Bernee BN-5606H0/M0 series Bedienungsanleitung

Integrated Speed Dome Cameras

User Manual

BN-5606H0/M0 Series

BN-5606H2/M2 Series

BN-5606H3/M3 Series

Please read this User Manual carefully to ensure that

you can use the device correctly and safely.

PRECAUTIONS

FEATURES

DOME SPECIFICATIONS

OPERATION

INTEGRATED SPEED DOME CAMERA SPECIFICATIONS

EMBED DED DOME INSTALLATION

CEILING MOUNT DOME INSTALLATION

ERRORS & SOLUTIONS

MAINTAIN

CHART OF SWITCHER SETTING

Chart A . Baud Rate Setting

WIRES S UGGESTED

WALL MOUNT D OME I NSTALLATION

INTRODUCTIONS

DIMENSIONS

Chart B. Protocol Rate Setting

Chart C. A ddress Setting

INDEX

PRECAUTIONS

Before attempting to connect or operate this product, please read these instructions completely:

1) Installed and maintained by qualified person as well as meet local codes.

2) Indoor designed dome camera must be used indoors but not outdoors of rainy, moist, etc).

3) Reinstalled or repaired over, must check resistance whether correct between circuit and shell part to confirm

insulation in order to avoid short-circuit.

4) Installing holder should withstand four dome units weight.

This mark refers to the dangerous voltage

This mark refers to the operations &

maintains must be directed

WIRES SUGGESTED

2 2 2 2

Diameter of Line 0.5mm (20#) 1.0mm (18#) 1.5mm (16#) 2.5mm (14#)

72W Power-supply (indoor dome) 25M(94ft) 45M(150ft) 70M(238ft) 110M (380ft)

72W Power-supply (outdoor dome) 10M(37ft) 18M(60ft) 28M(95ft) 45M (152ft)

Cable Models Max. Distance Cable Models Max. Distance

75-2 150M 75-5 ≈370M

75-3 ≈M 75-7 ≈500M

75-4 ≈270M 75-9 ≈700M

200

2) Video cable requirements:

1) 24V power line distance & requirements:

Notes:same model cables have differences by manufacturers, above numbers are the commons.

Product and instruction includes below marks:

These serial integrated dome cameras apply for bank, airport, traffic, government, electric power, prison, hostel,

commercial building, plant, school, museum, etc.

High-performance DSP designs with strong stability.

Built-in lossless data setting of power-off

RS-485 bus control

Manual/auto tour control coordinates with camera zoom ratio, proportional speed-down, stable operation, exact position.

128(255) preset positions randomly store, exactly position.

6 tour routes, preset-points interval time adjustable (adjusted by customer, high speed domes fitted).

Horizontal 360° endless rotate no blind zone.

Automatically vertically 180° endless flip. (High speed domes fitted)

Auto iris, auto focus and auto white balance

WDR function: suit complex light environments.

Night vision function: automatically adjust CCD luminance according to ambient light intensity changes (day/night models

fitted).

Backlight compensation function: in strong light conditions can see all objects.

Precise motor drives, operate stably, control sensitively, low consumption, low noise.

Standard alarm-in/out port, preset position links alarm-in.

All-in-one design, concise structure, high reliable

(Some models support this function)

INTRODUCTIONS

FEATURES

- 1 -

DOME SPECIFICATIONS

Notes:we stress development, parameters upgrade without notification

OPERATION

SONY, CANON, CNB, SAMSUNG

At 8-digit and 6-digit switchers set dome ID, baud rate and control protocol; Connect 485 line and AC wire.

Virgin dome is powered-on, motherboard indicator light flickers fast, then shut, horizontally (pan) rotate 2 circles,

vertical (tilt) rotate and stop at 0°position, till now the motherboard indicator light shines, dome camera enters normal

work state (light flickers every 2 minute).

Fitted cameras:

Preparation:

Power-on for self test:

Models High speed dome Middle speed dome

Pan Rotation Range 360° random

Pan Speed 0.5~300°/s 0.5~180°/s

Tilt Rotation Range 0~90°; 180° auto flip 0~90°

Tilt Speed 0.5~300°/s 0.5~100°/s

Communication RS485

Preset Positions 128(255) units

Tour routes 6 defaults routes

Power Supply AC24V

Power Consumption 20W(indoor models) / 40W(outdoor models)

Operation Temperature -30~55℃(Indoor Types)/ -30~65℃(Outdoor Types)

Step by the below:

1) Use keypad input camera number of preset position, press CAMERA to select camera.

2) Operate joystick, zoom button, focus button to adjust image.

3) Input specified preset position number, press SET button to save preset scene parameters.

Keyboard CALL button allows you call out and see preset cameras image. The follow steps show how to view these

preset positions:

1) Use keypad input camera number of the called, press CAMERA button to select camera.

2) Input number of preset position of the called, press CALL button, camera turns to the specialized position. Lens

zoom, focus and iris auto convert to the preset parameters. The image of preset camera displays on monitor.

Preset position setting (1#~64#; 101#~255#):

Call preset positions (1#~64#; 101#~255#):

Zoom-in or zoom-out lens to get featured images or wide-angle images. Hold on pressing TELE button, objects being

closer, object image larger gradually. Hold on pressing WIDE button, objects being farther, object image smaller

gradually.

If you quickly press and release zoom button, monitor image only changes a little. Image changes degree depends on

the lasting time of holding zoom button.

Long-focus lens and wide angle lens (zoom control):

After selecting one dome, can manually control dome rotation by joystick on keyboard. Joystick lead dome rotating

with three kinds of moving: up-down, left-right, diagonal line

Control dome full directions rotation:

Focus is a process of adjusting image clarity. Hold on pressing FAR button, far objects turn clear, and near objects

turn vague. Hold on pressing NEAR button, near objects turn clear, far objects turn vague. Adjust focus buttons until

monitor image turns clear. The same with ZOOM button, focus changes degree depends on the lasting time of holding

focus buttons.

Lens focus control:

- 2 -

In accordance with current lens multiples auto adjust speed of rotation.

High speed domes support 8-channel alarm input and 2-channel alarm output (middle speed dome serials cameras

support 2-channel alarm-input and 1-channel alarm-output). 1# alarm matches with 101# preset position; 2# alarm

matches with 102# preset position; 8# alarm matches with 108# preset position. Any channel alarms, 2 channels relays

alarm; call 100# preset position, then relays stop outputting.

After settling start-point and end-point, scan begins with clockwise direction until to the end-point, then scan back

from end-point to start-point. By this way scanning till receiving any command (as sheet below):

Proportional speed-shift:

Alarm linkage: (optional function)

Point-to-point constant scanning:

Attached chart: command list for dome and camera (all dome models fitted)

Notes: ¤” means this function Available; “ N means Not Available“ A ”

Preset Position

Number

Call Preset Positions

Set Preset Position

Dome/Camera Control Content

65 Run first route (Sequential scan of 1#~16# preset positions) ¤ NA

66 Run second route (Sequential scan of 17#~32# preset positions) ¤ NA

67 Run third route (Sequential scan of 33#~48# preset positions) ¤ NA

68 Run fourth route (Sequential scan of 49#~64# preset positions) ¤ NA

69 Run fifth route (Sequential scan of 101#~128# preset positions) ¤ NA

70 Run all sequential scans of confirmed preset positions ¤ NA

71 Clockwise 360°scan (low speed) ¤ NA

72 Clockwise 360°scan (middle speed) ¤ NA

73 Clockwise 360°scan (high speed) ¤ NA

74 Anti-clockwise 360°scan (low speed) ¤ NA

75 Anti-clockwise 360°scan (middle speed) ¤ NA

76 Anti-clockwise 360°scan (high speed) ¤ NA

77 Set duration time of preset position ¤ ¤

78 Zero calibration ¤ NA

79 Mirror Off On

80 Screen Display Off On

81 Digital zoom Off On

82 Color Off On

83 Backlight compensation Off On

84* Manually switch ICR Off On

85 Negative image Off On

86* Auto switch ICR Off On

87 White balance mode Manual Auto

88 View state of dome ¤ NA

89 Exposure mode Manual Auto

90 Focus mode Manual Auto

91 Back to Factory Settings ¤ NA

92 Call menu ¤ ¤

93 View version of dome ¤ NA

94 Eliminate single preset position (Once more within 5 seconds) ¤ NA

95 Eliminate all preset positions (Once more within 5 seconds) ¤ NA

96 Run linear scan / Set start of linear scan ¤ ¤

97 Set end of linear scan NA ¤

100 Shut alarm-output (be sure alarm-output exists)

¤ NA

Supplement:

Items SONY CANON CNB SAMSUNG

Preset Position Range 1~255 1~128 1~255 1~255

Preset Position Lasting (

Image Vertical-Flip(V-FLIP) √

91 Command

√92#command) √(77#command) × 77#command)

Period Setting

× × ×

#×√× ×

77# detention-time setting is similar to 92#

Cautions: This manual does not introduce setting methods of detail camera menus. If you want to change

camera parameters, please contact to dealer and ask for setting instructions of menus.

- 3 -

Set 92#, screen displays camera menu; call 92# or select EXIT button leaving menu. In menu state, WIDE, TELE,

NEAR and FAR means up, down, enter submenu and go back higher level menu. For setting parameter, NEAR and FAR

can increase or decrease numeral value. For Samsung cameras, OPEN and CLOSE are confirm buttons.

92# menu operation:

Dimensions

Indoor ceiling-mount dome Indoor wall mount dome Outdoor dome

152

100

140

114

200

170

4- 8

154

11 3

256

209

G1 1

390

Φ9

226

200

G1 1

Φ7

G11

Φ1 0 0

4 - 10

140

165

209

9 3

310

113

154

165

209

B N - B 5 6 0 6 C B N - B 5 6 0 6 B B N - B 5 6 0 6 E

G1 1

2G1 1

526

500

120

BN-B5606Q BN-B5606D

Integrated Speed Dome Camera Specifications

Image Sensor 1/4" SONY 1/4" SONY 1/4" SONY 1/4" SONY 1/4" SONY

Super HAD CCD Super HAD CCD Ex-view CCD Ex-view CCD Ex-view CCD

Horizontal Resolution 480TV Lines 480TV Lines 480TV Lines 480TV Lines 530TV Lines

Day/Nigh Function Manual/ Auto No Manual/ Auto Manual/ Auto Manual/ Auto

(ICR Filter) (ICR Filter) (ICR Filter)

Min. illumination Color:1Lux Color:1Lux Color:0.7Lux Color:1Lux Color:1.4Lux

B/W:0.01Lux B/W:0.002Lux B/W:0.01Lux B/W:0.1Lux

Optical Zoom 22x,f=4~88mm 18x,f=4.1~73.8mm 18x,f=4.1~73.8mm 26x,f=3.5~91mm 36x,f=3.4~122.4mm

Digital Zoom 10x 12x 12x 12x 12x

Video System PAL/NTSC PAL/NTSC PAL/NTSC PAL/NTSC PAL/NTSC

Wide Dynamic Range No No No No With

Privacy Function No 24 Zone 24 Zone 24 Zone 24 Zone

Total Pixel 795(H)×596(V)

Effective Pixel 752(H)×582(V)

Sync System Internal

Video Output 1.0V (p-p), 75 ohms, BNC

S/N Ratio >50dB

Built-in Module CANON SONY FCB-EX45CP SONY FCB-EX480CP SONY FCB-EX980P SONY FCB-EX1010P

Indoor Ceiling-mount Dome (High speed) BN-5606HH0 BN-5606LH0 BN-5606XH0 BN-5606NH0 BN-5606EH0

Indoor Wall mount Dome (High speed) BN-5606HH2 BN-5606LH2 BN-5606XH2 BN-5606NH2 BN-5606EH2

Outdoor Wall mount Dome (High speed) BN-5606HH3 BN-5606LH3 BN-5606XH3 BN-5606NH3 BN-5606EH3

Indoor Ceiling-mount Dome (Middle speed) BN-5606HM0 BN-5606LM0 BN-5606XM0 BN-5606NM0 BN-5606EM0

Indoor Wall mount Dome (Middle speed) BN-5606HM2 BN-5606LM2 BN-5606XM2 BN-5606NM2 BN-5606EM2

Outdoor Wall mount Dome (Middle speed) BN-5606HM3 BN-5606LM3 BN-5606XM3 BN-5606NM3 BN-5606EM3

Image Sensor 1/4" SONY 1/4" SONY Interline 1/4" SONY 1/4" Double Density 1/4" Double Density

Super HAD CCD Transfer CCD Super HAD CCD Interline Transfer Interline Transfer

Horizontal Resolution 480TV Lines Color:540TV Lines Color:550TV Lines Color:550TV Lines Color:550TV Lines

B/W:570TV Lines B/W:680TV Lines B/W:680TV Lines B/W:680TV Lines

Day/Nigh Function Manual/ Auto Manual/ Auto Manual/ Auto Manual/ Auto Manual/ Auto

(ICR Filter) (ICR Filter) (ICR Filter) (ICR Filter) (ICR Filter)

Min. illumination Color:1Lux Color:0.4Lux Color:0.4Lux Color:0.7Lux Color:0.7Lux

B/W:0.1Lux B/W:0.1Lux B/W:0.02Lux B/W:0.03Lux B/W:0.06Lux

Optical Zoom 27x,f=3.6~97.2mm 30x,f=3.3~99mm 33x,f=3.5~115.5mm 33x,f=3.5~115.5mm 37x,f=3.5~129.5mm

Digital Zoom 10x 10x 12x 12x 12x

Video System PAL/NTSC PAL/NTSC PAL/NTSC PAL/NTSC PAL/NTSC

Wide Dynamic Range No No No Wit h With

Privacy Function No 32 Zone 8 Zone 8 Zone 8 Zone

Total Pixel 795(H)×596(V)

Effective Pixel 752(H)×582(V)

Sync System Internal

Video Output 1.0V (p-p), 75 ohms, BNC

S/N Ratio >50dB

Built-in Module CNB M2760PDL SAMSUN SDM-310 SAMSUN SDM-332 SAMSUN SDM-335 SAMSUN SDM-375

Indoor Ceiling-mount Dome (high speed) BN-5606QH0 BN-5606TH0 BN-5606UH0 BN-5606WH0 BN-5606GH0

Indoor Wall mount Dome (high speed) BN-5606QH2 BN-5606TH2 BN-5606UH2 BN-5606WH2 BN-5606GH2

Outdoor Wall mount Dome (high speed) BN-5606QH3 BN-5606TH3 BN-5606UH3 BN-5606WH3 BN-5606GH3

Indoor Ceiling-mount Dome (middle speed) BN-5606QM0 BN-5606TM0 BN-5606UM0 BN-5606WM0 BN-5606GM0

Indoor Wall mount Dome (middle speed) BN-5606QM2 BN-5606TM2 BN-5606UM2 BN-5606WM2 BN-5606GM2

Outdoor Wall mount Dome (middle speed) BN-5606QM3 BN-5606TM3 BN-5606UM3 BN-5606WM3 BN-5606GM3

Slow Shutter: 0.001 Lux Slow Shutter: 0.0006 Lux

- 4 -

EMBEDDED DOME INSTALLATION

Step 1: drill a hole on ceiling Step 2: install embedded bracket

Step 3: set dome

Set dome bottom DIP switcher (SW1 and SW2) to

confirm control-protocol and dome address, similar

with label setting or switcher setting.

At the installation center of ceiling drill a hole of

3 m m d i a m e t e r, i n p u t s e l f - t r a p p i n g s c r e w t o

positioning-ruler hole, and then fix it on ceiling.

Use pencil and positioning-ruler drawing a circle,

dig away stuff.

Press embedded-bracket fixture, input fixture input

hole of ceiling until wholly entering. Unwrap the three

fixtures, tighten screw, and confirm that embedded-

bracket has already been fixed on ceiling.

Notes: embedded-bracket and ceiling must link

with steel belt so as to avoid dome dropping. The steel

belt should be offered by customer.

Power supply

24VAC

AC 1

GND

AC 2

RX+

RX-

Control signal

Monitor or other

video-input

devices

RS-485(Pelco)

Video out

CEILING MOUNT DOME INSTALLATION

Power line

Video line

Control line

Turn

According to bracket hole size, use pencil and

positioning-ruler drawing a circle (Φ40mm), dig away

stuff.

At the edge of circle, drill 3 holes (Φ6mm) matched

with 3 holes of bracket, then fill M6 anchor-screws on

each hole (anchor-screws are offered by customer).

Insert anchor-screws to 3 holes and fasten them

with pad & nut.

Insert 3 screw units into the

upper bracket hole, just like the

picture directing, confirm all

screws are tightened in locating

slot.

Connect video cable,

power line and control line with

mechanical module. As picture

directing.

Step 4: connect to mechanical module wiring

Step 1: open hole on ceiling Step 2: fix ceiling-mount bracket

Step 5: install dome

- 5 -

Step 3: set dome

Power supply

24VAC

AC 1

GND

AC 2

RX+

RX-

Control signal

Monitor or other

video-input

devices

RS-485(Pelco)

Video out

Set dome bottom DIP switcher (SW1 and SW2) to

confirm control-protocol and dome address, similar

with label setting or switcher setting.

Step 4: connect to mechanical

module wiring

Step 5: install dome

Connect video cable, power line and control line with

mechanical module. As picture directing.

Insert 3 screw units into the upper bracket hole,

just like the picture directing, confirm all screws are

tightened in locating slot.

Control line

Power line

Video line

Step 1: install outer shell

WALL MOUNT DOME INSTALLATION

Cautions: if it is outdoor installation, should confirm the sealing quality, and avoid approaching heat or moisture. As

variability of bracket type & installation, here only introduce installation method and steps of dome. But for bracket

installation, please refer to related instructions.

a. Video cable, power line and control line penetrate wall-mount

bracket until stretch out.

b. Then they penetrate outer shell hole until stretch out enough length.

c. As the picture, hang outer shell on bracket, screw-thread is sealed

with waterproof materials.

Turn

Step 2: install dome

a. Set dome bottom DIP switcher (SW1 and SW2) to confirm control-protocol and dome address, similar with label

setting or switcher setting.

b. Connect video cable, power line and control line with mechanical module. Then put and fasten mechanical module

into shell. As picture directing

Power line

Video line

Turn

Control line

- 6 -

Step 3: install transparent cap

Bolt one end of safety rope of transparent cover

to the screw bolt of outer shell. Take off 2 screws of

outer shell edge. Closely connect fixing hole of

transparent cover with screw hole of outer shell,

confirm matched holes directing to each other

exactly and transparent cover has been attached on

outer shell. Finally put and fasten 2 steel screws in

order to fix transparent cover.

Cautions: ahead of transparent-cover-cap covered

down, must connect well the power socket of

heater.

Video line

AC24VRed:

AC24VBlack:

Green: RS 485+

Yellow: RS 485-

ERRORS & SOLUTIONS

Errors Descriptions

Powered on, but no

reaction, no image and

no indicator shining

Powered on, self-test

well, having image, but

out of control

Fail to finish self-test,

having image but with

motor hums

Image Unstable

Image Vague

Dome control of stop

failed or delayed

Switch image with

vertical rolling on

monitor

If one power line links multiple domes (centralized power

supply). 24V AC connector should be linked with same

direction. Each connector end should connect to 24VAC

connector terminal; so do the other end and terminal

Dome power 1

Dome power 2

Dome power 3

Possible Reasons Solutions

Power line connection incorrect Revise

Power source damaged Replace

Fuse tube broken Replace

Power line contact poor Remove poor contact

Dome address & baud-rate setting wrong Reset dome address code & baud rate

Protocol wrong Revise

RS485 line connection inverted or open-circuit Check connection of RS485 control line

Mechanical errors Examine & repair machine

Camera slope Place well

Power inadequate Replaced with proper power supply, near to camera for better

Video circuit contact poor Remove poor contact

Power inadequate Replace

Focus by manual Operate dome or call any preset position

Dome shell dirty Clean shell

Dome power inadequate Replaced with proper power supply, near to camera for better

Check whether controlling-resistance of farthest

dome is added

Add proper resistance for farthest dome

Dome phase is wrong

MAINTAIN

～±

Please accord to operating environments.

2. Do not let dome direct to strong light objects.

No matter in working or not working, dome MUST NOT direct to the sun and other objects with strong light.

Otherwise, CCD maybe damaged permanent.

3. Do not install indoor dome in outdoor environments.

4. Electric safety, lightning proof, surge proof

In process of using this products, should accord to each item of electric safety criteria. Dome and signal line must be

at least 50 meters away from high voltage equipments & lines. If it is hard to meet the above requirements, please adopt

steel tube to wrap signal line, besides set some grounding for steel tube;

Outdoor type speed domes can prevent equipments being destroyed by under 0 4000W lightning strike, surge

and other suchlike pulse signals.

5. Transparent cover cleaning

In order to ensure dome image clear, transparent cover should timely cleaned. When cleaning, we should only hold

outer ring of transparent cover, but not directly touch the cover, otherwise acid sweat will erode the cladding material of

glass surface, moreover other rigid substance can also scratch the cover, causing image vague. So you’d better use

soft enough materials (i.e. cloth). As for serious stains, both neutral detergent and other high-quality personal

detergents are suitable.

- 7 -

6. Careful transport

Transport & storage process should avoid heavy press, intense shock and soak. This product should adopt

integrated packing transport, no matter dealer’s shipping or return to plant repairing, the damage caused by transport

method is beyond guaranty range.

7. Careful installation

Transparent cover belongs to advanced optical products, should avoid be directly touched to scratch surface and

harm image quality. Before thorough installation please do not power on.

8. Do not disassemble

Inner dome there is no DIY repaired components. The repair work must be finished by our technical staff.

ID(SW1)

5 6

1200BPS 0 0

2400BPS 1 0

4800BPS 0 1

9600BPS 1 1

ID(SW1)

1 2 3 4

PELCO-D 0 0 0 0

PELCO-P 1 0 0 0

B01 0 1 0 0

ALEC 1 1 0 0

KALATEL 0 0 1 0

LILIN 1 0 1 0

VICON 0 1 1 0

Panasonic 1 1 1 0

DAHUA 0 0 0 1

Santachi 1 0 0 1

Philips 0 1 0 1

AD 1 1 0 1

Reserved 0 0 1 1

Reserved 1 0 1 1

Reserved 0 1 1 1

Reserved 1 1 1 1

CHART OF SWITCHER SETTING

Chart A. Setting ( Baud Rate Switcher 1)

Chart B. Protocol Setting (Switcher 1)

1=ON; 0=OFF

Baud Rate

Protocols

- 8 -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung