
UNFOLDING
1. Folded stroller. (picture 1)
2. To unfold the stroller pull out the levers (1) located on the both handles and push the transport handle
down (2). Lift the handle of the stroller up and the stroller will unfold and lock automatically. (picture 2)
3. Check the locking of the front tubes into the locks above the front wheels. (fig.A)
4.Correctly unfolded stroller should look as the same way shown in picture 3.
ASSEMBLING
INSTALLATION/UNINSTALLATION OF THE FRONT WHEELS
1. Insert the front wheel into the plastic elements on the front part of the stroller until “click” sound is
heard. (picture 4) Repeat the same operation for the other wheel.
2. To remove the wheel press the lever on its bottom side and pull the wheel out. (picture 5) Repeat
the same operation for the other wheel.
INSTALLATION/UNINSTALLATION OF THE REAR WHEELS
1. Insert the rear wheel into the rear pipe of the metal construction. The metal fixar (1) should be into the
opening (2). (picture 6) Repeat the same operation for the other wheel.
2. To remove the wheels press the metal fixer (1) by using a screw-driver and pull them out (2). (picture 7)
INSTALLATION/UNINSTALLATION OF THE SEAT
1. Install the plastic elements located on the both sides of the textile part of the seat to the plastic
pad. (picture 9)
2. Attach the textile part of the seat to the plastic pad by using the “tic-tac” caps. (picture 10)
3. To remove the textile part unbutton all the “tic-tac” caps and release the plastic elements of the
seat from the plastic pad.
INSTALLATION/UNINSTALLATION OF THE FRONTBAR
The frontbar can be opened only from the one side to allows the child to get in and out from the
stroller easily when grows up.
1. Install the frontbar into the plastic elements of the stroller until “click” sound is heard. (picture 11)
2. To unlock the frontbar press the button (1) on its bottom side and pull it out (2). (picture 12)
3. To lock the frontbar insert it in the armrest until it “clicks”.
4. To remove the frontbar press the both buttons (1) and pull it out (2). (picture 13)
Warning! Do not remove the frontbar when a child is in the stroller! Do not put hot drinks on
the frontbar! This may be dangerous! Do not pick up the stroller by using the frontbar! This
leads to incorrigible damages!
INSTALLATION/UNINSTALLATION OF THE CANOPY
1. To install the canopy slide its clamps down until they are fixed as shown on picture 14.
2. Button the caps of the canopy from the inside and outside side.
3. To remove the canopy unbutton the “tic-tac” caps on its inside and outside side. Lift the lever (1) up
and slide the clamp of the canopy up (2).(picture 15)
INSTALLATION OF THE SHOPPING BASKET
1. To install the shopping basket hang the brackets to the front and rear hooks as shown on picture 8a
and 8b.