Bernard Q200 Anwendungshandbuch

Issued July 2007 • Index No. SPEC Q234-1.2

Q-Gun™

Series

200, 300, 400 Amp MIG Guns

USA

Made with

Pride and without

Compromise in the

All Guns are Not Created Equal.

A MIG gun should be durable, easy to

use and customized to your specific

application. Our MIG guns put you in

control: you choose the options you need

and we'll build a gun to last. We even

ship most of our guns within 24 hours.

CenterfireTM contact tips, nozzles and diffusers

are easy-to-use and high performing - they

provide better arc starts, less spatter and more

consistent welds - and also last up to three times

longer than competitive brands.

Necks available in fixed, rotatable and multiple

length options for optimal weld accessibility and

improved operator comfort. Rotatable necks

changeover without tools.

Patented Jump Liner allows quick neck change

and replacement of only most commonly worn or

clogged liner area, which reduces the amount of

time a gun is offline and minimizes inventory.

Liners coiled in-house with proprietary process

that improves wire feed performance and 100

percent tested to ensure smoothest wire feed in

the industry.

Multiple handle and trigger options to increase

operator comfort.

Power cable equipped with Stay-Tite™

Technology and internal gas hose that resists

kinking, improves gas flow and feedability.

Back end with durable rigid strain relief and

easily interchangeable direct plugs and trigger

leads connect to wire feeders and machines

from major manufacturers and allow simple

maintenance.

Phone: 800-946-2281 (US Only) 708-946-2281 (Outside US)

Fax: 708-946-6726

For more information, visit us at BernardWelds.com

Stay-Tite™ Technology

Long-lasting power cable

compression fittings

and necks with large

tapered gun connections

combine to form the

foundation of Bernard®

Stay-TiteTM technology.

This technology ensures

optimal conductivity to

increase weld consistency

and lessen heat output

while improving product

durability.

Q400 MIG Q-GunTM shown

with curved handle, medium

45˚ rotating neck and standard

trigger.

Industrial Workhorse Q200,

Q300 and Q400 MIG Guns are

easy-to-use and designed for

exceptional performance and

comfort in the most demanding

industrial environments.

Amperage Ratings

Q-Gun Duty Cycle Description

100% NEMA 100%CE 60% CE 35%CE

Q200 250 200 240 325 CO2 Gas

n/a 175 200 240 80%AR20%CO2

Q300 350 320 370 470 CO2 Gas

n/a 270 310 390 80%AR20%CO2

Q400 400 350 425 520 CO2 Gas

n/a 285 350 440 80%AR20%CO2

Bernard®

An Illinois Tool Works Company

449 West Corning Road, Box 667

Beecher, Illinois 60401 USA

AMP

910 10 10

Replacement Parts List

*1880155 & 1880198 Handle Kits include halves, screws & posts. DSA-1

Handle Kits include halves, screws, posts, toggle switch and guard.

**Patent Pending

†1982, 1983Q & 1984Q Rear Cone Nut Repair Kits include jacket clamp,

conduit clamp, cone nut, end fitting, nipple, spacer & butt connectors.

ITEM Q200 Q300 Q400

# PART # PART # PART # DESCRIPTION

1 See Centerfire Spec Sheet Nozzle Assy

2 See Centerfire Spec Sheet Contact Tip

3 See Centerfire Spec Sheet Gas Diffuser

4 See Centerfire Spec Sheet Cap

5 See Neck Spec Sheet Neck

6 See Jump Liner Spec Sheet Jump Liner

7 4213B 4313B Stay-Tite™ End Fitting

8 4305 1540003 Stay-Tite™ Cone Nut

NS 4991 1520017 Conduit Clamp (2 Req'd)

NS 4823 4939 Jacket Clamp (2 Req'd)

9 1880155 1880198 Handle Kit, Standard Trigger*

Handle Kit, Locking Trigger*

Handle Kit, Dual Pull Trigger*

N/A DSA-1 Handle Kit, D/S, Std. Trigger*

Handle Kit, D/S, Locking Trigger*

10 5662 Trigger, Standard

5662L** Trigger, Locking

2690001 Trigger, Dual Pull, 3 Wire

(With Insulated Terminals)

11 4207 Post Fastener (1 Req'd - Q200

& Q300) (5 Req'd - Q400)

2030004 N/A Post Fastener, Short (4 Req'd)

12 4209 Handle Screw (5 Req'd)

13 2660001 Terminal, Quick Disconnect

(2 Req'd)

14 N/A 2520042 Handle Spring

15 Replacement Cable With Fittings

1060120 1060108 1060114 8' (2.44 m)

1060121 1060109 1060115 10' (3.05 m)

1060122 1060110 1060116 12' (3.66 m)

1060123 1060111 1060117 15' (4.57 m)

1060124 1060112 1060118 20' (6.10 m)

1060125 1060113 1060119 25' (7.62 m)

16 2520033 2520041 Strain Relief

17 Rigid Strain Relief Kit

(Includes: Top & Bottom Halves)

2520073 Strain Relief with Installed Gas

Pin (Bernard Direct Plug)

2520069 Strain Relief (Euro Direct Plug)

2520066 Strain Relief (All Other DP's)

18 4932 Butt Connector (2 Req'd)

19 See Direct Plug Spec Sheet Direct Plug Components

20 See Liner Spec Sheet Liner

21 1880012 Heat Shield Kit (Includes:

Heat Shield, Screws, Posts,

& Spacers)

22 1790002 Hang Up Hook Kit

(Includes: Hook, Screw, & Post)

23 1982 1983Q 1984Q Rear Stay-Tite™ Repair Kit†

24 1010027 Adapter Block (Not Req'd on

Bernard or Euro Direct Plug)

25 W11127-002 Screw, Strain Relief (Not Req'd

on Bernard Direct Plug)

26 GN2021 Electrical Plug - Non D/S (Not

Req'd on Bernard or Euro DP)

20006A Electrical Plug - D/S (Not Req'd

on Bernard or Euro Direct Plug)

Dieses Handbuch passt für folgende Modelle

Andere Bernard Schweißsystem Handbücher

Bernard

Bernard MIG Gun Configurator Bedienungsanleitung

Bernard

Bernard Clean Air CL30 Bedienungsanleitung

Bernard

Bernard Clean Air MIG Gun Series Bedienungsanleitung

Bernard

Bernard Q20 Series Bedienungsanleitung

Bernard

Bernard S-Gun Series Bedienungsanleitung

Bernard

Bernard Air-Cooled Automatics ACAPTS-1.0 Bedienungsanleitung

Bernard

Bernard Q and S Series QS234X-1.1 Bedienungsanleitung

Bernard

Bernard TG Series Bedienungsanleitung

Bernard

Bernard TGX Series Bedienungsanleitung

Bernard

Bernard Dura-Flux Series Bedienungsanleitung

Bernard

Bernard W-Gun Series Bedienungsanleitung

Bernard

Bernard 195399 Bedienungsanleitung

Bernard

Bernard CLEAN AIR SERIES Bedienungsanleitung

Bernard

Bernard T-Gun 500 amp Bedienungsanleitung

Bernard

Bernard Q150X-1 Anwendungshandbuch

Bernard

Bernard Q1501.3 Bedienungsanleitung

Bernard

Bernard T-Gun 445-45 Bedienungsanleitung

Bernard

Bernard Q Series Bedienungsanleitung

Bernard

Bernard TGX Series Bedienungsanleitung

Bernard

Bernard Clean Air Gun CA-1.5 Bedienungsanleitung

Bernard

Bernard Q20 Series Bedienungsanleitung

Bernard

Bernard Q-Gun Q150-1.4 Bedienungsanleitung

Bernard

Bernard 600 Amp W-Gun Bedienungsanleitung

Bernard

Bernard OM-BTB-2.7 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung