- 10 -
•Fixingthedecorativetelescopicflue:
Arrange the electrical power supply within the dimensions of the decorative flue. If your
appliance is to be installed in the ducting version or in the version with external motor,
prepare the air exhaust opening. Adjust the width of the support bracket of the upper flue
(Fig.4).Then fix it to the ceiling using the screws A(Fig.4) in such a way that it is in line with
your hood and respecting the distance from the ceiling indicated in Fig.3. Connect the
flange Cto the air exhaust hole using a connection pipe (Fig.5). Insert the upper flue into
the lower flue. Fix the lower flue to the hood using the screws Bprovided (Fig.5), extract
the upper flue up to the bracket and fix it with the screws B(Fig.4).
USE
•Theapparatusisequippedwiththefollowingcontrols(Fig.6):
Push-buttonA= On/off cooker hood switch.The appliance switches on at speed level 1,
If the cooker hood is on depress the push-button for 2 sec. to switch off the cooker hood.
If the cooker hood is at speed level 1 it will not be necessary to depress the push-button
to switch the cooker hood off. Decreases the motor speed.
Push-buttonB= On/off lights switch.
DisplayC= Indicates the motor speed level selected and activates the timer.
Push-buttonD= Switches on the cooker hood. Increases the motor speed. Touching the
key at 3rd speed, the intensive function runs for 10’, then the appliance go back to work
at the original speed. During this function the display blinks.
KeyE= The Timer times the functions on activation for 15 minutes, after which they are
switched off. The Timer is deactivated by re-pressing Key E. When the Timer is activated
the decimal point must flash on the display. TheTimer cannot be activated if the intensive
speed is functioning.
The “clean air”function is activated by pressing key Efor 2 seconds when the appliance
is switched off. This switches the motor on for 10 minutes every hour at the first speed.
During functioning a rotary movement of the peripheral segments must be visualised
on the display. When this time has passed the motor switches off and the fixed letter“C”
must be visualised on the display until the motor re-starts after 50 minutes for another 10
minutes and so on. Press any key apart from the light keys to return to normal functioning.
Press key Eto deactivate the function.
•Activecarbon/greaseltersaturation:
-When display item Cashes, at a speed where it alternates with the letter F (e.g. 1 and
F), the grease lters must be washed.
-When display item Cashes, at a speed where it alternates with the letter A (e.g. 1 and
A), the carbonlters must be replaced.
After the clean lter has been positioned correctly, the electronic memory must be reset
by pressing button Afor approximately 5 seconds, until the indication For Ashown on
the display Cstops ashing.
MAINTENANCE
•We recommend that the range hood is switched on before any food is cooked. We also
