 MNR T R Bedienungsanleitung

Bernafon

Bernafon Win 302 Fehlerbehebungshandbuch

Bernafon

Bernafon MOVE Series Bedienungsanleitung

Bernafon

Bernafon VERAS 9 Bedienungsanleitung

Bernafon

Bernafon CHRONOS 9 Montageanleitung

Bernafon

Bernafon Carista Bedienungsanleitung

Bernafon

Bernafon VERITE 7 Montageanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung