Bernina DesignerPlus V6 Bedienungsanleitung

2009 BERNINA®of America, Inc DL Page 1 of 3

DesignerPlus V6 - Carving Stamps

Open a New File

• Select File/New or click on the New File icon.

• Right click on Show Hoop.

• Make sure Display Hoops is checked and select artista 400 x

150 Mega—Auto Split Machines.

Draw the rectangles

• Select C42 from the Color Bar.

• Select the Rectangle tool and draw a rectangle by clicking in the

upper left hand corner and dragging to the lower right hand cor-

ner.

• Press Escape.

• Select the rectangle and open Object Properties. Click on the

General tab. Make sure Proportional Scaling is turned off.

• Change the width of the rectangle to 70 mm and the height to

85 mm. Click OK.

• Quick Clone (right click and drag on the object) to make a copy

of the rectangle. Move the copy in a below the first rectangle.

• Clone the second rectangle; position below the second object.

• Select File/Save As.

• Navigate to the folder in which the file will be stores. Name the

file Carving Stamps. Click Save.

Using an Object for a Stamp

• Select File/Insert Design.

• Navigate to My Computer/C: My Designs Embroidery Software

6. Select the Animal folder. Open the folder.

• Select FB 253-48. Open the file.

• Decrease the size of the dragonfly by clicking and dragging on

one of the corner black sizing handles. Move it away from the

rectangles.

Note: Decrease th object so that it will fit within the rectangle, or

use the stamp so that only part of the object stamps the back-

ground.

• Open the Carving Stamp dialog box.

• Click on the Use Object Tab.

• Click on the Start Selecting button and use one of the selection

tools to select the dragonfly. The dragonfly will appear in the

Use Object window. Press Esc.

• Select one of the rectangles. Click on Use Stamp—the outline

of the stamp is visible.

Notes:

Carving stamp defines a pat-

tern of needle penetrations in

a fill. There are three different

ways to stamp— use a de-

sign, use a built-in stamp, or

create a custom stamp.

Any of the selection tools be

used to select the object that

will be used as a stamp.

Select part of the object by

drawing the bounding box

around part of the design or

by using Polygon Select

(remember to first ungroup).

Add stamps to selected back-

ground objects or choose to

not pre-select an object and

add the stamp to other ob-

jects.

Follow the prompts on the

lower left corner of the screen

for information on setting the

stamps.

2009 BERNINA®of America, Inc DL Page 2 of 3

• Click on one of the rectangles at the point where the

stamp will be places and move the cursor to rotate the

dragonfly as desired. Click a second time to set the stamp.

Press Esc to deactivate the stamp.

• Click on the inserted dragonfly design, Delete.

Changing the background + stamp appearance proper-

ties

• Select the rectangle. Open Object Properties.

• Click on the Fill Stitch Tab. Select Step Stitch 6; click Ap-

ply.

• Click on the Stitch Angle Tab and change the stitch angle

to 0.°

• Click OK to activate the changes and close the dialog box.

• Click on the Appearance tab of the Carving Stamp dialog

box and select Softened Stamp.

Using a pattern for a stamp

• Select the Use Pattern tab from the Carving stamp dialog

box.

• From the Set selection drop down menu choose Carving

Stamps. Scroll down to select Ring Ellipse..

• Select the ellipse. Notice that it now appears in the win-

dow.

• Select another rectangle.

• Click Use Stamp.

• To set the stamps, click on the base fill and rotate the cur-

sor to rotate the stamp as desired; click again to set the

stamp at that angle.

⇒ To increase the size of the stamp, hold the shift key

down, and drag the cursor away from the first click and

click again once the stamp reaches the desired size.

⇒ To decrease the size of the stamp, hold the shift key

down and drag the cursor toward the first click and click

again once the stamp reaches the desired size.

• Stamp the background fill as desired. Press Esc.

• Select the background rectangle. Open Object Properties

and select the Angle tab. Set the stitch angle to 90° and

click on OK.

• To remove stamps created, click, Clear All Stamps in the

Appearance tab.

Notes:

The stamp will remain active

for multiple uses until the Es-

cape key is pressed.

To save an object as a stamp

for future use, it must be

saved by adding it to the li-

brary.

Vary the type of the back-

ground fill and the angle of

the fill, for different effects.

Carving stamps can be used

with satin, step or fancy fills.

They may also be used with

satin outlines.

Visit...

www.berninausa.com

Find additional BERNINA projects ,

product information and promotions!

2009 BERNINA®of America, Inc DL Page 3 of 3

Digitizing a pattern stamp

• Click on the Digitizing tab of the Carving stamp dialog

box.

• Click on Start Digitizing button.

• Digitize the shape needed on the workspace.

⇒ Use right clicks for curves.

⇒ Use left clicks to change directions or to draw a

straight line.

⇒ Digitize the last point directly on top of the first digi-

tized point to draw a closed shape.

⇒ Press enter twice to place the digitized shape within

the digitized drawing box.

Adding a stamp to the library

• To add the digitized shape to the Carving Stamp Li-

brary, click on Add to Library.

• Click New Set and name the set. Click OK.

• Name the new stamp and click OK.

• Following the prompts digitize the first reference point

and the second reference point. (Use left clicks.) Or,

press Enter to let the software set the reference points.

• A dialog box confirms that the pattern stamp has been

created. Click OK.

• The created stamp is saved in the Use Stamp tab under

the named folder.

Using the created stamp

• Select the third rectangle.

• Click on Use Stamp to place the pattern stamps on the

background.

⇒ Hold the shift key and drag the cursor away from the

first click to enlarge the stamp as desired.

⇒ Hold the shift key and drag the cursor toward the first

click to decrease the size of the stamp.

⇒ A stamp extended beyond the parameters of the

background fill, will be stamped partially on the fill.

• Place the stamps as desired on the background.

• Open Object Properties and click on the Fill Stitch tab.

• Select step fill # 4.

• Click on Apply.

• Select the Stitch angle tab.

• Change the angle to 95°. Click on OK.

• Make sure the rectangle is selected.

• Click on the Appearance tab.

• Select the Raised stamp option.

• Save the design.

It is necessary to complete

the entire shape, pressing

enter will not close the ob-

ject..

No spaces or punctuation

should be in the name of the

file.

The reference line sets the

baseline of the stamp.

Rename and delete custom

stamps by right clicking and

choosing the desired option.

Reshape the carving stamps

by selecting the background

object and selecting the Re-

shape icon.

Move, rotate, scale, reshape,

or delete. See pages 251-253

in the Help Manual.

Vectors shapes from Art

Canvas may be used as

carving stamps.

Care must be used when

changing the Raised appear-

ance of a stamp since satin

stitches are added. Switch to

Design View and check for

any streaked lines in the

stitching—these indicate

satin stitches are too long.

Andere Bernina Software Handbücher

Bernina

Bernina EMBROIDERY 6 SP1 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung